Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Green synthesis of silver nanoparticles from Thymus vulgaris and Sambucus nigra extracts in poly (vinyl alcohol) nanofiber matrix: In vitro evaluation

Tavukcuoglu O., Evcimen Duygulu N., ALTINBAY A., Ciftci F.
Industrial Crops and Products , cilt.222, 2024 (SCI-Expanded) identifier

Effect of concentration on PVA solutions and its usage in recycling carbon fiber/polyamide 12 prepregs

ALTINBAY A.
Materialpruefung/Materials Testing , cilt.66, sa.10, ss.1693-1699, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma identifier

Antibacterial, Mechanical, and Thermal Properties of Ag, ZnO, TiO2 Reinforced PVA Nanocomposite Fibers

Duygulu N., Altinbay A., Ciftci F.
ChemistrySelect , cilt.9, sa.30, 2024 (SCI-Expanded) identifier

In-situ self-reinforcement of amorphous polylactide (PLA) through induced crystallites network and its highly ductile and toughened PLA/poly(butylene adipate-co-terephthalate) (PBAT) blends

Eraslan K., Altınbay A., Nofar M.
International Journal of Biological Macromolecules , cilt.272, 2024 (SCI-Expanded) identifier identifier

Poly(glycidyl methacrylate) modified cellulose nanocrystals and their PBAT-based nanocomposites

Arslan Ö. F., Güntürkün D., Göksu Y. A., Altınbay A., Özer H. Ö., Nofar M.
International Journal of Biological Macromolecules , cilt.253, 2023 (SCI-Expanded) identifier identifier

Effects of copper fillers on mechanical and electrical properties of selective laser sintered PA 12-Cu composites

Ozbay B., BEKEM A., Serhatlı İ. E., ÖZTÜRK S., Bulduk M. E.
MATERIALS TECHNOLOGY , cilt.37, sa.10, ss.1541-1553, 2022 (SCI-Expanded) identifier identifier

Effect of dendritic copper powder addition to polyamide 12 in selective laser sintering

Bekem A., Ozbay B., Bulduk M. E.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.36, sa.1, ss.421-431, 2021 (SCI-Expanded) Creative Commons License identifier identifier identifier

Effect of fillers on vinylester matrix composites

Topalomer N., Bekem A., Keleşoğlu E., Ünal A.
MATERIALS TESTING , cilt.61, ss.681-684, 2019 (SCI-Expanded) identifier identifier

Mechanical properties of PE/E-glass commingled yarn wound pipes and pipe elbows

BEKEM A., ÜNAL A.
MATERIALS TESTING , cilt.60, sa.4, ss.373-377, 2018 (SCI-Expanded) identifier identifier

The Effects of Local and Systemic Administration of Proline on Wound Healing in Rats

Aydın H., Tatar C., Savas O. A., Karsıdag T., Ozer B., Dursun N., et al.
JOURNAL OF INVESTIGATIVE SURGERY , cilt.0, ss.1-7, 2018 (SCI-Expanded)

The effects of platelet-rich plasma on wound healing in rats

Tatar C., Aydın H., Karşıdağ T., Arıkan S., Kabukcuoğlu F., Doğan O., et al.
INTERNATİONAL JOURNAL OF CLİNİCAL AND EXPERİMENTAL MEDİCİNE , cilt.10, sa.5, ss.7698-7706, 2017 (SCI-Expanded)

Tensile properties of continuous E-glass and basalt fiber reinforced polypropylene composites

Bekem A., Doğu M., Ünal A.
MATERIALS TESTING , cilt.59, ss.11-15, 2017 (SCI-Expanded) identifier identifier

Investigation of joints between polypropylene and polybutylene terephthalate

Bekem A., Ünal A.
MATERIALS TESTING , cilt.57, ss.458-461, 2015 (SCI-Expanded) identifier identifier

Biomechanical strength of glass ionomer cement in incudostapedial rebridging

Server E. A., Alkan Z., Yiğit Ö., Acıoğlu E., BEKEM A., ÜNAL A., et al.
JOURNAL OF LARYNGOLOGY AND OTOLOGY , cilt.129, sa.2, ss.148-154, 2015 (SCI-Expanded) identifier identifier identifier

Importance of nasal septal cartilage perichondrium for septum strength mechanics: a cadaveric study

