Assoc. Prof. Yahya BAYRAK

Publication Network

Articles 19

1. Unveiling the role of HfO2 ratio on characteristics of aluminium-HfO2 composites fabricated by hot-pressing

Cingöz U. C., ÖZBAY KISASÖZ B., BAYRAK Y., KISASÖZ A.

Materials Letters , vol.421, 2026 (SCI-Expanded, Scopus)

2. Coupled role of in-situ reactions and post-production pressing on the characteristics of hot-pressed aluminium-Y2O3-Al2O3 composites

Cingöz U. C., Sönmez B., ÖZBAY KISASÖZ B., BAYRAK Y., KISASÖZ A.

Ceramics International , vol.52, no.15, pp.29556-29567, 2026 (SCI-Expanded, Scopus)

3. Hot-Pressing Process of 7075 Aluminum Alloy: Microstructure, Corrosion and Wear Properties

Cingöz U. C., CÖMERT Z. Y., ÖZBAY KISASÖZ B., BAYRAK Y., SEZER R., KISASÖZ A.

Journal of Materials Engineering and Performance , vol.35, no.20, pp.20448-20461, 2026 (SCI-Expanded, Scopus)

4. Production and characterization of AlCuMgMnZn high entropy alloy prepared by hot pressing

SEZER R., Erol M., BAYRAK Y., KISASÖZ A.

Materials Chemistry and Physics , vol.351, 2026 (SCI-Expanded, Scopus)

5. Tailoring the corrosion behavior of hot-pressed aluminium-CeO2 composites

ÖZBAY KISASÖZ B., Erol M., BAYRAK Y., KISASÖZ A.

Materials Letters , vol.404, 2026 (SCI-Expanded, Scopus)

6. Sıcak presleme yöntemiyle üretilen alüminyum matrisli B4C takviyeli kompozitlerin özelliklerine sıcak presleme sıcaklığının ve takviye oranının etkisi

Bayrak Y.

Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , vol.15, pp.1-7, 2026 (TRDizin)

7. Revealing the Influence of Hafnium on the Microstructure, Corrosion, and Wear Properties of Fe–10Cr Alloy

Erol M., Tarakçı G., ÖZBAY KISASÖZ B., BAYRAK Y., KISASÖZ A.

Arabian Journal for Science and Engineering , 2026 (SCI-Expanded, Scopus)

8. AJEAS 2025, 3(3): 154-174. http://dx.doi.org/10.70988/ajeas.1835402 154 Copyright: © 2025 by the authors. Licensee ÇAKÜ, Çankırı, Türkiye. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/) Alüminyum, Ferrosilisyum ve Kalsiyum Karbür ile Magnezyum Oksit ve Dolomitin Redüksiyonunda Magnezyum Üretiminin İncelenmesi

Bayrak Y., Ekerim A.

Alfa Mühendislik ve Uygulamalı Bilimler Dergisi , vol.3, no.3, pp.154-174, 2025 (Peer-Reviewed Journal)

9. Unveiling the influence of CeO₂ rare-earth oxide content on in-situ phase formation and properties of aluminium matrix composites

Erol M., BAYRAK Y., ÖZBAY KISASÖZ B., Yılmaz M. A., Özkan D., KISASÖZ A.

CERAMICS INTERNATIONAL , vol.51, no.28, pp.57819-57831, 2025 (SCI-Expanded, Scopus)

10. Synergetic effect of Y2O3 rare-earth oxide and in-situ phases on corrosion and wear properties of AlSi10Mg aluminium matrix composites produced by hot pressing

Cingöz U. C., Özbay Kısasöz B., BAYRAK Y., KISASÖZ A.

Ceramics International , vol.51, no.24, pp.43111-43124, 2025 (SCI-Expanded, Scopus)

11. Production and Characterization of B4C Content-Dependent Aluminum Matrix Composites Fabricated via Hot Pressing

BAYRAK Y., KISASÖZ A., SEZER R.

Journal of Materials Engineering and Performance , vol.34, no.2, pp.1607-1618, 2025 (SCI-Expanded, Scopus)

12. Influence of SiC content on the properties of Al/SiC composites produced by powder metallurgical route

BAYRAK Y.

Materialpruefung/Materials Testing , vol.66, no.12, pp.2011-2017, 2024 (SCI-Expanded, Scopus)

13. Characterization of Al/B4C–Y2O3 hybrid composites produced by vacuum hot pressing combined with Al2O3–Y2O3 interaction

BAYRAK Y., Özbay Kısasöz B., Tarakçı G., KISASÖZ A.

Ceramics International , vol.50, no.19, pp.36230-36242, 2024 (SCI-Expanded, Scopus)

14. Properties of Al/Y2O3 composites produced by Y2O3-Al2O3 interaction in powder metallurgy route

BAYRAK Y., KISASÖZ A., SEZER R.

