Dr.Öğr.Üyesi Hakan YILMAZER

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

An investigation over microstructure and HIP processing effects on wear performance of pure chromium parts fabricated by laser powder bed fusion

GÜNAY BULUTSUZ A., Gulec B., Gokcekaya O., Gardstam J., Nakano T., YILMAZER H.

International Journal of Refractory Metals and Hard Materials , cilt.120, 2024 (SCI-Expanded)

Microstructural evolution and intermetallic formation in Zn-3Mg (wt%) powder mixture processed by high-pressure torsion

Rahman T., Yılmazer H., Dikici B., Edalati K., Poplawsky J. D., Boehlert C. J.

Journal of Alloys and Compounds , cilt.968, 2023 (SCI-Expanded)

A comprehensive study on microstructure, in-vitro biodegradability, bacterial sensitivity, and cellular interactions of novel ternary Zn-Cu-xAg alloys for urological applications

Yılmazer H., Basit S., Şen A., Yilmazer Y., Dalbayrak B., Arisan E., et al.

Journal of Alloys and Compounds , cilt.965, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

In-vitro corrosion and surface properties of PVD-coated β-type TNTZ alloys for potential usage as biomaterials: Investigating the hardness, adhesion, and antibacterial properties of TiN, ZrN, and CrN film

Ali L., Dikici B., Aslan N., Yilmazer Y., Şen A., Yılmazer H., et al.

Surface and Coatings Technology , cilt.466, 2023 (SCI-Expanded)

Effect of Plastic Deformation on the Structure and Mechanical Properties of the Zn-4Ag-1Cu Zinc Alloy

Khafizova E., Fakhretdinova E., Islamgaliev R., Polenok M., Sitdikov V., Yılmazer H.

Materials , cilt.16, sa.13, 2023 (SCI-Expanded)

Investigation of the Influence of High-Pressure Torsion and Solution Treatment on Corrosion and Tribocorrosion Behavior of CoCrMo Alloys for Biomedical Applications

YILMAZER H., Caha I., DİKİCİ B., Toptan F., IŞIK M., Niinomi M., et al.

Crystals , cilt.13, sa.4, 2023 (SCI-Expanded)

Corrosion response and biocompatibility of graphene oxide (GO)–serotonin (Ser) coatings on Ti6Al7Nb and Ti29Nb13Ta4.6Zr (TNTZ) alloys fabricated by electrophoretic deposition (EPD)

Oktay A., YILMAZER H., Przekora A., Yilmazer Y., Wojcik M., DİKİCİ B., et al.

Materials Today Communications , cilt.34, 2023 (SCI-Expanded)

Selenium and clarithromycin loaded PLA-GO composite wound dressings by electrospinning method

Ciftci F., Ayan S., DUYGULU N., Yilmazer Y., Karavelioglu Z., Vehapi M., et al.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS , cilt.71, sa.12, ss.898-909, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

A systematic study of β-type Ti-based PVD coatings on magnesium for biomedical application

Zarka M., DİKİCİ B., Niinomi M., EZİRMİK K. V., Nakai M., YILMAZER H.

Vacuum , cilt.183, 2021 (SCI-Expanded)

3D printing of PVA/hexagonal boron nitride/bacterial cellulose composite scaffolds for bone tissue engineering

Aki D., Ulag S., ÜNAL S., ŞENGÖR M., EKREN N., Lin C., et al.

MATERIALS & DESIGN , cilt.196, 2020 (SCI-Expanded)

Current status and perspectives of zinc-based absorbable alloys for biomedical applications

Hernández-Escobar D., Champagne S., YILMAZER H., DİKİCİ B., Boehlert C. J., Hermawan H.

