Publications & Works

Publication Network
Published journal articles indexed by SCI, SSCI, and AHCI

Revolutionary optimization: Synthetic fiber-reinforced geopolymer mortars with metazeolite and red mud for unmatched durability and sustainability

Aygun B. F., Uysal M.
Materials Today Sustainability , vol.29, no.101062, pp.1-23, 2025 (SCI-Expanded)

Properties of High-Strength Fibre Reinforced Self-Compacting Repair Mortars Enhanced with Nano-silica and Marble Powder

Bendjilali F., Soualhi H., Belaidi A. S. E., Uysal M., Mansour M. S., Makhlouf A., et al.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY - TRANSACTIONS OF CIVIL ENGINEERING , vol.49, no.1, pp.1-21, 2025 (SCI-Expanded)

Comparison of Bacterial Healing Performances of Cave Bacteria and Sporosarcina pasteurii in Cement-Based Mortar

Ali I., Canpolat O., Doğruöz Güngör N., Yüzer N., Uysal M., Tanyıldızı H., et al.
Processes , vol.13, no.3, pp.1-25, 2025 (SCI-Expanded)

Alternating current curing of conductive fly ash-slag geopolymer mortars: performance, characterization and optimization

Aygun B. F., Uysal M., Bilir T., Çoşgun T., Dilbas H.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , vol.25, no.46, pp.1-23, 2025 (SCI-Expanded)

An investigation on physical, mechanical and microstructural properties of electricity-based cured GBFS-FA geopolymer

Aygun B. F., Uysal M., Bilir T., Çoşgun T., Dilbas H.
CONSTRUCTION AND BUILDING MATERIALS , vol.458, no.139526, pp.1-21, 2025 (SCI-Expanded)

Multi‑criteria decision‑making optimization‑based fber‑reinforced waste ceramic powder‑based geopolymer: toward a sustainable net zero/low CO2 emission building material

Kilic A. T., Uysal M., Aygun B. F., Nazir K., Canpolat O., Dilbas H.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , vol.24, no.242, pp.1-22, 2024 (SCI-Expanded)

Innovating with Potassium-Modified Ceramic Powder Geopolymer Mortar and the Integration of Recycled Aggregates

Kotanci I., Uysal M., Balaban M., Bendjilali F., Aygun B. F.
JOURNAL OF BUILDING ENGINEERING , vol.92, no.109751, pp.1-22, 2024 (SCI-Expanded)

Nanographene oxide modified fiber reinforced cementitious composites: Thermomechanical behaviour, environmental analysis and microstructural characterization

Yıldırım P., ERDEM S., UYSAL M.
Ceramics International , vol.50, no.12, pp.21909-21925, 2024 (SCI-Expanded) Sustainable Development identifier

Unraveling the characteristics of geopolymer mortars: A deep dive into the impact of marble powder as fine aggregate and varied activators

Bilir T., Aygörmez Y., Bastan Z., Uysal M., Aygun B. F.
CONSTRUCTION AND BUILDING MATERIALS , vol.422, no.135767, pp.1-30, 2024 (SCI-Expanded)

Red-mud additive geopolymer composites with eco-friendly aggregates

Uysal M., Dilbas H., Çoşgun T., Bendjilali F.
CONSTRUCTION AND BUILDING MATERIALS , vol.425, pp.1-10, 2024 (SCI-Expanded)

The influence of carbon nanotube on underwater geopolymer paste based on metakaolin and slag

Zıada M., Tanyıldızı H., Uysal M.
CONSTRUCTION AND BUILDING MATERIALS , vol.414, no.135047, pp.1-14, 2024 (SCI-Expanded)

Exploration of Fiber-Reinforced Geopolymer Mortars Containing Recycled Aggregates and Marble Powder

Yılmaz A., Ergün S., Uysal M., Aygörmez Y., Aygun B. F.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.48, no.12, pp.1-24, 2023 (SCI-Expanded)

Engineering properties of different fiber-reinforced metakaolin-red mud based geopolymer mortars

Nazir K., Canpolat O., Uysal M., Niş A., Kuranli O. F.
CONSTRUCTION AND BUILDING MATERIALS , vol.385, no.131496, pp.1-15, 2023 (SCI-Expanded)

Durability properties of steel, polyamide, and polyethylene fiber-reinforced geopolymer mortar made with recycled concrete aggregate and glass powder as fillers

Nazır K., Canpolat O., Uysal M.
JOURNAL OF BUILDING ENGINEERING , vol.76, pp.1-15, 2023 (SCI-Expanded) Sustainable Development

Metakaolin-Based and Blast Furnace Slag-Activated Geopolymer Cement with Waste Powders

Kabirova A., Hüsem M., Dilbas H., Uysal M., Canpolat O.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING , vol.47, no.2, pp.891-907, 2023 (SCI-Expanded) Sustainable Development identifier identifier

Bacterial healing of geopolymer concrete exposed to combined sulfate and freeze-thaw effects

Ziada M., Tanyıldızı H., Uysal M.
CONSTRUCTION AND BUILDING MATERIALS , vol.369, pp.1-13, 2023 (SCI-Expanded)

Combined effect of using steel fibers and demolition wasteaggregates on the performance of fly ash/slag basedgeopolymer concrete

Lakew A. M., Canpolat O., Al-Mashhadani M. M., Uysal M., Niş A., Aygörmez Y., et al.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING , vol.27, no.4, pp.1-28, 2023 (SCI-Expanded) identifier identifier

The effect of various fibers on the red mud additive sustainable geopolymer composites

Uysal M., Faruk Kuranlı Ö., Aygörmez Y., Canpolat O., Çoşgun T.
CONSTRUCTION AND BUILDING MATERIALS , vol.363, no.129864, pp.129864, 2023 (SCI-Expanded) identifier identifier

Mechanical and durability properties of steel, polypropylene and polyamide fiber reinforced slag-based alkali-activated concrete

Kuranli O. F., Uysal M., Abbas M. T., Cosgun T., Nis A., Aygörmez Y., et al.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING , vol.27, no.1, pp.114-139, 2023 (SCI-Expanded) Sustainable Development identifier identifier

Physical and mechanical properties of metakaolin-based geopolymer mortars containing various waste powders

