Prof. Haydar LİVATYALI

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

Formability improvement in Ti–6Al–4 V sheet at room temperature by pulsating hydraulic bulging: experimental and numerical investigations

Türköz M., Toros S., Dilmeç M., Livatyalı H., Kotan H., Halkacı H. S.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.1, no.1, pp.1-16, 2022 (SCI-Expanded)

Microstructural Characterization of Improved Formability of Ti-6Al-4V Sheet by Pulsating Hydraulic Bulging at Room Temperature

Yapan Y. F., Öztürk O., Türköz M., Dilmeç M., Livatyalı H., Halkacı H. S., et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, pp.1-12, 2022 (SCI-Expanded) Sustainable Development

Artificial Intelligence in Foreign Object Classification in Fenceless Robotic Work Cells Using 2-D Safety Cameras

Özkahraman M., Livatyali H.

TEHNICKI VJESNIK, vol.29, no.5, pp.1491-1498, 2022 (SCI-Expanded)

An improved Harris Hawks Optimization algorithm for continuous and discrete optimization problems

Gezici H., Livatyali H.

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE, vol.113, 2022 (SCI-Expanded)

Experimental comparison of straight flanging and rotary die bending based on springback

Livatyali H., Turan S. E., Birol F., Turkoz M.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.120, no.7-8, pp.4373-4386, 2022 (SCI-Expanded)

Chaotic Harris hawks optimization algorithm

Gezici H., Livatyali H.

JOURNAL OF COMPUTATIONAL DESIGN AND ENGINEERING, vol.9, no.1, pp.216-245, 2022 (SCI-Expanded)

Hybrid flower pollination algorithm approach for the two-dimensional bin packing problem

Gezici H., Livatyali H.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, vol.37, no.3, pp.1523-1534, 2022 (SCI-Expanded)

Design and validation of a camera-based safety system for fenceless robotic work cells

Ozkahraman M., Yilmaz C., Livatyali H.

Applied Sciences (Switzerland), vol.11, no.24, 2021 (SCI-Expanded)

Effects of rapid conductive heating and passive cooling with cold dies on hot-forming formability and final mechanical properties of boron steel sheets

Kocar O., Livatyalı H.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, vol.235, no.2, pp.309-319, 2021 (SCI-Expanded)

Prediction of residual stresses in ball burnishing TI6AL4V thin sheets

Livatyali H., Has E., Turkoz M.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.110, pp.1083-1093, 2020 (SCI-Expanded)

Investigation on the mechanical properties of press-hardened boron steel sheets using the conductive heating technique

Kocar O., LİVATYALI H.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, vol.234, no.8, pp.1084-1098, 2020 (SCI-Expanded)

Effect of the type of gasifying agent on gas composition in a bubbling fluidized bed reactor

AYDAR E., GUL S., UNLU N., AKGUN F., Livatyali H.

JOURNAL OF THE ENERGY INSTITUTE, vol.87, no.1, pp.35-42, 2014 (SCI-Expanded) Sustainable Development

Effect of cutting energy on fatigue behavior of threaded specimens

Akyildiz H. K., Livatyali H.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.70, pp.547-557, 2014 (SCI-Expanded) Sustainable Development

Design of Threaded Fatigue Test Specimen for Machining

Akyildiz H. K., Livatyali H.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, vol.135, no.4, 2013 (SCI-Expanded)

Effects of sheet thickness and anisotropy on forming limit curves of AA2024-T4

Dilmec M., Halkaci H. S., OZTURK F., Livatyali H., Yigit O.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, vol.67, pp.2689-2700, 2013 (SCI-Expanded)

PREDICTION AND EXPERIMENTAL ANALYSIS OF CUTTING FORCES DURING MACHINING OF PRECISION EXTERNAL THREADS

Akyildiz H. K., Livatyali H.

MACHINING SCIENCE AND TECHNOLOGY, vol.15, no.4, pp.485-506, 2011 (SCI-Expanded)

An experimental analysis of drawing characteristics of a dual-phase steel through a round drawbead

Livatyali H., Firat M., GURLER B., Ozsoy M.

MATERIALS & DESIGN, vol.31, no.3, pp.1639-1643, 2010 (SCI-Expanded)

Effects of machining parameters on fatigue behavior of machined threaded test specimens

Akyildiz H. K., Livatyali H.

