Publications & Works

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

Experimental study on turning machine with permanent magnetic cutting tool

Kaplan S., ÇAKIR O., ALTAN E.
OPEN CHEMISTRY , vol.20, no.1, pp.1196-1201, 2022 (SCI-Expanded) Creative Commons License identifier identifier

Wet etching of AZ31B magnesium alloy with nitric acid

Çakır O.
EMERGING MATERIALS RESEARCH , vol.11, no.1, pp.1-5, 2022 (SCI-Expanded)

Etchants for Chemical Machining of Aluminium and Its Alloys

Çakır O.
ACTA PHYSICA POLONICA A , vol.135, no.4, pp.586-587, 2019 (SCI-Expanded) Creative Commons License identifier identifier

Chemical Machining of St37 Rod Using Etchant Substance FeCl3

Çakır O.
ACTA PHYSICA POLONICA A , vol.135, no.4, pp.583-585, 2019 (SCI-Expanded) Creative Commons License identifier identifier

The dependence of tool overhang on surface quality and tool wear in the turning process

Kıyak M., Kaner B., Şahin İ., Aldemır B., Cakir O.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , vol.51, pp.431-438, 2010 (SCI-Expanded) identifier identifier

Chemical etching of aluminium

Cakir O.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , vol.199, pp.337-340, 2008 (SCI-Expanded) identifier identifier

Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC

Ozben T., Kilickap E., Cakir O.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , vol.198, pp.220-225, 2008 (SCI-Expanded) identifier identifier

Examination of machining parameters on surface roughness in EDM of tool steel

Kiyak M., CAKIR O.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , vol.191, pp.141-144, 2007 (SCI-Expanded) identifier identifier

Surface integrity of finished turned Ti-6Al-4V alloy with PCD tools using conventional and high pressure coolant supplies

Ezugwu E. O., Bonney J., Da Silva R. B., Cakir O.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE , vol.47, no.6, pp.884-891, 2007 (SCI-Expanded) identifier identifier

Copper etching with cupric chloride and regeneration of waste etchant

ÇAKIR O.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , vol.175, pp.63-68, 2006 (SCI-Expanded) identifier identifier

Study of tool wear and surface roughness in machining of homogenised SiC-p reinforced aluminium metal matrix composite

KILIÇKAP E., Cakir O., AKSOY M., İNAN A.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , vol.164, pp.862-867, 2005 (SCI-Expanded) identifier identifier

Chemical etching of Cu-ETP copper

CAKIR O., TEMEL H., Kiyak M.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , vol.162, pp.275-279, 2005 (SCI-Expanded) identifier identifier

Comparison of gases applications to wet and dry cuttings in turning

CAKIR O., Kiyak M., ALTAN E.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , vol.153, pp.35-41, 2004 (SCI-Expanded) identifier identifier

Articles Published in Other Journals

Abrasive water-jet applications in 6 mm flat glass cuttings

İbrahim Avcı H., ÇAKIR O.
Materials Today: Proceedings , vol.80, pp.104-109, 2023 (Scopus) identifier

Examination of surface roughness values of 6061-T6 aluminum material after machining and after anodizing process

Karakoç E., ÇAKIR O.
Materials Today: Proceedings , vol.80, pp.32-39, 2023 (Scopus) identifier

Özel Takım Çeliklerinin Elektro Erozyon Yöntemi ile İşlenmesinin Karşılaştırılması

Yaman S., Çakır O.
Journal of Steel Research and Development Çelik Araştırma ve Geliştirme Dergisi , vol.2, no.2, pp.15-19, 2021 (Peer-Reviewed Journal) Creative Commons License

Improving the RF Performance of Ceramics Using Laser Assisted Machining

Güngör E., Özbek ., Shukurov S., Çakır O.
JOURNAL OF ADVANCES IN MANUFACTURING ENGINEERING , vol.1, no.4, pp.93-100, 2020 (Peer-Reviewed Journal) Creative Commons License

Investigation of the effects of EDM parameters on surface roughness

Çakır O., Yaman M.
JOURNAL OF ADVANCES IN MANUFACTURING ENGINEERING , vol.1, no.2, pp.46-55, 2020 (Peer-Reviewed Journal) Creative Commons License