Tekke N. S., Alkan Z., Yiğit O., BEKEM A., ÜNAL A., Şahin F., et al.
RHINOLOGY , cilt.52, sa.2, ss.167-171, 2014 (SCI-Expanded) identifier identifier

Aramid-HDPE Composites: Influence of Interface Adhesion Measured by T-peel Test on Tensile Properties

BEKEM A., DOĞU M., Gemici Z., ÜNAL A., GÜLER M. H.
MATERIALS TESTING , cilt.56, sa.5, ss.369-374, 2014 (SCI-Expanded) identifier identifier

Determining the Most Suitable Costal Cartilage Level for Rhinoplasty: An Experimental Study

Alkan Z., Acıoğlu E., Yiğit O., BEKEM A., Azizli E., ÜNAL A., et al.
OTOLARYNGOLOGY-HEAD AND NECK SURGERY , cilt.146, sa.3, ss.377-381, 2012 (SCI-Expanded) identifier identifier identifier

Tensile Characteristics of Costal and Septal Cartilages Used as Graft Materials

Alkan Z., Yiğit O., Acıoğlu E., BEKEM A., Azizli E., Kocak I., et al.
ARCHIVES OF FACIAL PLASTIC SURGERY , cilt.13, sa.5, ss.322-326, 2011 (SCI-Expanded) identifier identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Determination of Design Criteria for Composite Drive Shaft in Automobiles

ALTIN B., Altınbay Bekem A., Ünal A.
Politeknik Dergisi , cilt.27, sa.2, ss.721-729, 2024 (ESCI) Creative Commons License identifier

Manufacturing of Hybrid Yarn Thermoplastic Composites by the Method of Filament Winding

Ozbay B., BEKEM A., ÜNAL A.
GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.33, sa.1, ss.214-227, 2020 (ESCI) Creative Commons License identifier identifier

Inkudostapedial Bağlantı Süreksizliklerinin Onarımında Kullanılan Cam İyonomer Çimentosunun Biyomedikal Özellikleri

ÜNAL A., BEKEM A., Araz Server E., ALKAN Z., YİĞİT Ö.
Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.18, sa.3, ss.152-156, 2014 (Hakemli Dergi)

Isıl İşlemin Emaye Özellikleri Üzerine Etkisinin İncelenmesi

DUYGULU N., BEKEM A.
Türkiye Seramik Federasyonu Dergisi , cilt.20, ss.140-149, 2013 (Hakemsiz Dergi)

İZOFTALİK POLYESTER MATRİSLİ SÜREKLİ E-CAMI VE BAZALT FİBER TAKVİYELİ KOMPOZİTLERİN MEKANİK ÖZELLİKLERİ ÜZERİNE DENEYSEL BİR ÇALIŞMA

GÜMÜLCİNE T., BEKEM A., DOĞU M., GEMİCİ Z., ÜNAL A.
Sigma: Journal of Engineering Natural Sciences / Mühendislik ve Fen Bilimleri Dergisi , cilt.5, ss.104-115, 2013 (Hakemli Dergi)

SÜREKLİ E-CAM FİBER TAKVİYELİ POLİPROPİLEN KOMPOZİTLERİN ÜRETİMİ VE KARAKTERİZASYONU

BAYDAR D. G., BEKEM A., DOĞU M., GEMİCİ Z., ÜNAL A.
Sigma: Journal of Engineering Natural Sciences / Mühendislik ve Fen Bilimleri Dergisi , cilt.30, ss.120-132, 2012 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Mechanical Properties of Flax Fabric/PLA Biodegradable Composites

Altınbay A.
9th Polymer Science and Technology Congress (PolymerTR), Ankara, Türkiye, 16 - 18 Eylül 2024, ss.162

In-Situ Self-Reinforcement of Amorphous PLA and Its Incorporation into PLA/PBAT Blends

Nofar M., Eraslan K., Altınbay A.
9th Polymer Science and Technology Congress (PolymerTR), Ankara, Türkiye, 16 - 18 Eylül 2024, ss.17

Examination of Mechanical Properties and Cost Impact of Thermoset Composites Produced with Different Manufacturing Methods in the Production of Unmanned Aerial Vehicle Wing Skins

Sayın F. E., Altınbay A., Ünal A.
5th International 5 Ocak Congress on Applied Sciences , Adana, Türkiye, 5 - 06 Ocak 2024, ss.56-57