Acta Biomaterialia , cilt.97, ss.1-22, 2019 (SCI-Expanded)

Strength enhancement of an aluminum alloy through high pressure torsion

Okeke U., YILMAZER H., Sato S., Boehlert C. J.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.760, ss.195-205, 2019 (SCI-Expanded)

Microstructural evolution and intermetallic formation in Zn-Mg hybrids processed by high-pressure torsion

Hernández-Escobar D., Rahman Z. U., YILMAZER H., Kawasaki M., Boehlert C. J.

Philosophical Magazine , cilt.99, sa.5, ss.557-584, 2019 (SCI-Expanded)

Synthesis and Characterization of Hydroxyapatite/TiO2 Coatings on the beta-Type Titanium Alloys with Different Sintering Parameters using Sol-Gel Method

DİKİCİ B., Niinomi M., Topuz M., Say Y., AKSAKAL B., YILMAZER H., et al.

PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES , cilt.54, sa.3, ss.457-462, 2018 (SCI-Expanded)

Microstructural evolution and mechanical properties of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion

Isik M., Niinomi M., Cho K., Nakai M., Liu H., Yilmazer H., et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS , cilt.59, ss.226-235, 2016 (SCI-Expanded)

The Effect of Post-Heat Treatment on Microstructure of 316L Cold-Sprayed Coatings and Their Corrosion Performance

Dikici B., YILMAZER H., Ozdemir I., Isik M.

JOURNAL OF THERMAL SPRAY TECHNOLOGY , cilt.25, sa.4, ss.704-714, 2016 (SCI-Expanded)

Grain Refinement Mechanism and Evolution of Dislocation Structure of Co-Cr-Mo Alloy Subjected to High-Pressure Torsion

Isik M., Niinomi M., Liu H., Cho K., Nakai M., Horita Z., et al.

MATERIALS TRANSACTIONS , cilt.57, sa.7, ss.1109-1118, 2016 (SCI-Expanded)

Developing biomedical nano-grained beta-type titanium alloys using high pressure torsion for improved cell adherence

YILMAZER H., Sen M., Niinomi M., Nakai M., Liu Huihong L. H., Cho K., et al.

RSC ADVANCES , cilt.6, sa.9, ss.7426-7430, 2016 (SCI-Expanded)

Microstructural refinement and wear property of Al-Si-Cu composite subjected to extrusion and high-pressure torsion

Gode C., Yilmazer H., Ozdemir I., TODAKA Y.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.618, ss.377-384, 2014 (SCI-Expanded)

Microstructural evolution of precipitation-hardened beta-type titanium alloy through high-pressure torsion

Yilmazer H., Niinomi M., Cho K., Nakai M., Hieda J., SATO S., et al.

ACTA MATERIALIA , cilt.80, ss.172-182, 2014 (SCI-Expanded)

Mechanical properties of a medical beta-type titanium alloy with specific microstructural evolution through high-pressure torsion

Yilmazer H., Niinomi M., Nakai M., Cho K., Hieda J., TODAKA Y., et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS , cilt.33, sa.5, ss.2499-2507, 2013 (SCI-Expanded)

Heterogeneous grain refinement of biomedical Ti-29Nb-13Ta-4.6Zr alloy through high-pressure torsion

Nakai M., Niinomi M., Hieda J., Yilmazer H., TODAKA Y.

SCIENTIA IRANICA , cilt.20, sa.3, ss.1067-1070, 2013 (SCI-Expanded)

Heterogeneous structure and mechanical hardness of biomedical beta-type Ti-29Nb-13Ta-4.6Zr subjected to high-pressure torsion

Yilmazer H., Niinomi M., Nakai M., Hieda J., TODAKA Y., AKAHORI T., et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS , cilt.10, ss.235-245, 2012 (SCI-Expanded)

The effect of extrusion and high-pressure torsion on the properties of Alumix-231

Ozdemir I., Gode C., Yilmazer H., Callioglu H.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.532, ss.573-578, 2012 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

VASCULAR ARTERY SIMULATION MODEL FABRICATION FOR PRE-SURGERY KIT FOR STENT APPLICATION THROUGH 3D PRINTING

Yılmazer H., Uğurtaş T.