EFFECTS OF PROCESS PARAMETERS IN PLASMA ARC CUTTING ON STAINLESS STEELS AND STRUCTURAL STEEL

Erbilen M., Çakır O.
MACHINES. TECHNOLOGIES. MATERIALS , vol.13, no.1, pp.23-25, 2019 (Peer-Reviewed Journal)

Study of surface quality in dry and wet external cylindrical grinding

KIYAK M., Çakir O.
International Journal of Computational Materials Science and Surface Engineering , vol.3, no.1, pp.12-23, 2009 (Scopus) identifier

Review of Etchants for Copper and Its Alloys in Wet Etching Processes

ÇAKIR O.
Key Engineering Materials , pp.460-465, 2008 (Scopus)

Study of Etch Rate and Surface Roughness in Chemical Etching of Stainless Steel

ÇAKIR O.
Key Engineering Materials , pp.837-842, 2008 (Scopus)

Selection of Cutting Fluids in Machining Processes

ÇAKIR O., YARDIMEDEN A., ÖZBEN T., KILIÇKAP E.
Journal of Achievements in Materials and Manufacturing Engineering , no.2, pp.99-102, 2007 (Scopus)

Chemical machining

Çakır O., Yardımeden A., Özben T.
Archives of Materials Science and Engineering , vol.28, no.8, pp.499-502, 2007 (Scopus)

ELEKTROKİMYASAL İŞLEME YÖNTEMİ

ÇAKIR O., ALTAN E.
METAL MAKİNA , no.56, pp.40-46, 1994 (Peer-Reviewed Journal)

FOTOKİMYASAL İŞLEME YÖNTEMİ

ÇAKIR O., ALTAN E.
METAL MAKİNA , no.51, pp.66-74, 1993 (Peer-Reviewed Journal)

COPPER ETCHING ECONOMICS

ÇAKIR O., ALLEN D.
PHOTOCHEMICAL MACHINING INSTITUTE JOURNAL (PCMI) , no.52, pp.4-7, 1993 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

Effects of Process Parameters in Plasma Arc Cutting on Stainless Steel and Structural Steel

Erbilen M., ÇAKIR O.
4th International Congress on Advances in Mechanical and Systems Engineering, CAMSE 2023, Hybrid, Jalandhar, India, 02 September 2023, vol.3108 identifier

Ultrasonic-assisted Chemical Machining of Magnesium Alloy

Odabaşı M. F., Kalaycı M., Hasanlı F., ÇAKIR O.
4th International Congress on Advances in Mechanical and Systems Engineering, CAMSE 2023, Hybrid, Jalandhar, India, 02 September 2023, vol.3108 identifier

Ensuring Tool Run-In When Milling AISI321 Steel in Various Technological Environments

Dzhemilov E., UYSAL A., ÇAKIR O., Dzhemalyadinov R., Vaniev E.
7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE 2024, Pilsen, Czech Republic, 4 - 07 June 2024, pp.188-199 identifier

Investigation on Effects of Different Graphite Grades on Electric Discharge Machining of Hybrid Tool Steel

Yaman S., ÇAKIR O.
2nd International Congress on Advances in Mechanical and Systems Engineering, CAMSE 2021, Virtual, Online, 17 - 19 July 2021, pp.833-842 identifier

ABRASIVE WATER-JET APPLICATIONS IN GLASS CUTTING

Avcı H. İ., Çakır O.
11th International Congress on Machining, İstanbul, Turkey, 9 - 11 December 2021, pp.238-244 Sustainable Development

EFFECTS OF PROCESS PARAMETERS ON SURFACE ROUGHNESS IN WEDM OF INCONEL 718

Ceylan M., Çakır O.
11th International Congress on Machining, İstanbul, Turkey, 9 - 11 December 2021, pp.253-258

Chemical Etching of Al7075 Alloy with NaOH

Çakır O.
Congress on Advances in Mechanical and Systems Engineering (CAMSE) 2021, Jalandhar, India, 17 - 19 July 2021

Investigation on Effects of Different Graphite Grades on EDM of Hybrid Tool Steel

Yaman S., Çakır O.
Congress on Advances in Mechanical and Systems Engineering (CAMSE) 2021, Jalandhar, India, 17 - 19 July 2021