Kabirova A., Uysal M., Hüsem M., Aygörmez Y., Dehghanpour H., Pul S., et al.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING , vol.27, no.1, pp.437-456, 2023 (SCI-Expanded) identifier identifier

Investigation of using waste marble powder, brick powder, ceramic powder, glass powder, and rice husk ash as eco-friendly aggregate in sustainable red mud-metakaolin based geopolymer composites

Uysal M., Aygörmez Y., Canpolat O., Cosgun T., Faruk Kuranlı Ö.
Construction and Building Materials , vol.361, 2022 (SCI-Expanded) Sustainable Development identifier identifier

Effect of Waste Filler Materials and Recycled Waste Aggregates on the Production of Geopolymer Composites

Tammam Y., Uysal M., Canpolat O., Kuranlı Ö. F.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.47, no.8, pp.1-18, 2022 (SCI-Expanded)

Relative Performance of Limestone, Marble, and Basalt Powders in Replacement of a Recycled Fine Aggregate from Red Mud and Metakaolin-Based Geopolymer Mortar

Chakkor O., Altan M. F., Canpolat O., Dilbas H., Uysal M.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING , vol.46, no.4, pp.2961-2974, 2022 (SCI-Expanded) Sustainable Development identifier identifier

Comparison of bacteria-based self-healing methods in metakaolin geopolymer mortars

Tanyıldızı H., Ziada M., Uysal M., Doğruöz Güngör N., Coşkun A.
CASE STUDIES IN CONSTRUCTION MATERIALS , vol.16, pp.1-13, 2022 (SCI-Expanded)

Durability properties of fly ash-based geopolymer mortars with different quarry waste fillers

Tammam Y., Uysal M., Canpolat O.
COMPUTERS AND CONCRETE , vol.29, no.5, pp.335-346, 2022 (SCI-Expanded) Sustainable Development identifier identifier

Evaluation of slag/fly ash based geopolymer concrete with steel, polypropylene and polyamide fibers

Kuranli O. F., Uysal M., Abbas M. T., Cosgun T., Nis A., Aygörmez Y., et al.
CONSTRUCTION AND BUILDING MATERIALS , vol.325, 2022 (SCI-Expanded) Sustainable Development identifier identifier

Effects of alternative ecological fillers on the mechanical, durability, and microstructure of fly ash-based geopolymer mortar

Tammam Y., Uysal M., Canpolat O.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING , vol.26, no.12, pp.5877-5900, 2022 (SCI-Expanded) Sustainable Development identifier identifier

Mechanical and durability properties of slag/fly ash based alkali-activated concrete reinforced with steel, polypropylene and polyamide fibers

Kuranli O. F., Uysal M., Canpolat O.
EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING , vol.26, no.16, pp.8390-8413, 2022 (SCI-Expanded) identifier identifier

Effect of basalt fiber on metakaolin-based geopolymer mortars containing rilem, basalt and recycled waste concrete aggregates

Sahin F., Uysal M., Canpolat O., Aygörmez Y., Cosgun T., Dehghanpour H.
CONSTRUCTION AND BUILDING MATERIALS , vol.301, 2021 (SCI-Expanded) Creative Commons License Sustainable Development identifier identifier

The effect of polyvinyl fibers on metakaolin-based geopolymer mortars with different aggregate filling

Sahin F., Uysal M., Canpolat O., Cosgun T., Dehghanpour H.
CONSTRUCTION AND BUILDING MATERIALS , vol.300, 2021 (SCI-Expanded) Sustainable Development identifier identifier

Systematic evaluation of the aggregate types and properties on metakaolin based geopolymer composites

Sahin F., Uysal M., Canpolat O.
CONSTRUCTION AND BUILDING MATERIALS , vol.278, 2021 (SCI-Expanded) Creative Commons License identifier identifier

Bacterial crack healing in metakaolin based geopolymer mortars

Polat B., Uysal M.
JOURNAL OF BUILDING ENGINEERING , vol.39, no.102291, pp.1-16, 2021 (SCI-Expanded)

Combined effect of temperature and time on the flow properties of self-compacting concrete

Salhi M., Ghrici M., BİLİR T., Uysal M.
CONSTRUCTION AND BUILDING MATERIALS , vol.240, 2020 (SCI-Expanded) identifier identifier

Elevated temperature, freezing-thawing and wetting-drying effects on polypropylene fiber reinforced metakaolin based geopolymer composites

Aygörmez Y., Canpolat O., Al-Mashhadani M. M., Uysal M.
CONSTRUCTION AND BUILDING MATERIALS , vol.235, 2020 (SCI-Expanded) identifier identifier

Effect of curing methods and scrap tyre addition on properties of mortars

Bostanci L., Ustundag O., Sola O. C., Uysal M.
GRADEVINAR , vol.72, no.4, pp.311-322, 2020 (SCI-Expanded) Creative Commons License identifier identifier

Mechanical properties of class C and F fly ash geopolymer mortars

Kaya M., Uysal M., Yilmaz K., KARAHAN O., ATİŞ C. D.
GRADEVINAR , vol.72, no.4, pp.297-309, 2020 (SCI-Expanded) Creative Commons License identifier identifier

Influence of wetting-drying curing system on the performance of fiber reinforced metakaolin-based geopolymer composites

Arslan A. A., Uysal M., Yilmaz A. O., Al-Mashhadani M. M., Canpolat O., Sahin F., et al.
CONSTRUCTION AND BUILDING MATERIALS , vol.225, pp.909-926, 2019 (SCI-Expanded) identifier identifier

Effect of curing methods and silica aerogel addition on properties of mortars

Bostanci L., Ustundag O., Sola O. C., Uysal M.
GRADEVINAR , vol.71, no.8, pp.765-775, 2019 (SCI-Expanded) Creative Commons License identifier identifier

Modeling the weight and length changes of the concrete exposed to sulfate using artificial neural network

Akyun V., Uysal M., Tanyildizi H., Sumer M.
REVISTA DE LA CONSTRUCCION , vol.17, no.3, pp.337-353, 2018 (SCI-Expanded) identifier identifier

Optimization of durability properties of concrete containing fly ash using Taguchi's approach and Anova analysis

Uysal M., Akyuncu V., Tanyildizi H., Sumer M., Yıldırım H.
REVISTA DE LA CONSTRUCCION , vol.17, no.3, pp.364-382, 2018 (SCI-Expanded) Creative Commons License identifier identifier

