Publications & Works

Publication Network
Published journal articles indexed by SCI, SSCI, and AHCI

Advances in xenogeneic donor decellularized organs: A review on studies with sheep and porcine-derived heart valves

Inal M. S., AVCI H., Hassan S., DARCAN C., Shin S. R., AKPEK A.
Bioengineering and Translational Medicine , vol.9, no.6, 2024 (SCI-Expanded) identifier identifier

Molecular Separation by Using Active and Passive Microfluidic chip Designs: A Comprehensive Review

Ebrahimi A., İÇÖZ K., Didarian R., Shih C., Tarim E. A., Nasseri B., et al.
Advanced Materials Interfaces , vol.11, no.2, 2024 (SCI-Expanded) identifier

In vitro recellularization and characterization of sheep pulmonary valves after decellularization for preclinical studies Koyun pulmoner kalp kapakçıklarının hücresizleştirilmesi sonrası preklinik çalışmalar için in vitro olarak yeniden hücrelendirilmesi ve karakterizasyonu

İnal M. S., DARCAN C., AKPEK A.
Journal of the Faculty of Engineering and Architecture of Gazi University , vol.40, no.1, pp.515-527, 2024 (SCI-Expanded) identifier

Detailed Analysis of the Effects of Viscosity Measurement Errors Caused by Heat Transfer during Continuous Viscosity Measurements under Various Temperature Changes and the Proposed Solution of a Non-Dimensional Parameter Called the Akpek Number

AKPEK A.
Applied Sciences (Switzerland) , vol.13, no.19, 2023 (SCI-Expanded) Creative Commons License identifier

Eggshell integrated GelMA/CSMA/HyMA hybrid hydrogels for cell therapy/tissue engineering

Yüce-Erarslan E., İzbudak B., Kızılkurtlu A. A., Topal M., AKPEK A., Bal-Öztürk A.
Journal of Applied Polymer Science , vol.140, no.34, 2023 (SCI-Expanded) identifier

Characterization of a Decellularized Sheep Pulmonary Heart Valves and Analysis of Their Capability as a Xenograft Initial Matrix Material in Heart Valve Tissue Engineering

İnal M. S., DARCAN C., AKPEK A.
Bioengineering , vol.10, no.8, 2023 (SCI-Expanded) Creative Commons License identifier identifier

Current Strategies for the Regeneration of Skeletal Muscle Tissue

ALARÇİN E., Bal-ozturk A., AVCI H., GHORBANPOOR H., DOĞAN GÜZEL F., AKPEK A., et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES , vol.22, no.11, 2021 (SCI-Expanded) Creative Commons License identifier identifier identifier

Tissue adhesives: From research to clinical translation

Bal-Ozturk A., Cecen B., Avci-Adali M., Topkaya S. N., ALARÇİN E., YAŞAYAN G., et al.
NANO TODAY , vol.36, 2021 (SCI-Expanded) identifier identifier identifier

Analysis of Surface Properties of Ag and Ti Ion-Treated Medical Textiles by Metal Vapor Vacuum Arc Ion Implantation

AKPEK A.
COATINGS , vol.11, no.1, 2021 (SCI-Expanded) Creative Commons License identifier identifier

3D Bioprinting: from Benches to Translational Applications

Heinrich M. A., Liu W., Jimenez A., Yang J., Akpek A., Liu X., et al.
SMALL , vol.15, no.23, 2019 (SCI-Expanded) Creative Commons License identifier identifier identifier

Development of a heart assist device as a vibrational viscometer that estimates blood viscosity

Akpek A.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.34, no.1, pp.235-246, 2019 (SCI-Expanded) Creative Commons License identifier

A novel design of an electromagnetically levitated vibrational viscometer for biomedical and clinical applications

Akpek A.
TURKISH JOURNAL OF ELECTRICAL ENGINEERING AND COMPUTER SCIENCES , vol.27, no.2, pp.819-831, 2019 (SCI-Expanded) Creative Commons License Sustainable Development identifier identifier

Recent advances in organ-on-a-chip technologies and future challenges: a review

AVCI H., DOĞAN GÜZEL F., EROL S., Akpek A.
TURKISH JOURNAL OF CHEMISTRY , vol.42, no.3, pp.587-610, 2018 (SCI-Expanded) Creative Commons License identifier identifier

Lung on a Chip for Drug Screening and Design

Kizilkurtlu A. A., Polat T., Aydin G. B., Akpek A.
CURRENT PHARMACEUTICAL DESIGN , vol.24, no.45, pp.5386-5396, 2018 (SCI-Expanded) Sustainable Development identifier identifier identifier

Analysis of biocompatibility characteristics of stereolithography applied three dimensional (3D) bioprinted artifical heart valves

Akpek A.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.33, no.3, pp.929-938, 2018 (SCI-Expanded) Creative Commons License identifier identifier

3D Printed Anchoring Sutures for Permanent Shaping of Tissues

Wei W., Li Y., Yang H., Nassab R., Shahriyari F., Akpek A., et al.
MACROMOLECULAR BIOSCIENCE , vol.17, no.12, 2017 (SCI-Expanded) Creative Commons License identifier identifier identifier