International Journal of 3D Printing Technologies and Digital Industry , cilt.7, 2023 (Hakemli Dergi)

A review on the hydrogels used in 3D bio-printing

TOPUZ M., DİKİCİ B., GAVGALI M., YILMAZER H.

International Journal of 3D Printing Technologies and Digital Industry , cilt.2, ss.68-75, 2018 (Hakemli Dergi)

3D Printing for Tissue Engineering Applications

Hacıoğlu A., Yılmazer H., Üstündağ C. B.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.21, sa.1, ss.221-227, 2018 (ESCI)

Zirkonya Takviyeli Hidroksiapatit (HA) Bazlı Biyoaktif Hibrid Kaplamaların Korozyon Duyarlılıkları

TOPUZ M., DİKİCİ B., KOÇ S., YILMAZER H., NIINOMI M., MASAAKI N.

e-Journal of New World Sciences Academy , cilt.12, ss.66-77, 2017 (Hakemli Dergi)

Nanostructure of β-type titanium alloys through severe plastic deformation

Yilmazer H., Niinomi M., Cho K., Nakai M., Hieda J., Sato S., et al.

Advanced Materials Letters , cilt.5, sa.7, ss.378-383, 2014 (Scopus)

Effect of high-pressure torsion processing on microstructure and mechanical properties of a novel biomedical β-type Ti-29Nb-13Ta-4.6Zr after cold rolling

Yilmazer H., Niinomi M., Akahori T., Nakai M., Todaka Y.

International Journal of Microstructure and Materials Properties , cilt.7, ss.168-186, 2012 (Scopus)

Treatment of Surface Properties of Titanium with Plasma (Ion) Nitriding

YILMAZER H., YILMAZ Ş., AÇMA M. E.

Defect and Diffusion Forum , cilt.283286, ss.401-405, 2009 (Scopus)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Three-Dimensional Printing-Based Fabrication and Enhancement of Nerve Tissue Connectors Augmented with Nanoparticles

Kaçar N., BERBER H., YILMAZER H., SADIKOĞLU H.

Applications of Chemistry in Nanosciences and Biomaterials Engineering, BUCAREST, Romanya, 28 - 30 Haziran 2023

Production and Development of Nervous Tissue Connectors Functioned with Nanoparticle, Pharmaceutical and Animal Derived Extracellular Matrix by 3D Printing

Kaçar N., BERBER H., YILMAZER H., SADIKOĞLU H.

The 16th International Scientific Research Congress, 23 - 24 Mart 2023

Investigation of corrosion behavior of ZrN-based PVD coatings on Ti-29Nb-13Ta-4.6Zr alloy in Hank's solution

Ali L. A., Aslan N., YILMAZER H., Niinomi M., Sen A., DİKİCİ B.

3rd International Conference on Innovative Research in Applied Science, Engineering and Technology, IRASET 2023, Mohammedia, Fas, 18 - 19 Mayıs 2023

Mangalı Çelikte KAynak Parametrelerinin Kaynak Akışı, Mikroyapı ve Mekanik Özellikler Üzerine Etkisi

Alkuş G., Yılmazer H.

10. International Congress on Engineering, Architecture and Design, İstanbul, Türkiye, 24 - 26 Aralık 2022, cilt.1, ss.1673

Manganlı Çelikte Kaynak Parametrelerinin Kaynak Akışı, Mikroyapı ve Mekanik Özellikler Üzerine Etkisi

ALKUŞ G., YILMAZER H.

10th International Congress on Engineering, Architecture and Design, İstanbul, Türkiye, 24 Aralık 2022

Development of tissue scaffolds through 3D bioprinting for burn wound healing

Tokat P., METE GÜNAYDIN H., YILMAZER Y., GÜNDÜZ O., YILMAZER H., SADIKOĞLU H.