High-temperature behavior and mechanical characteristics of boron waste additive metakaolin based geopolymer composites reinforced with synthetic fibers

Celik A., Yilmaz K., Canpolat O., Al-Mashhadani M. M., Aygörmez Y., Uysal M.
CONSTRUCTION AND BUILDING MATERIALS , vol.187, pp.1190-1203, 2018 (SCI-Expanded) identifier identifier

Effect of using colemanite waste and silica fume as partial replacement on the performance of metakaolin-based geopolymer mortars

Uysal M., Al-Mashhadani M. M., Aygörmez Y., Canpolat O.
CONSTRUCTION AND BUILDING MATERIALS , vol.176, pp.271-282, 2018 (SCI-Expanded) identifier identifier

Micro-mechanical analysis and X-ray computed tomography quantification of damage in concrete with industrial by-products and construction waste

Erdem S., Gurbuz E., Uysal M.
JOURNAL OF CLEANER PRODUCTION , vol.189, pp.933-940, 2018 (SCI-Expanded) identifier identifier

Mechanical and microstructural characterization of fiber reinforced fly ash based geopolymer composites

Al-Mashhadani M. M., Canpolat O., Aygörmez Y., Uysal M., Erdem S.
CONSTRUCTION AND BUILDING MATERIALS , vol.167, pp.505-513, 2018 (SCI-Expanded) identifier identifier

The Use of Waste Maroon Marble Powder and Iron Oxide Pigment in the Production of Coloured Self-Compacting Concrete

Uysal M.
ADVANCES IN CIVIL ENGINEERING , vol.2018, 2018 (SCI-Expanded) Creative Commons License identifier identifier

Behaviour of Geopolymer Mortars after Exposure to Elevated Temperatures

Kaya M., Uysal M., Yilmaz K., ATİŞ C. D.
MATERIALS SCIENCE-MEDZIAGOTYRA , vol.24, no.4, pp.428-436, 2018 (SCI-Expanded) Creative Commons License identifier identifier

Effect of pre-setting pressure applied flexure strength and fracture toughness of new SIFCON plus RPC composite during setting phase

Ipek M., Aksu M., Uysal M., Yilmaz K., Vural I.
CONSTRUCTION AND BUILDING MATERIALS , vol.79, pp.90-96, 2015 (SCI-Expanded) identifier identifier

The structural behaviour of composite beams with prefabricated reinforced concrete plate in positive moment zone

Yelgin A. N., Ozyurt M. Z., Uysal M.
CONSTRUCTION AND BUILDING MATERIALS , vol.68, pp.627-629, 2014 (SCI-Expanded) identifier identifier

The effect of pre-setting pressure on the flexural strength and fracture toughness of SIFCON during the setting phase

Ipek M., Aksu M., Yilmaz K., Uysal M.
CONSTRUCTION AND BUILDING MATERIALS , vol.66, pp.515-521, 2014 (SCI-Expanded) identifier identifier

The influence of coarse aggregate type on mechanical properties of fly ash additive self-compacting concrete

Uysal M.
CONSTRUCTION AND BUILDING MATERIALS , vol.37, pp.533-540, 2012 (SCI-Expanded) identifier identifier

Durability performance of concrete incorporating Class F and Class C fly ashes

Uysal M., Akyuncu V.
CONSTRUCTION AND BUILDING MATERIALS , vol.34, pp.170-178, 2012 (SCI-Expanded) identifier identifier

Taguchi and Anova approach for optimisation of design parameters on the compressive strength of HSC

Uysal M.
MAGAZINE OF CONCRETE RESEARCH , vol.64, no.8, pp.727-735, 2012 (SCI-Expanded) identifier identifier

Properties and behavior of self-compacting concrete produced with GBFS and FA additives subjected to high temperatures

Uysal M., Yilmaz K., Ipek M.
CONSTRUCTION AND BUILDING MATERIALS , vol.28, no.1, pp.321-326, 2012 (SCI-Expanded) identifier identifier

The effect of mineral admixtures on mechanical properties, chloride ion permeability and impermeability of self-compacting concrete

Uysal M., Yilmaz K., Ipek M.
CONSTRUCTION AND BUILDING MATERIALS , vol.27, no.1, pp.263-270, 2012 (SCI-Expanded) identifier identifier

Estimation of compressive strength of self compacting concrete containing polypropylene fiber and mineral additives exposed to high temperature using artificial neural network

Uysal M., Tanyildizi H.
CONSTRUCTION AND BUILDING MATERIALS , vol.27, no.1, pp.404-414, 2012 (SCI-Expanded) identifier identifier

The effect of pre-setting pressure applied flexural strength and fracture toughness of reactive powder concrete during the setting phase

Ipek M., Yilmaz K., Uysal M.
CONSTRUCTION AND BUILDING MATERIALS , vol.26, no.1, pp.459-465, 2012 (SCI-Expanded) identifier identifier

Self-compacting concrete incorporating filler additives: Performance at high temperatures

Uysal M.
CONSTRUCTION AND BUILDING MATERIALS , vol.26, no.1, pp.701-706, 2012 (SCI-Expanded) identifier identifier

Performance of self-compacting concrete containing different mineral admixtures

Uysal M., Sumer M.
CONSTRUCTION AND BUILDING MATERIALS , vol.25, no.11, pp.4112-4120, 2011 (SCI-Expanded) identifier identifier

Predicting the core compressive strength of self-compacting concrete (SCC) mixtures with mineral additives using artificial neural network

Uysal M., Tanyildizi H.
CONSTRUCTION AND BUILDING MATERIALS , vol.25, no.11, pp.4105-4111, 2011 (SCI-Expanded) identifier identifier

Effect of mineral admixtures on properties of self-compacting concrete

Uysal M., Yilmaz K.
CEMENT & CONCRETE COMPOSITES , vol.33, no.7, pp.771-776, 2011 (SCI-Expanded) identifier identifier
Articles Published in Other Journals

Assessing Durability in Geopolymer Composites with Brick Powder and Recycled Concrete Aggregate

Aygun B. F., Akturk B., Uysal M., Boutkhil H.
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , vol.43, no.4, pp.1-14, 2025 (ESCI)