WEDM of K390 Tool Steel

Yıldız U., Yaman S., Çakır O.
Congress on Advances in Mechanical and Systems Engineering (CAMSE) 2021, Jalandhar, India, 17 - 19 July 2021

Effects of Pulse On/Off Times Parameters on Surface Roughness in Wire Electrical Discharge Machining of Tool Steel

Yıldız U., Çakır O.
Fourth International Iron and Steel Symposium (UDCS’21), Karabük, Turkey, 1 - 03 April 2021, pp.234-237

Comparison of Processing of Special Tool Steels by Electro Erosion Method

Yaman S., Çakır O.
Fourth International Iron and Steel Symposium (UDCS’21), Karabük, Turkey, 1 - 03 April 2021, pp.257-261

A REVIEW OF ULTRASONIC ASSISTED HYBRID MACHINING: METHODS AND APPLICATIONS

Duman E., ÇAKIR O.
FIFTH INTERNATIONAL CONFERENCE ON ADVANCES INMECHANICAL ENGINEERING: ICAME 2019, İstanbul, Turkey, 17 - 19 December 2019, pp.1439-1449

BRIEF REVIEW OF ECM BASED HYBRID MANUFACTURING PROCESSES

Tetik A., ÇAKIR O.
FIFTH INTERNATIONAL CONFERENCE ON ADVANCES INMECHANICAL ENGINEERING: ICAME 2019, İstanbul, Turkey, 17 - 19 December 2019, pp.1839-1858

IMPROVING THE RF PERFORMANCE OF CERAMICS USING LASER ASSISTED MACHINING

Güngör E., Özbek E., Shukurov S., ÇAKIR O.
FIFTH INTERNATIONAL CONFERENCE ON ADVANCES INMECHANICAL ENGINEERING: ICAME 2019, İstanbul, Turkey, 17 - 19 December 2019, pp.1767-1772

INFLUENCES OF EDM PARAMETERS ON MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS

Erbul A., ÇAKIR O.
OF FIFTH INTERNATIONAL CONFERENCE ON ADVANCES INMECHANICAL ENGINEERING: ICAME 2019, İstanbul, Turkey, 17 - 19 December 2019, pp.1734-1742

Cutting Fluids on Machining and Environmental Issues-A Review

Kıyak M., Çakır O., Şahin İ.
5th International Conference on Computational and Experimental Science and Engineering (ICCESEN-2018), İstanbul, Turkey, 12 - 16 October 2018, pp.152-159

CHEMICAL MACHINING OF MAGNESIUM AND ITS ALLOYS – A REVIEW

ÇAKIR O.
ICAME 2018, 19 - 21 December 2018, vol.1

“THE EFFECTOF HIGH VOLUME AND HIGH SPEED MACHINING ON TOOL LIFE

ÇAVDAR K., ÖZSOY M., ÇAKIR O., ORAL A., ÇAKIR M. C.
ICAME 2018, 7 - 10 December 2018, vol.1, pp.1-6

INFLUENCES OF MACHINING PARAMETERS ON SURFACE ROUGHNESS AND HEAT AFFECTED ZONE IN WIRE ELECTRICAL DISCHARGE MACHINING OF DIE MATERIAL

ÇAKIR O., Çelik A., Çelik E.
9th International Congress on Machining UTIS 2018, 8 - 10 November 2018

CHEMICAL MACHINING OF MAGNESIUM ALLOY WITH HCl AND NaOH

Çakır O., Yıldırım C., Zeyneloğlu R., Kurt L.
9th International Congress on Machining, UTIS 2018, Antalya, Turkey, 8 - 10 November 2018, pp.265-270

Chemical Machining of AZ31B Magnesium Alloy

ÇAKIR O.
5th INTERNATIONAL CONFERENCE ON COMPUTATIONAL AND EXPERIMENTAL SCIENCE AND ENGINEERING (ICCESEN-2018), 12 - 16 October 2018

Environmental Progresses in Photochemical Machining

ÇAKIR O., KIYAK M., ŞAHİN İ.
5th International Conference on Computational and Experimental Science and Engineering (ICCESEN-2018), Antalya, Turkey, 12 October 2018, pp.526

