Prof. Halil &#214;ZER

REVIEWS OF ADHESION AND ADHESIVES , vol.6, no.1, pp.82-103, 2018 (ESCI, Scopus)

8. The effects of curing temperature on fracture energy and cohesive parameters for the adhesive Araldite 2015

ÖZER H., Erbayrak E.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , vol.32, no.12, pp.1287-1312, 2018 (SCI-Expanded, Scopus)

9. EFFECT OF ADHESIVE TYPE ON FREE TRANSVERSE VIBRATION OF SINGLE LAP JOINT

ERBAYRAK E., ÖZER H., ERBAYRAK S., ÇEPER K., AĞIRKOL B., GÜNER E.

INTERNATIONAL JOURNAL OF ADVANCES ON AUTOMOTIVE AND TECHNOLOGY , vol.2, pp.104-107, 2018 (Peer-Reviewed Journal)

10. The use of the exponential Drucker-Prager material model for defining the failure loads of the mono and bi-adhesive joints

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , vol.76, pp.17-29, 2017 (SCI-Expanded, Scopus)

11. An experimental investigation on the failure loads of the mono and bi-adhesive joints

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , vol.31, pp.2251-2270, 2017 (SCI-Expanded, Scopus)

12. Hibrit Yapıştırma Düzeninin Bindirme Bağlantı Mukavemetine Etkileri

Mühendis ve Makina , vol.57, pp.63-72, 2016 (TRDizin)

13. On the von Mises elastic stress evaluations in the bi-adhesive single-lap joint: a numerical and analytical study

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY , vol.28, no.21, pp.2133-2153, 2014 (SCI-Expanded, Scopus)

14. Variational Principles for Bending and Vibration of Partially Composite Timoshenko Beams

MATHEMATICAL PROBLEMS IN ENGINEERING , 2014 (SCI-Expanded, Scopus)

15. A Comparative Evaluation of Numerical and Analytical Solutions to the Biadhesive Single-Lap Joint

MATHEMATICAL PROBLEMS IN ENGINEERING , 2014 (SCI-Expanded, Scopus)

16. Three dimensional finite element analysis of bi-adhesively bonded double lap joint

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES , vol.37, pp.50-55, 2012 (SCI-Expanded, Scopus)

17. The Effects of the Aging Heat Treatment on Buckling Load of 7075 Aluminum Alloy Rectangular Plate

e-Journal of New World Sciences Academy , vol.8, pp.263-271, 2009 (Peer-Reviewed Journal)

18. A variational formulation and analysis of polar orthotropic circular plates using an energy principle, part II: Thick plates

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , vol.15, no.1, pp.59-70, 2008 (SCI-Expanded, Scopus)

19. Application of the variational iteration method to thin circular plates

INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION , vol.9, no.1, pp.25-30, 2008 (SCI-Expanded, Scopus)

20. A comparative analysis of Mindlin and Kirchhoff bending solutions for nonlinearly tapered annular plate with free edges

ARCHIVE OF APPLIED MECHANICS , vol.77, no.6, pp.393-405, 2007 (SCI-Expanded, Scopus)

21. A Variational Formulation and Analysis of Polar Orthotropic Circular Plates Using an Energy Principle Part I Thin Plates

ÖZER H.

Science and Engineering of Composite Materials , vol.14, pp.317-328, 2007 (SCI-Expanded, Scopus)

22. Application of the variational iteration method to the boundary value problems with jump discontinuities arising in solid mechanics

INTERNATIONAL JOURNAL OF NONLINEAR SCIENCES AND NUMERICAL SIMULATION , vol.8, no.4, pp.513-518, 2007 (SCI-Expanded, Scopus)

23. A computer software for simulating single-compartmental model of neurons

Ozer M., Isler Y., Ozer H.

COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE , vol.75, no.1, pp.51-57, 2004 (SCI-Expanded, Scopus)

24. Aspects of the Gurson Model and its Applications

ÖZER H., Günay D.

MATHEMATİCAL AND COMPUTATİONAL APPLİCATİONS , vol.8, no.3, pp.327-334, 2003 (TRDizin)

25. Düz Dişlilerde Profil Kaydırma Faktörünün, Çatlak İlerleme Yolu Üzerindeki Etkisi (The Effect of Addendum Modification Coefficient on Crack Propogation Path at Addendum Modificated Gears)

ÖZER H., Günay D.

Makine Tasarımı ve İmalat Dergisi (Journal of Mechanical Design and Production) , vol.4, no.2, pp.89-95, 2001 (Peer-Reviewed Journal)

26. Enine Dikişli Kaynak Bağlantılarında Gerilme Analizi (Stress Analysis in the Transverse Fillet Weld Joints)

Elmas M., Aydemir A., Çaağlar N., ÖZER H.

Mühendislik Bilimleri Dergisi (Journal of Engineering Sciences) , vol.3, no.2, pp.323-329, 1997 (Peer-Reviewed Journal)

27. Düz Dişlilerde Jant Kalınlığının Diş Kökü Gerilmeleri Üzerindeki Etkisi (Effect of Rim Thickness on the Root Stresses of Spur Gear Tooth)

ÖZER H., Aydemir A.

Mühendislik Bilimleri Dergisi (Journal of Engineering Sciences) , vol.3, no.1, pp.299-303, 1997 (Peer-Reviewed Journal)

28. Torsional Stresses in the Transverse Fillet Weld Tubular Joints

ÖZER H., Aydemir A.

MATHEMATİCAL AND COMPUTATİONAL APPLİCATİONS , vol.1, no.1, pp.29-35, 1996 (TRDizin)

29. The Effect of Addendum Modification Coefficient on Tooth Stresses of Spur Gear

ÖZER H., Aydemir A.