INVESTIGATION OF USING CAVE BACTERIA IN THE PRODUCTION OF SELF-HEALING MORTARS

Deliktaş E. B., Uysal M., Doğruöz Güngör N.
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , vol.42, no.6, pp.1712-1728, 2024 (ESCI)

Accelerated microwave curing of hybrid geopolymers with nano-silica for enhanced physico-mechanical properties

Balapanov B., Montayev ., Uysal M., Aygun B.
Journal of sustainable construction materials and technologies (Online) , vol.9, pp.1-9, 2024 (Peer-Reviewed Journal)

Mechanical Performance Enhancement of AlkaliActivated Composites Using Synthetic Fibers with Metazeolite and Aluminum Sludge-Based Recycled Concrete Aggregates

Aygun B. F., Uysal M., Cingi R.
INTERNATIONAL JOURNAL of ENGINEERING TECHNOLOGIES-IJET , vol.9, no.2, pp.63-72, 2024 (Peer-Reviewed Journal)

Synergistic effects of natural pozzolan as cementitious materials and aggregate on self-compacting mortar properties

Ouldkhaoua Y., Herihiri O., El Ghazali B. M., Benabed B., Uysal M.
Studies in Engineering and Exact Sciences , vol.5, no.2, pp.1-25, 2024 (Peer-Reviewed Journal)

Coal bottom ash and its applications in cement and concrete technologies: a review

Aygun B. F., Bilir T., Uysal M.
Discover Civil Engineering , vol.1, no.1, pp.1-63, 2024 (Peer-Reviewed Journal) Sustainable Development

Alkali-activated composites with synthetic fibers and recycled aggregates: a study of mechanical properties

Cingi R., Balapanov B., Uysal M., Aygun B. F., Canpolat O., Montayev S.
Technobius , vol.4, no.2, pp.1-15, 2024 (Peer-Reviewed Journal)

Investigation of the Physical and Mechanical Properties of Metabentonite and Slag-based Geopolymer Mortars

Şahin F., Aladağ C., Uysal M.
Journal of Civil Engineering and Urbanism , vol.13, no.2, pp.33-41, 2023 (Peer-Reviewed Journal)

Influence of rice husk ash substitution on some physical, mechanical and durability properties of the metakaolin-based geopolymer mortar

Uysal M., Kabirova A.
International Journal of Sustainable Construction Engineering and Technology , vol.7, no.2, pp.88-94, 2022 (Scopus)

Geopolimer Beton ve Geleneksel Beton Üretim Süreçlerinden Kaynaklı CO2 Salınımının Metasezgisel Yöntemlerle Belirlenmesi

Çakmak A., Uysal M.
Türk Doğa ve Fen Dergisi , vol.10, no.1, pp.1-12, 2021 (Peer-Reviewed Journal)

A RESEARCH FOR BACTERIAL SELF-HEALING IN METAKAOLIN BASED GEOPOLYMER MORTARS

Polat B. Y., Uysal M., Korkmaz V.
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , vol.38, no.3, pp.1401-1414, 2020 (ESCI) Sustainable Development identifier

Abrasion Resistance and Strength Properties of Non-Fibrous and Steel Fiber Reinforced Mortars With Different Aggregates

Almashhadani M. M., Canpolat O., Karagöz M., Aygörmez Y., Uysal M.
Journal of Sustainable Construction Materials and Technologies , vol.3, no.2, pp.221-229, 2018 (Peer-Reviewed Journal) Creative Commons License

Effect of Using Colemanite and Basalt Fiber on the Mechanical Properties of Metakaolin-Based Geopolymer Mortars

Nawar A., Canpolat O., Almashhadani M. M., Aygörmez Y., Uysal M.
Journal of Sustainable Construction Materials and Technologies , vol.3, no.2, pp.235-241, 2018 (Peer-Reviewed Journal) Creative Commons License

Investigation of Waste Products of Boron and Metakaolin Utilizes

Mushurov M., Canpolat O., Uysal M., Almashhadani M. M., Aygörmez Y.
Journal of Sustainable Construction Materials and Technologies , vol.3, no.2, pp.212-220, 2018 (Peer-Reviewed Journal) Creative Commons License

Jeopolimer harçlarda dayanım, kür sıcaklığı ve boşluk oranı ilişkisinin varyans analizi ile incelenmesi

KAYA M., UYSAL M., YILMAZ K.
Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi , 2018 (Peer-Reviewed Journal)

Farklı Kompozisyonlardaki Zararlı Ortamlara Maruz Kalan Betonlar İçin Uygun Çimento Tipinin Belirlenmesi.

Uysal M., Yılmaz K.
Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, , vol.16, no.2, pp.76-82, 2012 (Peer-Reviewed Journal)

Aşırı Dozda Akışkanlaştırıcı Katkı Kullanımının Beton Özelliklerine Etkisi.

Uysal M., Yılmaz K.
Osmangazi Üniversitesi Mühendislik-Mimarlık Dergisi, , vol.25, no.1, pp.19-35, 2012 (Peer-Reviewed Journal) Sustainable Development

Gazbetonun Kuruma Rötresine Bağlayıcı Malzeme Miktarı Değişiminin Etkisi.

Uysal M., Sümer M.
Erciyes Üniversitesi Fen Bilimleri Enstitüsü Dergisi, , vol.28, no.4, pp.303-308, 2012 (Peer-Reviewed Journal)

Şavşat Trasının Beton Üretiminde Kullanılabilirliğinin İncelenmesi.

Uysal M., Yılmaz K.
e- Journal of New World Sciences Academy, , vol.6, no.4, pp.1467-1480, 2011 (Peer-Reviewed Journal)

Farklı Dozlarda Üretilen Beyaz Betonların Basınç Dayanımına Farklı Kür Şartlarının Etkisi.

Uysal M., Yılmaz K.
Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, , vol.15, no.2, pp.139-145, 2011 (Peer-Reviewed Journal)

Betonda Mineral Katkı Olarak Kullanılan Alunitin Betonun Mekanik Özelliklerine ve Sülfat Direncine Etkisi.