5th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Antalya, Türkiye, 20 - 23 Temmuz 2021

Microstructure and mechanical properties of the UFG magnesium alloy Mg-1%Ca

Kulyasova O., Islamgaliev R., Lin H. C., YILMAZER H.

International Conference on Processing and Manufacturing of Advanced Materials Processing, Fabrication, Properties, Applications, THERMEC 2021, Vienna, Avusturya, 10 - 14 Mayıs 2021, cilt.1016 MSF, ss.768-773

Effect of Equal Channel Angular Pressing Parameters on Meta-Stable Beta Titanium Alloy with Changeable Young ’ s Modulus

Mahmutoğlu M. A., Günay Bulutsuz A., Nakai M., Yapıcı G. G., Yılmazer H.

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, cilt.1, ss.1013-1015

Nanostructured Biomedical Co-Cr-Mo alloys: Surface Susceptibilities and Cellular Responses

Yılmazer H., Rencüzoğullari Ö. B., Arısan E. D., Işık M., Dikici B., Niinomi M., et al.

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019

Preparation of Hydroxyapatite/Chitosan Hybrid Coatings on β-Type Ti alloys and Theirs In-vitro Corrosion Resistance

TOPUZ M., DİKİCİ B., NIINOMI M., YILMAZER H., NAKAI M.

X International Symposium on Materials (MATERIAIS 2019), Lizbon, Portekiz, 14 - 17 Nisan 2019, ss.59

Investigation of Copper Alloys After Equal Channel Angular Pressing - Conform

Gökduman A., Bakkaloğlu A., Yılmazer H.

19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 - 27 Ekim 2018, ss.342-345

Tribocorrosion Behavior of Nanostructured Biomedical Co-Cr- Mo Alloys Through High Pressure Torsion

YILMAZER H., TOPTAN F., Niinomi M., DİKİCİ B., Alves A., Çaha İ., et al.

Materials ScienceTechnology-2018, Columbus, Amerika Birleşik Devletleri, 14 - 17 Ekim 2018

Achieving high-strength intermetallic through High-Pressure Torsion in Zn-Mg hybrids

YILMAZER H., TOPTAN F., Niinomi M., DİKİCİ B., Alves A., Çaha İ., et al.

Materials ScienceTechnology-2018, Columbus, Amerika Birleşik Devletleri, 14 - 17 Ekim 2018

A Review on The Hydrogels Used in 3D Bioprinting

TOPUZ M., DİKİCİ B., GAVGALI M., YILMAZER H.

3rd International Congress on 3D Printing (Additive Manufacturing)Technologies and Digital Industry 2018, Antalya, Türkiye, 19 - 21 Nisan 2018, ss.135-138

Electrochemical Impedance Spectroscopy (EIS) Evaluation of Biomedical Nanostructured β-type Titanium Alloys

YILMAZER H., DİKİCİ B., NIINOMI M., NAKAI M.

1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.388-389

Electrochemical Impedance Spectroscopy (EIS) Evaluation of Biomedical Nanostructured β-type titanium alloys

YILMAZER H., DİKİCİ B., Niinomi M., Nakai M.

1st International Symposium of Light Alloys and Composite Materials (ISLAC), Karabük, Türkiye, 22 - 24 Mart 2018

β- type Ti-29Nb-13Ta-4.6Zr alloys subjected to solution heat treatment after severe cold rolling

YILMAZER H., Abed M. S., Niinomi M., Nakai M.

1st International Symposium Light Alloys and Composite Materials (ISLAC), Karabük, Türkiye, 22 - 24 Mart 2018

Ultrasonic Assistance for Severe Plastic Deformation Applications

Hermawan H., YILMAZER H.

1st International Symposium Light Alloys and Composite Materials (ISLAC), Karabük, Türkiye, 22 - 24 Mart 2018

Updates on magnesium-based absorbable metals”, 1st Int. Symp. Light Alloys and Composite Materials (ISLAC)

Hermawan H., YILMAZER H.