Extrusion Bioprinting of Shear-Thinning Gelatin Methacryloyl Bioinks

Liu W., Heinrich M. A., Zhou Y., Akpek A., Hu N., Liu X., et al.
ADVANCED HEALTHCARE MATERIALS , vol.6, no.12, 2017 (SCI-Expanded) Creative Commons License identifier identifier identifier

4D bioprinting: the next-generation technology for biofabrication enabled by stimuli-responsive materials

Li Y., Zhang Y. S., Akpek A., Shin S. R., Khademhosseini A.
BIOFABRICATION , vol.9, no.1, 2017 (SCI-Expanded) identifier identifier identifier

Effect of non-uniform temperature field in viscosity measurement

Akpek A.
JOURNAL OF VISUALIZATION , vol.19, no.2, pp.291-299, 2016 (SCI-Expanded) identifier identifier

Modification of anti-bacterial surface properties of textile polymers by vacuum arc ion source implantation

Nikolaev A. G., Yushkov G. Y., Oks E. M., Oztarhan A., Akpek A., Hames-Kocabas E., et al.
APPLIED SURFACE SCIENCE , vol.310, pp.51-55, 2014 (SCI-Expanded) identifier identifier
Refereed Congress / Symposium Publications in Proceedings

Three Dimensional (3D) Fabrication of Multilayered Heart Valve Tissues by Stereolithography technique

Akpek A.
21st National Biomedical Engineering Meeting (BIYOMUT), İstanbul, Turkey, 24 November - 26 December 2017 Sustainable Development identifier

Three Dimensional Bioprinting of Tissue Engineered Artificial Heart Valves by Stereolithography

Akpek A.
21st National Biomedical Engineering Meeting (BIYOMUT), İstanbul, Turkey, 24 November - 26 December 2017 identifier

Design of a System That Measures the Effect of Environmental Temperature on Ultrasonic Nebulizers

Sari S., Akpek A.
National Conference on Electrical, Electronics and Biomedical Engineering (ELECO), Bursa, Turkey, 1 - 03 December 2016, pp.491-495 Sustainable Development identifier

A Medical Waste Management Model for Public Private Partnership Hospitals

Kocak O., Kurtuldu H., Akpek A., Kocoglu A., Erogul O.
Medical Technologies National Conference (TIPTEKNO), Antalya, Turkey, 27 - 29 October 2016 Sustainable Development identifier

New Concept Design of an Insulin Pen for Visually Impaired or Blind Diabetius Mellitus Patients

Ucar T., Kocak O., Akpek A.
Medical Technologies National Conference (TIPTEKNO), Antalya, Turkey, 27 - 29 October 2016 Sustainable Development identifier

A New Algorithm for Segmentation and Fracture Detection in X-Ray Images

Bulut S., Ozcinar A., Ciftcioglu C., Akpek A.
Medical Technologies National Conference (TIPTEKNO), Bodrum, Turkey, 15 - 18 October 2015 Sustainable Development identifier

Remote Control of Centrifuge and Injection Systems via MATLAB and ARDUINO

Ciftcioglu C., Kocak O., Akpek A.
Medical Technologies National Conference (TIPTEKNO), Bodrum, Turkey, 15 - 18 October 2015 identifier

Electronic Pillbox Design for Demantia Patients.

Cebeci S. A., Ciftcioglu C., Kocak O., Akpek A.
Medical Technologies National Conference (TIPTEKNO), Bodrum, Turkey, 15 - 18 October 2015 Sustainable Development identifier

Design and Analysis of an Autoclave Simulation Using MATLAB/Simulink

Altinsu B., Kocak O., Akpek A.
Medical Technologies National Conference (TIPTEKNO), Antalya, Turkey, 27 - 29 October 2016 identifier

Temperature Measurement Control Problem of Vibrational Viscometers Considering Heat Generation and Heat Transfer Effect of Oscillators

Akpek A., Youn C., Kagawa T.
9th Asian Control Conference (ASCC), İstanbul, Turkey, 23 - 26 June 2013 identifier identifier
Books & Book Chapters

KİŞİSELLEŞTİRİLMİŞ TIP TEKNOLOJİSİ VE UYGULAMALARI

Akpek A.
in: SAĞLIKTA SON TRENDLER, Can ÖZLÜ, Editor, Akademi Kitabevi Yayınları, İstanbul, pp.663-680, 2021

Polimerlerin Medikal Amaçlı Kullanımları

Akpek A.
in: Polimerler: Özellikleri ve Uygulamaları, Hüseyin AVCI, Editor, ESOGÜ Basımevi, Eskişehir, pp.205-224, 2021

Yapay Organlar

Akpek A.
in: Biyomedikal Mühendisliği ve Uygulamaları, Onur Koçak; Osman Eroğlu, Editor, Elektrik Mühendisleri Odası Yayınevi, Ankara, pp.525-542, 2019
Metrics

Publication

40

Citiation (Sum Other)

1537

Project

25

Open Access

11
UN Sustainable Development Goals