MATHEMATİCAL AND COMPUTATİONAL APPLİCATİONS , vol.1, no.1, pp.36-43, 1996 (TRDizin)

Papers Presented at Peer-Reviewed Scientific Conferences 40

1. Variational Approach for Solving Nonlinear Differential Equations Arising in Functionally Graded Adhesive Joints

ÖZER H.

Euro Asia 4. International Congress on Applied Sciences, KIEV, Ukraine, 27 - 29 September 2019, pp.30, (Full Text)

2. NUMERICAL INVESTIGATION OF DYNAMIC BEHAVIOR OFCOMPOSITE BEAMS CONNECTED WITH SINGLE-LAP JOINT

USAL M. M. A., ÖZER H.

International Natural Science, Engineering and Materials Technology Conference, 9 - 10 September 2019, (Summary Text)

3. Study on the Self-Healing Efficiency of Araldite Av138M Adhesive

ERBAYRAK E., ÖZER H.

3rd International Conference on Advanced Engineering Technologies, Bayburt, Turkey, 19 - 21 September 2019, (Full Text)

4. Çekmeye Maruz Köşeleri Yuvarlatılmış Basamaklı BindirmeBağlantısının Gerilme Analizi

ÇALIK A., ÖZER H.

3rd International Mediterranean Science and Engineering Congress (IMSEC 2018), Adana, Turkey, 24 - 26 October 2018, vol.1, pp.1634-1635, (Full Text)

5. Sultan II. Abdülhamid Döneminde Osmanlıda Teknoloji

Koyun A., Özer H., Şahin İ., Kıyak M.

Vefatının 100. Yılında Sultan II. Abdülhamid ve Dönemi Uluslararası Kongresi, İstanbul, Turkey, 22 - 24 October 2018, pp.390-391, (Summary Text)

6. Sultan II. Abdülhamid Döneminde Osmanlıda Teknoloji

Koyun A., Özer H., Şahin İ., Kıyak M.

Vefatının 100. Yılında Sultan II. Abdülhamid ve Dönemi Uluslararası Kongresi, İstanbul, Turkey, 22 October 2018, pp.390-391, (Full Text)

7. EFFECT OF ADHESIVE TYPE ON FREE TRANSVERSE VIBRATION OF SINGLE LAP JOINT

ERBAYRAK E., ÖZER H., ERBAYRAK S., çeper k., ağırkol b., güner e.

3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 201719-21 December 2017, Yildiz Technical University, Istanbul, Turkey, 19 - 21 December 2017, (Full Text)

8. Evaluating the Repair Performance of the Cracked Plate Using Adhesive Shear Stresses

ÖZER H., Çay M.

5th International Symposium on Innovative Technologies inEngineering and Science, Baku, Azerbaijan, 29 - 30 September 2017, pp.1746-1752, (Full Text)

9. ADHESIVE-RECESSING EFFECT ON SHEAR STRESSES ARISING IN SINGLE LAP JOINT

ÖZ Ö., ÇEVİK ELEN N., ÖZER H.

Uluslararası Mühendislik Araştırmaları Sempozyumu, Düzce, Turkey, 11 - 13 September 2017, (Summary Text)

10. Numerical and Analytical Investigations on The Stress Distributions in Single Lap Joints

4th International Symposium on Innovative Technologies in Engineering and Science (ISITES2016), Antalya, Turkey, 3 - 05 November 2016, pp.625-634, (Full Text)

11. Experimental Determination of Mode I Fracture Toughness of Araldite AV138M Adhesive

ERBAYRAK E., Özer H., Erbayrak S.

5th International Conference on Fracture and Damage Mechanics, 01 September 2016, (Full Text)

12. EXPERIMENTAL AND NUMERICAL STUDY ON DETERMINATION OF CRITICAL BUCKLING LOAD FOR SINGLE LAP JOINT

ERBAYRAK E., Özer H., Özertuğ B., Özbek T., Özdemir Y.

INTERNATIONAL CONFERENCE ON ENERGY SYSTEMS, 01 December 2015, (Full Text)

13. Effect of Loading Rate on Fracture Energy and Cohesive Parameters of Araldite 2015

ÖZER H.

01 July 2015, (Full Text)

14. Effect of Loading Rate on Fracture Energy and Cohesive Parameters of Araldite 2015. 3rd International Conference on Structural Adhesive Bonding

Özer H.

3rd International Conference on Structural Adhesive Bonding, 01 July 2015, (Full Text)

15. Stiffness Prediction for Bi adhesive Single Lap joints

1st International Conference on Engineering and Natural Sciences (ICENS), Skopje, Macedonia, 15 - 19 May 2015, (Full Text)

16. Effects of the Mono and Bi adhesive Bondlines on the Shear Stresses in a Cracked Plate Repaired by the Boron epoxy Patch

ÖZER H., Çay M.

International Conference on Advances in Mechanical Engineering (ICAME'15), İstanbul, Turkey, 13 - 15 May 2015, (Full Text)

17. Vakum Ortamında Karıştırma İşleminin Araldite 2015 Epoksi Yapıştırıcının Hasar Yükü Üzerine Etkisi

15th International Materials Symposium (IMSP’2014), Denizli, Turkey, 15 - 17 October 2014, pp.1-8, (Full Text)

18. Determination of Mode 1 Fracture Toughness for Araldite 2015 Epoxy A Comparative Study

ERBAYRAK E., ÖZER H.

31st Danubia-Adria Symposium on Advances in Experimental Mechanics, Kempten, Germany, 24 September - 27 April 2014, pp.19-20, (Full Text)

19. Comparative Analysis of the Beam Length Effect on Free Vibration of Cracked Beams

ÖZER H., Ornek M. A.

01 July 2012, (Full Text)

20. Joint Stress Optimization by the Hybrid Adhesive Lap Joint