1st International Symposium Light Alloys and Composite Materials (ISLAC), Karabük, Türkiye, 22 - 24 Mart 2018

High-pressure torsion as a novel technique for processing high strength Zn-based Alloys

YILMAZER H., TOPTAN F., Niinomi M., DİKİCİ B., Alves A., Çaha İ., et al.

TMS-2018-14th Anual Meeting and Exhibition, Phoenix, Arizona, Amerika Birleşik Devletleri, 11 - 15 Mart 2018

Surface Biocompatibility of Nanostructured Co-Cr-Mo alloysthrough Severe Plastic Deformation

YILMAZER H., ARISAN E. D., DİKİCİ B., IŞIK M., NIINOMI M.

Functional Surfaces and Interfaces Workshop, İstanbul, Türkiye, 25 Kasım 2017

The synthesis and determination of mechanical properties of metal oxide-reinforced hydroxyapatite based ceramic coatings

TOPUZ M., KOÇ S., DİKİCİ B., NIINOMI M., NAKAI M., YILMAZER H.

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.378

Thermomechanical processing and its effects on microstructure and properties of β type Ti-29Nb- 13Ta-4.6Zr alloy

Abed M. S., YILMAZER H., Niinomi M., YAPICI G. G.

2nd International Conference on Materials Science and Technology, Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.737

In-vitro corrosion responses of bioactive hybrid coatings

DİKİCİ B., NIINOMI M., TOPUZ M., KOÇ S., YILMAZER H., NAKAI M.

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.379

Biomedical Beta-type Ti-29Nb-13Ta-4.6Zr Alloys: Importance, Fabrication and Thermomechanical Treatment

YILMAZER H., Niinomi M.

2nd International Conference on Materials Science and Technology, Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.635

Comparison of corrosion behaviors of β-type Ti29Nb13Ta4.6Zr alloys with α and αβ type titanium alloys

DİKİCİ B., NIINOMI M., TOPUZ M., YILMAZER H., NAKAI M.

2nd International Conference on Advanced Engineering Technologies (ICADET 2017), Bayburt, Türkiye, 21 - 23 Eylül 2017

High pressure torsion applications on dilute copper alloys

KÖKLÜ H., YILMAZER H., GÖDE C., DİKİCİ B., TODAKA Y., GÖKER H.

3rd International Iron Steel Symposium, Karabük, Türkiye, 3 - 05 Nisan 2017, ss.79-82

Nano-grained Co-Cr-Mo alloys and Corrosion through Severe plastic Deformation

YILMAZER H., DİKİCİ B., NIINOMI M., IŞIK M., NAKAI M., HORITA Z.

20th International ESAFORM Conference on Material Forming, Dublin, İrlanda, 26 - 28 Nisan 2017

Development of high value alloys without critical raw materials through high entropy alloys

YILMAZER H., DİKİCİ B.

3rd International Iron Steel Symposium, Karabük, Türkiye, 3 - 05 Nisan 2017, ss.238

Corrosion‐Resistant High Entropy Stainless Steels — A Perspective

DİKİCİ B., YILMAZER H.

3rd International Iron Steel Symposium, Karabük, Türkiye, 3 - 05 Nisan 2017, ss.14

3D Printing for Tissue Engineering Applications

Hacıoğlu A., YILMAZER H., ÜSTÜNDAĞ C. B.

INTERNATIONAL SYMPOSIUM ON 3D PRINTING TECHNOLOGIES 3D-PTS2017, 3 - 04 Nisan 2017

High performance copper and copper alloys fabricated by severe plastic deformation

GÖKDUMAN A., YILMAZER H., GÖDE C., DİKİCİ B., DVORAK J., SKLENICKA V., et al.