Cutting Fluids in Machining and Environmental Issues -A Review

Kıyak M., Çakır O., Şahin İ.
5 th International Conference on Computational and Eperimental Science and Engineering (ICCESEN-2018), Antalya, Turkey, 12 - 16 October 2018, pp.152-159 Sustainable Development

STAMPING DIE PRODUCTION WITH WIRE ELECTRODISCHARGE MACHINING OF VANADIS 10 AND K390 TOOL STEEL

ÇAKIR O., Çelik A., Çelik E.
18th INTERNATIONAL CONFERENCE ON MACHINE DESIGN AND PRODUCTION, 3 - 06 July 2018

Chemical Machining of St37 Rod With FeCl3

ÇAKIR O.
APMAS 2018 8th INTERNATIONAL ADVANCES IN APPLIED PHYSICS & MATERIALS SCIENCE CONGRESS AND EXHIBITION, Muğla, Turkey, 24 April 2018, pp.1-4

Etchants For Chemical Machining of Aluminum and Its Alloys

ÇAKIR O.
APMAS 2018 8th INTERNATIONAL ADVANCES IN APPLIED PHYSICS & MATERIALS SCIENCE CONGRESS AND EXHIBITION, Muğla, Turkey, 24 April 2018, pp.1-4

ELECTRICAL DISCHARGE MACHINING OF INCONEL ALLOYS

ÇAKIR O., GÜRKAN D.
Third International Conference on Advances In Mechanical Engineering ICAME 2017, İstanbul, Turkey, 19 December 2017, vol.1, pp.702-708

INFLUENCE OF WIRE ELECTRICAL DISCHARGE MACHINING PARAMETERS ON WHITE LAYER FORMATION

ÇAKIR O., ÇELİK A. S.
Third International Conference on Advances In Mechanical Engineering ICAME 2017, İstanbul, Turkey, 19 December 2017, pp.697-701

CHEMICAL MACHINING OF STAINLESS STEELS

ÇAKIR O.
3rd CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2017 – ICAME2017, 19 - 21 December 2017

ALÜMİNYUM 7075 MALZEMESİNİN NaOH KİMYASAL AŞINDIRICI İLE İŞLENMESİNDE İŞLEME DERİNLİĞİ VE YÜZEY PÜRÜZLÜLÜĞÜNÜN İNCELENMESİ

ÇAKIR O.
8. ULUSLARARASI TALAŞLI İMALAT SEMPOZYUMU, Antalya, Turkey, 2 - 04 November 2017, pp.546-556 Sustainable Development

POM ve PE Polimer Malzemelerin Delinmesinde Yüzey Pürüzlülüğü

Çelikyay N. B., UYSAL A., ÇAKIR O.
8th International Symposium On Machining (UTIS 2017), Antalya, Turkey, 2 - 04 November 2017, pp.219-224

TEMPERATURE IMPACT IN CHEMICAL MACHINING

ÇAKIR O.
INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING, İstanbul, Turkey, 25 - 28 April 2017, pp.628-631

Internal cooling cutting technology in turning operations

ŞAHİN İ., KIYAK M., ÇAKIR O.
International Conference on Energy and Thermal Engineering, İstanbul, Turkey, 25 April 2017, pp.1-6

CHEMICAL MACHINING OF COPPER ZINC ALLOY WITH FeCl3 AND FeCl3 HCl

Çakır O.
7th INTERNATIONAL SYMPOSIUM ON MACHINING, İstanbul, Turkey, 3 - 05 November 2016, pp.452-459

HEATING TECHNIQUES IN HOT MACHINING

ÇAKIR O., ŞAHİN İ.
INTERNATIONAL CONFERENCE ON ADVANCES IN SCIENCE ICAS 2016, İstanbul, Turkey, 31 July - 02 September 2016, pp.238-246

APPLICATION OF WIPER INSERT IN CUTTING TOOL TECHNOLOGY

KIYAK M., ŞAHİN İ., ÇAKIR O.
INTERNATIONAL CONFERENCE ON ADVANCES IN SCIENCE ICAS 2016, İstanbul, Turkey, 31 August - 02 September 2016, pp.60-65

MACHINING OF HADFIELD STEEL : AN OVERVIEW

Çakır O.
2nd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Turkey, 13 - 15 May 2016, pp.227-232