MATERIALS & DESIGN, vol.31, no.2, pp.1015-1022, 2010 (SCI-Expanded)

Improving the accuracy of contact-type drawbead elements in panel stamping analysis

Firat M., Livatyali H., CICEK O., ONHON M. F.

MATERIALS & DESIGN, vol.30, no.10, pp.4003-4011, 2009 (SCI-Expanded)

Roll forming of branched profiles

GOERTAN M. O., VUCIC D., GROCHE P., Livatyali H.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.209, no.17, pp.5837-5844, 2009 (SCI-Expanded)

Design of over-crown in sheet metal stamping using finite element method

Livatyali H., ERGELDI M.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.173, no.1, pp.14-20, 2006 (SCI-Expanded)

Experimental investigation on forming defects in flat surface-convex edge hemming: roll, recoil and warp

Livatyali H., LARRIS S.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.153, pp.913-919, 2004 (SCI-Expanded)

Experimental investigation of forming defects in flat surface-convex edge hemming

Livatyali H., LAXHUBER T., ALTAN T.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.146, no.1, pp.20-27, 2004 (SCI-Expanded)

Computer aided die design of straight flanging using approximate numerical analysis

Livatyali H., KINZEL G., ALTAN T.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.142, no.2, pp.532-543, 2003 (SCI-Expanded)

Prediction and elimination of springback in straight flanging using computer-aided design methods Part 2: FEM predictions and tool design

Livatyali H., WU H., ALTAN T.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.120, pp.348-354, 2002 (SCI-Expanded) Sustainable Development

Prediction and elimination of springback in straight flanging using computer aided design methods Part 1. Experimental investigations

Livatyali H., Altan T.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.117, pp.262-268, 2001 (SCI-Expanded) Sustainable Development

Improvement of hem quality by optimizing flanging and pre-hemming operations using computer aided die design

Livatyali H., MUDERRISOGLU A., AHMETOGLU M., AKGERMAN N., KINZEL G., ALTAN T.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.98, no.1, pp.41-52, 2000 (SCI-Expanded)

Investigation of crack formation on the Galvalume coating of roll formed roof panels

Livatyali H., DUGGAL N., AHMETOGLU M., ALTAN T.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.98, no.1, pp.53-61, 2000 (SCI-Expanded)

Simulation of roll forming process with the 3-D FEM code PAM-STAMP

HEISLITZ F., Livatyali H., AHMETOGLU M., KINZEL G., ALTAN T.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, vol.59, pp.59-67, 1996 (SCI-Expanded)

Articles Published in Other Journals

Process optimization for hot forging of difficult parts by computer experiments and response surface analysis

Kabataş B., LİVATYALI H., AŞÇIOĞLU TEMİZTAŞ B.

Journal of Advances in Manufacturing Engineering, vol.3, no.2, pp.33-45, 2022 (Peer-Reviewed Journal)

Elektrikli Araçlar İçin Bir Şasi Dinamometresi Tasarımı

Livatyalı H., Altay H.

Makina Tasarım ve Imalat Dergisi, vol.20, no.1, pp.17-28, 2022 (Peer-Reviewed Journal)

Modeling, Simulation and Validation of a Tractor Wet Clutch Controlled by Proportional Valve

Yel A. E., LİVATYALI H.

International Journal of Automotive Science and Technology, vol.5, no.1, pp.8-18, 2021 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

Investigation of the microstructural reasons for the increase in formability of Ti-6Al-4V alloy by pulsating hydraulic bulging

YAPAN Y. F., ÖZTÜRK O., TÜRKÖZ M., DİLMEÇ M., LİVATYALI H., HALKACI H. S., et al.

Materials Science and Engineering Congress (MSE), Darmstadt, Germany, 27 - 29 September 2022

Küçük Ölçekli İnsansız Helikopter Dinamiğinde Kaosun Araştırılması ve Kontrolü

ÇAKIR A., LİVATYALI H.

GLOBCER 2022: 2nd GLOBAL CONFERENCE on ENGINEERING RESEARCH, Bandırma, Turkey, 07 September 2022, vol.1, pp.400-401

Fınıte Element Analysıs of Dıe Quenchıng 22Mnb5 Steel Sheets

LİVATYALI H.