3rd International Iron Steel Symposium, Karabük, Türkiye, 3 - 05 Nisan 2017, ss.75-78

Electrochemical behaviors of biomedical nano-grained β-type titanium alloys

YILMAZER H., DIKICI B., Niinomi M., Nakai M., Lui H., TODAKA Y., et al.

9th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2016, Graz, Avusturya, 29 Mayıs - 03 Haziran 2016, cilt.879, ss.2549-2554

PREPARATION AND CHARACTERIZATION OF CHITOSAN HYDROXYAPATITE SOL GEL COATING ON Ti 6Al 4V

DİKİCİ B., YILMAZER H., TOPUZ M., KOÇ S., NIINOMI M.

6th International Conference on Advanced Materials and Systems (ICAMS 2016), Bukres, Romanya, 20 - 22 Ekim 2016

CORROSION SUSCEPTIBILITY OF HYDROXYAPATİTE HA BASED ZIRCONIA REINFORCED BIOACTIVE HYBRID COATINGS

TOPUZ M., DİKİCİ B., KOÇ S., YILMAZER H., NAKAİ M., NIINOMI M.

14. Uluslararası Korozyon Sempozyumu (KORSEM 2016), 5 - 07 Ekim 2016, ss.1-10

SYNTHESIS AND CHARACTERIZATION OF SOL GEL HYDROXYAPATITE COATINGS ON THE BETA TYPE TITANIUM ALLOYS THE EFFECT OF SINTERING CONDITIONS

DİKİCİ B., TOPUZ M., KOÇ S., YILMAZER H., NIINOMI M.

3rd International Conference on Advanced Technology Sciences (ICAT’xx16), Konya, Türkiye, 1 - 03 Eylül 2016

BETA ß TİPİ TİTANYUM ALAŞIMLARININ ELEKTROKİMYASAL KOROZYON DAVRANIŞI ÜZERİNE HYDROXYAPATİTE ESASLI BİYOAKTİF KAPLAMALARIN ETKİSİ

DİKİCİ B., TOPUZ M., KOÇ S., YILMAZER H., NIINOMI M., NAKAI M.

12. Ulusal Kimya Mühendisliği Kongresi (UKMK2016), İzmir, Türkiye, 23 - 26 Ağustos 2016, ss.419

Nanoyapılı Beta tipi Titanyum alaşımları Mekanik ve Biyolojik uyumluluk Japonca

KEN C., Mitsuo N., MASAAKI N., HUIHONG L., YILMAZER H., YOSHIKAZU T., et al.

The 36th Annual Meeting of Japan Society for Biomaterials, Tokyo, Japonya, 17 - 18 Kasım 2015

MECHANICAL AND SURFACE FUNCTIONALITIES OF NANOSTRUCTURED TYPE TITANIUM ALLOYS THROUGH SEVERE PLASTIC DEFORMATION

KEN C., Mitsuo N., MASAAKI N., HUIHONG L., YILMAZER H., YOSHIKAZU T., et al.

Ti-2015: The 13th World Conference on Titanium, San Diego, Amerika Birleşik Devletleri, 16 - 20 Ağustos 2015

Enhanced cellular activity on biomedical nano grained type titanium alloys

YILMAZER H., NIINOMI M., NAKAI M., LIU H., TODAKA Y., ŞEN M., et al.

The 10th Anniversary International Workshop on Biomaterials in Interface Science, Zhao, Japonya, 4 - 05 Ağustos 2015

Cold spray deposition of SS316L powders on Al5052 substrates The effect of powder carrying gases and heat treatment on the microstructure

DİKİCİ B., YILMAZER H., ÖZDEMİR İ., Işık M.

29th International Conference on Surface Modification Technologies (SMT29), Copenhagen, Danimarka, 9 - 12 Haziran 2015

Osteoblast attachment on nanostructured type titanium alloys subjected to severe plastic deformation

KEN C., Mitsuo N., MASAAKI N., HUIHONG L., YILMAZER H., YOSHIKAZU T., et al.