Uysal M., Yılmaz K.
e- Journal of New World Sciences Academy, , vol.6, no.4, pp.1440-1447, 2011 (Peer-Reviewed Journal)
Refereed Congress / Symposium Publications in Proceedings

Investigation of electric curing effect of potassium activated fly ash and slag based geopolymer mortars

Yılmaz M., Uysal M.
Fib Symposium 2025, Antibes, France, 16 - 18 June 2025, pp.1-8

Investigation of Mechanical Properties of Ceramic Waste Powder Based Low Molarity Geopolymer Composites

Keskin A., Uysal M., Avşar Y. E.
Fib Symposium 2025, Antibes, France, 16 - 18 June 2025, pp.1-8

Redefining Geopolymer Innovation: Electrical Curing of Ceramic and Chromium-Enriched Mortars for Mechanical Properties

Aygun B. F., Uysal M.
Fib Symposium 2025, Antibes, France, 16 - 18 June 2025, pp.1-8

Role of Nano-SiO2 in Enhancing Properties of Slag-Waste Ceramic Powder-Based Geopolymer Composites

Aygun B., Uysal M.
4th International Civil Engineering & Architecture Conference, Trabzon, Turkey, 17 - 19 May 2025, pp.1-8

Advancing Geopolymer Mortars with Recycled Concrete Aggregates Through Joule Heating Curing

Ekmekci S., Uysal M., Aygun B.
4th International Civil Engineering & Architecture Conference, Trabzon, Turkey, 17 - 19 May 2025, pp.1-8

The effect of ohmic heating on alkaliactivated blast furnace slag-fly ash concrete with marble powder replacement

Yılmaz M., Uysal M.
4th International Civil Engineering & Architecture Conference, Trabzon, Turkey, 17 - 19 May 2025, pp.1-8

A New Era for Lime with Natural Hydraulic Lime Binder and Innovative Aggregates of Hemp Stalks, Sunflower Husks

Capraz D., Uysal M., Aygun B., Sahin F.
4th International Civil Engineering & Architecture Conference, Trabzon, Turkey, 17 - 19 May 2025, pp.1-8

Ohmic Heating as a Novel Curing Method for Enhancing the Properties of Geopolymer Mortars Containing Waste Marble Powder

Sezer E., Ekmekci S., Uysal M., Sahin F., Aygun B.
4th International Civil Engineering & Architecture Conference, Trabzon, Turkey, 17 - 19 May 2025, pp.1-8

Evaluation of Kocaeli Gulf Marine Solid Wastes in Geopolymer Composite Production

Tastemur O., Uysal M.
4th International Civil Engineering & Architecture Conference, Trabzon, Turkey, 17 - 19 May 2025, pp.1-8

Effect of Nano-TiO2 on Physical Properties of Slag-Ceramic Powder-Based Geopolymer Composites

Aygun B., Uysal M.
4th International Civil Engineering & Architecture Conference, Trabzon, Turkey, 17 - 19 May 2025, pp.1-8

Improvement of 3D Printing Properties of MgO Derived Binders by CO2 Curing in Hardened State

Avşar Y. E., Uysal M., Akca A. H.
4th International Civil Engineering & Architecture Conference, Trabzon, Turkey, 17 - 19 May 2025, pp.1-8

Electrical curing of geopolymer composites including fly ash and slag

Uysal M.
International Seminar on Materials and Engineering Structures (ISMES’2024, Relizane, Algeria, 26 - 27 October 2024, pp.1-18

Analysis of the Properties of Electrically Cured Fly Ash-Slag Geopolymer Composites Containing Different Ac-tivators

Aygun B. F., Bilir T., Çoşgun T., Uysal M., Deliktaş E. B.
15th fib International PhD Symposium in Civil Engineering, Budapest, Hungary, 28 - 30 August 2024, pp.1-8

Low Molarity Geopolymer Composites: Can Alternative Electrical Curring Influence and Enhance Key Harde-ning Properties?

Kotancı İ., Uysal M., Bilir T., Çoşgun T., Aygun B. F.
15th fib International PhD Symposium in Civil Engineering, Budapest, Hungary, 28 - 30 August 2024, pp.1-8

Effect of Nano-SiO2 on Electrical Cured Metakaolin-Granulated Blast Furnace Slag Based Geopolymers with Fiber Addition

Gökçegöz Y., Uysal M., Aygun B. F.
15th fib International PhD Symposium in Civil Engineering, Budapest, Hungary, 28 - 30 August 2024, pp.1-8

Investigation of Self-Healing Potential of Ceramic Waste-Based Geopolymer Composites with Marine Bacteria

Köseoğlu S., Uysal M., Canpolat O., Arslan Aydoğdu E. Ö.
4th International Graduate Studies Congress, Balıkesir, Turkey, 5 - 08 June 2024, pp.1-2 Sustainable Development

Study on the Self-Healing Properties of Geopolymer Mortars Incorporating Various Marine Bacteria

Kubat M., Canpolat O., Uysal M., Arslan Aydoğdu E. Ö.
4th International Graduate Studies Congress, Balıkesir, Turkey, 5 - 08 June 2024, pp.1-2

Prediction of the Long-Term Compressive Strength and Ultrasonic Pulse Velocity of Self-Compacting Concrete Containing Mineral Admixtures Using Artificial Neural Networks

Uysal M., Tanyıldızı H., Bendjilali F., Ghrici M.
International Conference on Engineering, Social- Sciences, and Humanities (ICESSH-2024), Makkah, Saudi Arabia, 8 - 09 February 2024, pp.1-10

Farklı Lifler İçeren Uçucu Kül-Cüruf Esaslı Geopolimer Kompozitlerde Farklı Kür Yönteminin Etkisiyle Mekanik Özelliklerin İncelenmesi

Aygun B. F., Uysal M., Bilir T.
BETON 2023 Hazır Beton Kongresi, İstanbul, Turkey, 8 - 10 November 2023, pp.1-11

Determination of Radiation Absorption Properties of Some Concretes Containing Heavy Aggregate and Ulexite

Ateş E. Y., Yalım H. A., Uysal M.
10th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2023), Antalya, Turkey, 27 - 30 October 2023, pp.1-8

Mechanical Properties of Different Fibers in Brick Powder Added Geopolymer Composites inclusing Concrete powder

Akturk B., Uysal M., Bilir T., Aygun B.
3rd International Civil Engineering and Architecture Conference (ICEARC'23), Trabzon, Turkey, 12 - 14 October 2023, pp.1-9