Materials Letters , vol.358, 2024 (SCI-Expanded, Scopus)

15. Removal of Cu(II) Ions from Aqueous Solutions by Ferrochrome Ash: Investigation of Mechanism and Kinetics

Uğurlu E., Birol B., Gencten M., Bayrak Y.

Water (Switzerland) , vol.15, no.6, 2023 (SCI-Expanded, Scopus)

16. The Effect of Holding Time After Sr Addition on Microstructural and Mechanical Properties of A356 Alloy

YAŞA S., KABİL A., BAYRAK Y., ÇİĞDEM M.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.26, no.4, pp.634-637, 2020 (ESCI, TRDizin)

17. EFFECT OF ETCHING METHODS IN METALLOGRAPHIC STUDIES OF DUPLEX STAINLESS STEEL 2205

KISASÖZ A., KARAASLAN A., BAYRAK Y.

METAL SCIENCE AND HEAT TREATMENT , vol.58, pp.704-706, 2017 (SCI-Expanded, Scopus)

18. Kinetic properties of co-reduced Co-B/graphene catalyst powder for hydrogen generation of sodium borohydride

Aydin M., Hasimoglu A., BAYRAK Y., Ozdemir O. K.

JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY , vol.7, no.1, 2015 (SCI-Expanded, Scopus)

19. Effect of Section Thickness on the Microstructure and Hardness of Ductile Cast Iron

Guzel E., Yuksel C., BAYRAK Y., Sen O., Ekerim A.

MATERIALS TESTING , vol.56, no.4, pp.285-288, 2014 (SCI-Expanded, Scopus)

Papers Presented at Peer-Reviewed Scientific Conferences 9

1. Investigation Of The Heavy Metal Adsorption Properties Of Ferrochrome Flue Dust

Uğurlu E., BİROL B., GENÇTEN M., BAYRAK Y.

International Marmara Sciences Congress (Imascon Autumn) 2022 Proceedings Book, Kocaeli, Turkey, 9 - 10 December 2022, pp.38, (Summary Text)

2. Dependency of Eutectic Spacing and Microhardenss on Directions and Magnitudes of Uniform Electrical Field in the Al-Cu Eutectic Alloy

Basit S., Erol M., Bayrak Y., Maraşlı N.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 - 27 October 2018, pp.1099-1102, (Full Text)

3. Magnesium Metal Production with Magneterm Process by Using Aluminum Powder

Bayrak Y., Erol M., Basit S., Ekerim A.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 - 27 October 2018, pp.183-186, (Full Text)

4. Measurement of Th ermal Conductivity Variation with Temperature for Solid Materials Using Longitudinal Heat Flow Method

Erol M., Basit S., Bayrak Y., Maraşlı N.

19th International Metallurgy and Materials Congress, İstanbul, Turkey, 25 - 27 October 2018, pp.276-279, (Full Text)

5. Determination of Magnesium Production Parameters by Metalothermic Reduction Method

Bayrak Y., Ekerim A.

1. INTERNATIONAL TECHNOLOGICAL SCIENCES AND DESIGN SYMPOSIUM, Giresun, Turkey, 27 - 29 June 2018, pp.1105-1112, (Full Text)

6. Magnesium Metal Production with Magneterm Process by Using Aluminum Powder

BAYRAK Y., EROL M., BASİT S., EKERİM A.

IMMC’2018 19.ULUSLARARASI METALURJİ VE MALZEME KONGRESİ, İstanbul, Turkey, 25 October 2018, pp.183-186, (Full Text)

7. Measurement of Thermal conductivity Variation with Temperature for Solid Materials using Longitudinal Heat Flow Method

EROL M., BASİT S., BAYRAK Y., MARAŞLI N.

19. Uluslararası Metalurji ve Malzeme Kongresi, IMMC 2018, İstanbul, Turkey, 21 October 2018, pp.207, (Full Text)

8. APPLICATION OF ECAP ON COMMERCIAL PURITY ALUMINUM

Evcimen N., BAYRAK Y., EKERİM A.

TMS 2010 Annual Meeting Supplemental Proceedings on Materials Processing and Properties, Washington, United States Of America, 14 - 18 February 2010, pp.83-88, (Full Text)

9. The Effect of Severe Plastik Plastik Deformation on the Properties of Aluminium

Bayrak Y., Sezer R., Ekerim A.

5. Uluslararası İleri Teknolojiler Sempozyumu (IATS'09), Karabük, Turkey, 13 - 15 May 2009, pp.727-732, (Full Text)

Metrics

Publication

Publication (WoS)

Publication (Scopus)

Citation (WoS)

119

H-Index (WoS)

Citation (Scopus)

136

H-Index (Scopus)

Citation (Scholar)

139