The 65th General Session of the Japanese Society for Dental Materials and Devices, Sendai, Japonya, 11 - 12 Nisan 2015, cilt.34, ss.123

Cellular behavior of nanostructured type Ti 29Nb 13Ta 4 6Zr through severe plastic deformation

YILMAZER H., NIINOMI M., KEN C., MASAAKI N., HUIHONG L., YOSHIKAZU T., et al.

The 156th Annual Meeting of the Japan Institute of Metals and Materials, Tokyo, Japonya, 18 - 20 Mart 2015

Osteoblast cell behavior on biomedical type titanium alloys

YILMAZER H., NIINOMI M., KEN C., NAKAI M., HUIHONG L., TODAKA Y., et al.

The 128th Conference of Japan Institute of Light Metals, 16 - 17 Mart 2015

Nanostructured ß-type titanium alloys: mechanical and biological biocompatibility

YILMAZER H., Niinomi M., Cho K., Nakai M., Todaka Y., Dikici B., et al.

Conference on Innovative Materials and Structure Technologies in Metallurgical Engineering, METECH ’14, 01 Kasım 2014

Nanostructure and fatigue behavior of ß-type titanium alloy subjected to high-pressure torsion after aging treatment

YILMAZER H., Niinomi M., Cho K., Nakai M., Hieda J., Todaka Y.

11th International Fatigue Congress, Fatigue 2014, 01 Mart 2014

Microstructural analysis of biomedical Co-Cr-Mo alloy subjected to high-pressure torsion processing

Isik M., Niinomi M., Cho K., Nakai M., Hieda J., Yilmazer H., et al.

5th International Symposium on Advance Ceramics (ISAC) / 3rd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT), Wuhan, Çin, 9 - 12 Aralık 2013, cilt.616, ss.263-269

Nanostructure and fatigue behavior of beta-type titanium alloy subjected to high-pressure torsion after aging treatment

Yimazer H., Niinomi M., Cho K., Nakai M., Hieda J., Todaka Y.

11th International Fatigue Congress, Melbourne, Avustralya, 2 - 07 Mart 2014, ss.9-14

Nano-structural control of ß-type titanium alloys through severe plastic deformation

YILMAZER H., Niinomi M., Cho K., Nakai M., Hieda J., Sato S., et al.

Advanced Materials World Congress, 01 Ekim 2013

Effect of aging treatment on corrosion susceptibilities of biomedical nanostructured ß-type titanium alloys through severe plastic deformation

Dikici B., YILMAZER H., Niinomi M., Cho K., Nakai M., Hieda J., et al.

9th Nanoscience and Nanotechnology Conference (NanoTR-9), 01 Haziran 2013

Mechanical Performances of Biomedical Beta-type Titanium Alloy through Heat Treatment and Severe Plastic Deformation

AKAHORI T., NIINOMI M., NAKAI M., Yilmazer H., FUKUI H., TODAKA Y.

Materials and Processes for Medical Devices Conference, Minnesota, Amerika Birleşik Devletleri, 8 - 10 Ağustos 2011, ss.27-30

Effect of high pressure torsion processing on corrosion behavior of a new biomedical type titanium alloy

DİKİCİ B., YILMAZER H., NIINOMI M., NAKAI M., ÖZDEMİR İ., GAVGALI M.

Corrosion-2012, 4 - 06 Haziran 2012, cilt.9, ss.95-100

Microstructure and mechanical properties of a biomedical beta-type titanium alloy subjected to severe plastic deformation after aging treatment

YILMAZER H., Niinomi M., Nakai M., Hieda J., Akahori T., Todaka Y.

2nd International Symposium on Advanced Synthesis and Processing Technology for Materials (ASPT2011)/8th Materials Science School for Young Scientists (KINKEN-WAKATE2011), Sendai, Japonya, 1 - 02 Aralık 2011, cilt.508, ss.152-154