Investigation of Ceramic Powder-Based Geopolymer Mortars Containing Different Activators

Mumcuoglu A. M., Koseoglu A. E., Mıchıyazgan C., Avşar İ., Aygun B. F., Kılıç A. T., et al.
3rd International Civil Engineering and Architecture Conference (ICEARC'23), Trabzon, Turkey, 12 - 14 October 2023, pp.1-8

Use of Industrial Waste Powders as Partial Replacement of Recycled Concrete Aggregate in Red Mud-Metakaolin Based Geopolymer Mortars

NAZIR K., CANPOLAT O., UYSAL M., Kuranlı Ö. F.
1st International Conference on Scientific and Academic Research (ICSAR 2022), Konya, Turkey, 10 December 2022, pp.749-755

Different mixing methods for red mud-metakaolin based geopolymer mortars with recycled materials

Uysal M., Canpolat O., Çoşgun T., Aygörmez Y., Kuranlı Ö. F.
4th International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Turkey, 28 - 30 September 2022, pp.1-9

Mechanical effect of electrical curing for metakaolin and slag based geopolymer mortars with different molarities

Gökçegöz Y., Uysal M., Arıkan O., Salhi M.
4th International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Turkey, 28 - 30 September 2022, pp.837-843

Geopolimer Teknolojisinin Tarihsel gelişimi, Geopolimerlerin Özellikleri ve Kullanım alanları

Kabirova A., Uysal M.
UDEF 7. Uluslararası Öğrenci Sempozyumu, Kahramanmaraş, Turkey, 23 - 25 September 2022, pp.1-7

Bazalt Tozunun Geopolimer Üretiminde Kullanılabilirliğinin Araştırılması

Kabirova A., Uysal M.
UDEF 7. Uluslararası Öğrenci Sempozyumu, Samsun, Turkey, 1 - 03 October 2021, pp.1-9

Influence of Different Biogenic Curing Media in Self-Healing Alkali- Based Mortars

Polat B., Uysal M., Korkmaz V.
II. International Conference on Innovative Engineering Applications (CIEA' 2021), Muş, Turkey, 20 - 21 May 2021, pp.1-9

Mermer Atığının Geopolimer ÜretimindeKullanılabilirliğinin Araştırılması

Kabirova A., UYSAL M., CANPOLAT O.
6th International Student Sypozyum, Sakarya, Turkey, 5 - 06 December 2020, pp.29

Bentonitin Geopolimer Üretiminde Kullanilabilirliğinin Araştırılması

Kabirova A., Uysal M., Canpolat O., Şahin F., Aygörmez Y., Al-Mashhadanı M. O. M.
5. Uluslararası Öğrenci Sempozyumu, İstanbul, Turkey, 6 - 08 December 2019, pp.54-65 Creative Commons License

Uçucu Kül ve Öğütülmüş Yüksek Fırın Cürufunun Beton Yol Karışımlarının Basınç Dayanımı ve Durabilitesine Olan Etkilerinin Araştırılması

Acikok F., Canpolat O., Uysal M., Aygörmez Y.
1. Beton Yollar Kongresi ve Sergisi, Ankara, Turkey, 13 - 14 November 2019, pp.275-285

Fly Ash Based Geopolymer Composites Partially Replaced With Silica Fume: An Experimental İnvestigation

Al-Mashhadanı M. O. M., Canpolat O., Aygörmez Y., Uysal M., Şahin F.
Fifth International Conference on Sustainable Construction Materials andTechnologies, London, England, 14 - 17 July 2019, pp.74-82 Creative Commons License Sustainable Development identifier

Experimental Investigation of Engineering Properties of Metakaolin Based Geopolymer Mortars with Different Filling Materials

Kabirova A., Uysal M., Canpolat O., Şahin F., Aygörmez Y., Almashadani M.
4th Eurasian Conference on Civil and Environmental Engineering (ECOCEE), İstanbul, Turkey, 17 - 18 June 2019, pp.918-929

Mechanical and Durability Properties of Fly Ash Based Geopolymers Mortars with Different Filling Materials

Tammam Y., Chakkor V., Uysal M., Canpolat O., Aygörmez Y., Almashadani M.
4th Eurasian Conference on Civil and Environmental Engineering (ECOCEE), İstanbul, Turkey, 17 - 18 June 2019, pp.866-874

Sulfate resistance of sustainable geopolymer mortars

AYGÖRMEZ Y., CANPOLAT O., Al-Mashhadani M. M., Uysal M., Şahin F.
5th International Conference on Sustainable Construction Materials and Technologies, SCMT 2019, Kingston upon Hull, England, 14 - 17 July 2019, vol.2 Sustainable Development identifier

Using different types of aggregates including waste concrete in the production of geopolymer mortars

Canpolat O., Şahin F., Uysal M., Al-Mashhadanı M. O. M., Aygörmez Y.
5th International Conference on Sustainable Construction Materials and Technologies, SCMT 2019, Kingston upon Hull, United Kingdom, 14 - 17 July 2019, vol.2 Creative Commons License Sustainable Development identifier

Compressive and flexural strength behaviors of metakaolin based geopolymer mortars manufactured by different procedures

Aygörmez Y., Canpolat O., Al-Mashhadani M., Uysal M.
4th International Conference on Green Design and Manufacture 2018, IConGDM 2018, Ho Chi Minh, Vietnam, 29 - 30 April 2018, vol.2030 Creative Commons License Sustainable Development identifier identifier

Experimental notes on the factors affecting the strength behavior of fly ash based geopolymer composites

Canpolat O., Aygörmez Y., Al-Mashhadani M. M., Uysal M.
4th International Conference on Green Design and Manufacture 2018, IConGDM 2018, Ho Chi Minh, Vietnam, 29 - 30 April 2018, vol.2030 Creative Commons License Sustainable Development identifier identifier

Investigation of The Mechanical Characteristics of Geopolymer Mortars,

Kaya M., Uysal M., Yılmaz K.
3. International Conference on Civil and Environmental Engineering (ICOCEE),, İzmir, Turkey, 3 - 04 July 2018, pp.115-116

Modeling the weight and length changes of the concrete exposed to sulfate using artificial neural network