Dependency of morphological and mechanical performance of PLA/PBAT blends and their reactively compatibilized counterparts on melt viscoelastic properties of the blending components

Altınbay A., Özsaltık C., Akdevelioğlu Y., Özdemir B., Nofar M.
International Congress of Rheology (ICR2023), Athens, Yunanistan, 29 Temmuz - 04 Ağustos 2023, ss.22

Surface Modification of Cellulose Nanocrystal (CNC) and its Dispersion in PLA matrix

Arslan O. N., Güntürkün D., Özdemir B., Altınbay A., Alkan Göksu Y., Nofar M.
EPF European Polymer Congress (EPF 2022), Praha, Çek Cumhuriyeti, 26 Haziran - 01 Temmuz 2022, ss.259

Effect of Fly Ash Filler on Mechanical Performance of E-glass/Polyester Composites

Bekem A., Birol B., Duygulu N.
19th International Metallurgy and Materials Congress (IMMC2018), İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.700-702 Creative Commons License

EFFECT OF ADDITION FILLER TO PA 12 COATING

Bekem A., Duygulu N., Birol B.
4TH INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES (ICENS 2018), Kyyiv, Ukrayna, 2 - 06 Mayıs 2018, ss.192 Creative Commons License

Composite Pipe Production with Polypropylene/Glass Fiber Commingled Yarn

ÜNAL A., BEKEM A.
CONFERENCE ON MATERIALS SCIENCE AND NANOTECHNOLOGY FOR NEXT GENERATION (MSNG2017), Saraybosna, Bosna-Hersek, 28 Haziran 2017, ss.112

A Lifetime Determination Method For Prepreg-Wound PE Composite Pipes

Ünal A., Bekem A., Doğu M., Gemici Z., Baydar D. G., Güler M. H.
10. Uluslararası Kırılma Konferansı, Kayseri, Türkiye, 24 Nisan 2014, ss.199-209

Reprocessing of fibre reinforced polyethylene composites, effects on mechanical properties

ÜNAL A., Bekem A., Ünal A. R.
Advanced Material World Congress (AMWC2013), 01 Eylül 2013

Investigation of Mechanical Properties of Aramid Fiber Reinforced HDPE Composite

BEKEM A., DOĞU M., GEMİCİ Z., ÜNAL A.
9TH INTERNATIONAL CONFERENCE ON COMPOSITE SCIENCE AND TECHNOLOGY: 2020 - SCIENTIFIC AND INDUSTRIAL CHALLENGES, Naples, İtalya, 24 - 26 Nisan 2013, ss.712-722

Determination of the Effects of Recycling on Polyolefin Matrix Composites

ÜNAL A., Bekem A., Ünal A. R., Güler M. H.
9th International Conference on Composite Science (ICCST9), 01 Nisan 2013

A NOVEL LIFETIME PREDICTION METHOD FOR REINFORCED THERMOPLASTIC PIPES UNDER INTERNAL PRESSURE

ÜNAL A., DOĞU M., GEMİCİ Z., BEKEM A., BAYDAR D. G.
16th International Conference on Composite Structures - ICCS 16, Porto, Portekiz, 28 - 30 Haziran 2011

INVESTIGATION OF MECHANICAL PROPERTIES OF BASALT FIBER REINFORCED THERMOPLASTIC COMPOSITES

BEKEM A., DOĞU M., GEMİCİ Z., BAYDAR D. G., ÜNAL A.
16th International Conference on Composite Structures - ICCS16, Porto, Portekiz, 28 - 30 Haziran 2011

Oblik Split ve Klasik Yöntemlerle Hazırlanmış Kostal Kartilaj Greftlerinin Biyomekanik Özelliklerinin Karşılaştırılması

Şener B. M., Bekem A., Şahin F., ÜNAL A., Yiğit Ö.
9. Türk Rinoloji Kongresi

Metrikler

Yayın

39

Atıf (WoS)

21

H-İndeks (WoS)

3

Atıf (Scopus)

70

H-İndeks (Scopus)

5

Atıf (Scholar)

1

H-İndeks (Scholar)

1

Atıf (TrDizin)

1

H-İndeks (TrDizin)

1

Proje

6

Açık Erişim

2
BM Sürdürülebilir Kalkınma Amaçları