ICTP 2021-The 13th International Conference on the Technology of Plasticity, Columbus Ohio, United States Of America, 25 July 2021, vol.1, pp.15

Characterization of Biocrude Oil from Catalytic Liquefaction of Biogasification Sludge

Ünsal M., AKSOY P., LİVATYALI H., BEDİR H., Önoğlu H. A.

Bioenergy 2013, Jywaskala, Finland, 4 - 06 September 2013

hot forging process design and sensitivity analysis for long, thin and tubular components

Kabataş B., Aşçioğlu Temiztaş B., Livatyali H.

5th Int. Conf. on Advances in Mechanical Engineering, İstanbul, Turkey, 17 - 19 December 2019, vol.1, pp.625-632

OPTIMIZATION OF THE HARD-TURNING OF AISI 4340 STEEL FOR SURFACE ROUGHNESS USING THE TAGUCHI METHOD

Livatyalı H., Akyıldız H. K., Kaya M. T., Özdemir M., İynen O.

UTİS 2019-10th International Congress on Machining, Antalya, Turkey, 7 - 09 November 2019, pp.7-12

EXPERIMENTAL INVESTIGATION ON HARD-TURNING OF AISI 4140 STEEL

Livatyalı H., Akyıldız H. K., Kaya M. T., Özdemir M.

UTİS 2019-10th International Congress on Machining, Antalya, Turkey, 7 - 09 November 2019, pp.1-6

1D MODELLING AND SIMULATING OF WET CLUTCH FOR TRANSMISSION CONTROLLED BY PROPORTIONAL VALVE

Yel A. E., LİVATYALI H.

THE INT. CONF. ON MATERIALS SCIENCE MECHANICAL AND AUTOMOTIVE ENGINEERINGS AND TECHNOLOGY, İzmir, Turkey, 10 April 2018, vol.1, no.1, pp.41-44

TALAS KALDIRMA İLE VİDALI NUMUNE İMALİ VE YORULMA DENEYLERİNDEKİ PROBLEMLER

LİVATYALI H., AKYILDIZ H. K., KAYA m. t.

UTİS-2016 Uluslararası Talaşlı İmalat Sempozyumu, İstanbul, Turkey, 3 - 05 November 2016

Production of biocrude oil by waste biomass CatLiq process and characterization of oils

AKSOY P., Ünsal M., LİVATYALI H., Önoğlu H. A.

International Congress and Expo on Biofuels & Bioenergy, Valencia, Spain, 25 August 2015

Effect of operating conditions on gas composition in atmospheric and bubbling fluidized bed gasification of coal

AYDAR E., GUL S., UNLU N., AKGUN F., Livatyali H.

29th Annual International Pittsburgh Coal Conference 2012, PCC 2012, Pittsburgh, PA, United States Of America, 15 - 18 October 2012, vol.1, pp.527-535 Sustainable Development

Improving the performance of contact-type drawbead elements in stamping process analysis

Firat M., Livatyali H., CICEK O., FATIH ONHON M.

9th International Conference on Technology of Plasticity, ICTP 2008, Gyeongju, South Korea, 7 - 11 September 2008, pp.1437-1442

Finite element simulation of flexible roll forming a case study on variable width U channel

GÜLÇEKEN e., ANDRE a., SEDLMAİER a., LİVATYALI H.

4th Int Conf. of Design and Manufacturing of Dies, Molds and Machines, 20 - 23 June 2007

Computer aided dDesign for bending, flanging and hemming of steels and Aluminum alloys

Livatyalı H.

PMA-Metal-Form 1997 Conference, Illinois, United States Of America, 3 - 04 September 1997, pp.1-6

Books & Book Chapters

Chapter 23 Roll Forming

GÖRTAN M. O., LİVATYALI H., Groche P.

in: SHEET METAL FORMING: Processes and Applications, Taylan Altan ve A Erman Tekkaya, Editor, ASM International, pp.211-225, 2012

Little Book of Science Minik Ansiklopedi Bilim

LİVATYALI H.

TUBITAK Popüler Bilim Kitapları Ankara 2010, Ankara, 2010

Publications & Works

Published journal articles indexed by SCI, SSCI, and AHCI

Articles Published in Other Journals

Refereed Congress / Symposium Publications in Proceedings

Books & Book Chapters