UYSAL M., SAYIN B., AKYÜNCÜ V., TANYILDIZI H., SÜMER M.
4th International Conference on Engineering and Natural Sciences, KİEV, Ukraine, 2 June - 06 May 2018

Vişne Çürüğü Mermer Tozu Kullanımının Aşınma ve Geçirimlilik Özelliklerine Etkisi

UYSAL M., POLAT B.
IV. International Multidisciplinary Congress of Eurasia, Roma, Italy, 23 - 25 August 2017 Sustainable Development

Vişne Çürüğü Mermer Tozu Kullanılarak Üretilen Renkli Betonların Mekanik Özelliklerinin İncelenmesi

UYSAL M., POLAT B.
IV. International Multidisciplinary Congress of Eurasia, Roma, Italy, 23 - 25 August 2017, pp.371-376

Jeopolimer Harçların Farklı Sülfatlar Etkisi Altında Performansları

UYSAL M., KAYA M., YILMAZ K.
IV. Imcofe International Multidisciplinary Congress of Euroasia, 23 - 25 August 2017, pp.167-176

F Tipi Uçucu Kül Kullanılarak Üretilen Alkali Aktive Edilmiş Harçların Yüksek Sıcaklık Dirençleri

UYSAL M., KAYA M., YILMAZ K.
International Science and Technology Conference (ISTEC), VİYANA, Austria, 13 - 15 July 2016, pp.402-407

Çimento Esaslı Tamir Harçlarının Fiziksel ve Mekanik Özelliklerini Maliyet Açısından İncelenmesi

UYSAL M., Yasin Ramazan S.
International Science and Technology Conference (ISTEC), VİYANA, Austria, 13 - 15 July 2016, pp.314-318

Prediction of Pull Out Performance of Chemical Anchors Embedded into Concrete

TOPÇU İ. B., GÜLER M., UYSAL M., TANYILDIZI H.
2nd International Conference on Engineering and Natural Science (ICENS 2016), SARAYBOSNA, Bosnia And Herzegovina, 24 - 28 May 2016, pp.440-457

Sıkıştırma İşleminin Betonarme Elemanların Sertleşmiş Betonun Dayanım Özelliklerine Etkisi

Uysal M., Yılmaz K., Ulugöl H.
2nd International Symposium on Innovative Technologies in Engineering and Science (ISITES 2014), , Karabük, Turkey, 9 - 10 April 2014, pp.979-988

Betonarme Eleman Tipinin Sertleşmiş Betonun Dayanım Özelliklerine Etkisi,

Uysal M., Yılmaz K., Ulugöl H.
2nd International Symposium on Innovative Technologies in Engineering and Science (ISITES 2014), , Karabük, Turkey, 9 - 11 April 2014, pp.989-998

An Investigation on the Reactive Powder Concrete Properties Containing Boron Waste

İpek M., Uysal M., Ulugöl H., Yılmaz K.
11th International Congress on Advances in Civil Engineering (ACE), İstanbul, Turkey, 13 - 14 March 2014, pp.567-575

Some properties of Fly Ash Additive Self-Compacting Concrete along Structural Element

Uysal M., Ulugöl H.
International Civil Engineering & Architecture Symposium for Academicians, Antalya, Turkey, 11 - 13 February 2014, pp.56-63

Metakaolinin Harçlarda Alkali Silis Reaksiyonuna Etkisinin Araştırılması

Yıldırım K., Sümer M., Uysal M.
75. Yılında İnşaat Mühendisliğinde 100. Yıl Teknik Kongresi, İstanbul, Turkey, 22 - 24 October 2012, pp.1-9

The Investigation of Chloride Ion Permeability of the Mortars Exposed to Alkali-Silica Reaction

Yıldırım K., Sümer M., Uysal M.
10th International Congress on Advances in Civil Engineering (ACE),, Ankara, Turkey, 16 - 18 October 2012, pp.1-8

The Investigation of the Variation of Compressive Strength, Unit Weight and Water Absorption of Self-Compacting Concrete along Structural Element

Uysal M., Yılmaz K.
10th International Congress on Advances in Civil Engineering (ACE), , Ankara, Turkey, 4 - 06 September 2012, pp.1-8

The Examination of the Variation of Compressive Strength, Water Absorption and Unit Weight of Marble Powder Additive Self-Compacting Concrete along Structural Element.

Uysal M., Yılmaz K.
2nd Annual International Conference on Construction, Athens, Greece, 18 - 21 June 2012, pp.23-31

Improving the Mechanical Properties of Reactive Powder Concrete.

İpek M., Uysal M., Yılmaz K.
I. International Workshop on Earthquake and Sustainable Materials (IWESM), Sakarya, Turkey, 13 June 2012, pp.84-92

Safranbolu Evlerinde Kullanılan Kerpiç Malzemenin Granüle Yüksek Fırın Cürufu İle İyileştirilmesi

Uysal M., Gürfidan A., Yılmaz K., Yıldırım K.
Uluslararası Endüstriyel Hammaddeler Sempozyumu, İstanbul, Turkey, 12 - 15 May 2015, pp.521-530

Aşırı Dozda Akışkanlaştırıcı Katkı Kullanımının Beton Özelliklerine Etkisinin Yapay Sinir Ağı Uygulaması

Uysal M., Ulugöl H.
International Science and Technology Conference,, Dubai, United Arab Emirates, 15 - 17 February 2012, pp.187-193 Sustainable Development

Farklı Çimentolar ile Üretilen Betonların Değişik Kür Koşulları Altında Basınç Dayanım Özelliklerinin İncelenmesi

Uysal M., Yılmaz K., Sümer M., Gundogdu A. İ.
International Science and Technology Conference, Dubai, United Arab Emirates, 14 - 16 February 2012, pp.1425-1433

The Investigation of Abrasion Resistance and Mechanical Properties of Self Compacting Concrete Containing Polypropylene Fibers

Uysal M.
7th Asian Symposium on Polymers in Concrete (ASPIC 2012), İstanbul, Turkey, 3 - 05 October 2012, pp.919-929 identifier

Silis Dumanı ve Filler Malzemenin Beton Özelliklerine ve Klorür Geçirimliliğine Etkisinin İncelenmesi

Uysal M., Yıldırım K.
International Science and Technology Conference, İstanbul, Turkey, 7 - 09 November 2011, pp.715-721

Uçucu Külün Betonda Alkali Silika Reaksiyonuna Etkisinin Araştırılması

Yıldırım K., Sümer M., Uysal M.
8. Ulusal Beton Kongresi, İzmir, Turkey, 12 - 15 October 2011, pp.99-108

Kendiliğinden Yerleşen Beton Kullanılarak Üretilen Yoğun Donatılı Perde Elemanlarında Basınç Dayanımının Döküm Noktasına Göre Değişimi

Uysal M., Yılmaz K., Sümer M.
8. Ulusal Beton Kongresi, İzmir, Turkey, 4 - 07 October 2011, pp.561-570

Granüle Yüksek Fırın Cürufunun Beton Özelliklerine ve Klorür Geçirimliliğine Etkisinin İncelenmesi

Uysal M., Yıldırım K., Sümer M.
International Science and Technology Conference, İstanbul, Turkey, 22 - 24 September 2011, pp.422-427

Mineral Katkılı Betonların Donma-Çözülme Etkisi Altındaki Davranışının İncelenmesi

Uysal M.
Beton 2011 Hazır Beton Kongresi, İstanbul, Turkey, 1 - 03 June 2011, pp.290-300

Mineral Katkı Kullanımının Kendiliğinden Yerleşen Betonun Elastisite Modülüne Etkisinin İncelenmesi

Uysal M., Yılmaz K.
6th International Advanced Technologies Symposium (IATS’11), Elazığ, Turkey, 18 - 21 November 2011, pp.59-63

Alkali Silis Reaksiyonunda Yüksek Fırın Cürufu Etkisinin Araştırılması

Yıldırım K., Sümer M., Uysal M.
International Science and Technology Conference, İstanbul, Turkey, 12 - 14 April 2011, pp.31-35

Investigation of Durability Properties of Self Compacting Concrete with Marble Powder

Uysal M., Yılmaz K.
9th International Congress on Advances in Civil Engineering (ACE), Trabzon, Turkey, 10 - 12 June 2010, pp.1-10

Farklı Filler Malzemeler İçeren Kendiliğinden Yerleşen Betonların İşlenebilirlik Özelliklerinin İncelenmesi

Uysal M., Sümer M.
International Science and Technology Conference, Gazimagusa, Cyprus (Kktc), 17 - 20 May 2010, pp.523-531

The Effect of Marble Powder on the Workability and Mechanical Properties of Self Compacting Concrete

Uysal M.
II. Uluslararası Mermer ve Doğaltaşlar Kongresi, İzmir, Turkey, 19 - 21 April 2010, pp.316-324

17 Ağustos Marmara Depreminde Hasar Görmüş Yapıların Beton Kalitesinin İncelenmesi ve Depremden Günümüze Ülkemizde ve Sakarya’da Beton Kalitesinin Değişimi

Uysal M., Sümer M.
Uluslararası Sakarya Deprem Sempozyumu, Sakarya, Turkey, 19 - 21 May 2009, pp.762-771

Sık Donatılı Yapı Elemanlarında İdeal Bir Çözüm Olarak Kendiliğinden Yerleşen Betonlar ve Örnek Bir Uygulama

Uysal M., Yılmaz K.
Uluslararası Sakarya Deprem Sempozyumu, Sakarya, Turkey, 12 - 15 May 2009, pp.803-819

Yüksek Fırın Cürufunun Kendiliğinden Yerleşen Betonlara Etkileri

Sümer M., Sönmez T., Uysal M.
Çukurova Üniversitesi MMF, 30. Yıl Sempozyumu, Adana, Turkey, 21 - 24 October 2008, pp.374-378

The Investigation of Adherence Sufficiency in Reinforcing Steel by Coating Epoxy.

Uysal M., Sümer M., Yıldırım K.
8th International Congress on Advances in Civil Engineering (ACE), Gazimagusa, Cyprus (Kktc), 24 - 27 March 2008, pp.251-261

Depremde Hasar Görmüş Yapıların Fiber Takviyeli Polimerlerle Onarılması

Sümer M., Uysal M.
Onarım ve Güçlendirme Sempozyumu, Denizli, Turkey, 16 - 18 May 2006, pp.60-63

Farklı tür Akışkanlaştırıcı Katkıların Yüksek Dayanımlı Betonlar Üzerine Etkileri

Yılmaz K., Sümer M., Uysal M.
6. Ulusal Beton Kongresi, İstanbul, Turkey, 9 - 11 November 2005, pp.209-218

Zeolit Katkılı Çimentoların Özelliklerinin İncelenmesi

Canpolat F., Yılmaz K., Sümer M., Uysal M.
6. Ulusal Beton Kongresi, İstanbul, Turkey, 18 - 20 October 2005, pp.63-72
Books

GEOPOLYMER BRICKS/Production of Geopolymer Bricks

Aygun B. F., Uysal M., Bilir T.
Elsevier Science, Oxford/Amsterdam , Amsterdam, 2025

Treatment and Utilization of Combustion and Incineration Residues/Recycling of various types of slags as SCMs and aggregates

Kuranli Ö. F., Bayram M., Niş A., Uysal M., Ozbakkaloglu T.
Elsevier Science, Oxford/Amsterdam , Amsterdam, 2024

Mechanical performance of synthetic fiber-reinforced alkali-activated composites

Aygun B. F., Uysal M.
in: Advanced Fiber-Reinforced Alkali-Activated Composites-Design, Mechanical Properties and Durability, Abdulkadir Cevik,Anil Nis, Editor, Elsevier Science, Oxford/Amsterdam , Massachusetts, pp.319-341, 2023

Durability of hybrid fiber-reinforced alkali-activated composites

Aygün B. F., Uysal M., Bilir T.
in: Advanced Fiber-Reinforced Alkali-Activated Composites-Design, Mechanical Properties and Durability, Abdulkadir Cevik,Anil Nis, Editor, Elsevier Science, Oxford/Amsterdam , Massachusetts, pp.473-495, 2023
Metrics

Publication

164

Citation (WoS)

2559

H-Index (WoS)

24

Citation (Scopus)

2935

H-Index (Scopus)

25

Citation (Scholar)

3985

H-Index (Scholar)

28

Project

24

Intellectual Property

1

Thesis Advisory

18

Open Access

55
UN Sustainable Development Goals