CHEMICAL MACHINING OF CZ128 COPPER ALLOY

ÇAKIR O.
2nd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 01 May 2016, pp.404-407

ENVIRONMENTAL IMPROVEMENTS IN PHOTOCHEMICAL MACHINING

ÇAKIR O.
2nd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 01 May 2016, pp.542-547

304 VE 430 PASLANMAZ ÇELİKLERİN KİMYASAL İŞLENMESİ

Çakır O., Emiroğlu U.
6. Ulusal Talaşlı İmalat Sempozyumu (UTİS 2015), İstanbul, Turkey, 3 - 05 November 2016, pp.158-167

SİLİNDİRİK PARÇALARIN KİMYASAL İŞLENMESİ

ÇAKIR O.
01 October 2014

Yüksek Manganlı Çeliğin Kesici Ağzı Yuvarlatılmış Sert Metal Takımlar ile Ortogonal Tornalanmasında Takım Ömrü

Kiyak M., UYSAL A., ÇAKIR O., ALTAN E.
3. Ulusal Talaşlı İmalat Sempozyumu, Turkey, 4 - 05 October 2012, vol.1, pp.496-502

Frezeleme İşleminde Kesme ve İlerleme Hızlarının Yüzey Pürüzlülüğü Üzerine Etkilerinin İncelenmesi

Kiyak M., UYSAL A., ÇAKIR O.
The 15th International Conference on Machine Design and Production, 19 - 22 June 2012, vol.3, pp.1173-1181

Talaşlı İşlemede Gazların Kullanımı

ÇAKIR O., KIYAK M., ALTAN E.
13. Uluslararası Makine Tasarım ve İmalat Kongresi (UMTİK2008), İstanbul, Turkey, 3 - 05 September 2008, pp.1-12

Freze Takımı ile Silindirik Tornalama

KIYAK M., ÇAKIR O., ALTAN E.
13.Uluslararası Makine Tasarım ve İmalat Kongresi (UMTİK 2008), İstanbul, Turkey, 3 - 05 September 2008, pp.1-12

“%5 SiC-p metal matriksli kompozitin soğuk talaşlı işlenmesi

KILIÇKAP E., ÇAKIR O., İNAN A.
01 October 2004

Evaluation of tool path equation parameters for spur gear and development of CNC program for CNC milling machines

ÖZEL C., ÇAKIR O.
01 May 2004, pp.315-322

Investigation of tool wear and surface roughness in turning of metal matrix composites

KILIÇKAP E., ÇAKIR O., İNAN A.
01 May 2004, pp.55-59

Photochemical machining of copper and copper alloys

ÇAKIR O.
01 May 2004, pp.60-64

The influences of voltage, current and wire feed rate on surface roughness in the WEDM of AISI 8620 steel

ÖZEK C., KILIÇKAP E., ÇAKIR O.
01 May 2004, pp.136-140

Cutting Fluids

Çakır O.
3. GAP ve Sanayi Kongresi, Şanlıurfa, Turkey, 18 - 19 October 2003, pp.427-436

CVD ve PVD kaplama yöntemlerinin kesici takımlara uygulanması

KIYAK M., ÇAKIR O., ALTAN E.
II. Makina Tasarım Ve İmalat Teknolojileri Kongresi (MATİT 2003), Konya, Turkey, 26 September 2003, pp.115-124

Titanyum ve alaşımlarının talaşlı şekillendirilmesi

ÇAKIR O., KIYAK M., ALTAN E.
II. Makina Tasarım Ve İmalat Teknolojileri Kongresi (MATİT 2003), Konya, Turkey, 26 September 2003, pp.21-30

“%5 SiC-p metal matriksli kompozitin tornalanmasında takım aşınması ve yüzey pürüzlülüğünün incelenmesi

KILIÇKAP E., ÇAKIR O., İNAN A.
01 September 2003, pp.137 Sustainable Development

Su Jeti ile İşleme

ÇAKIR O., KIYAK M., ALTAN E.
Balıkesir Üniversitesi, IV. Mühendislik-Mimarlık Sempozyumu, Balıkesir, Turkey, 11 - 13 September 2002, pp.141-149

Yüksek hızlı talaşlı şekillendirme

ALTAN E., KIYAK M., ÇAKIR O.
4. Balıkesir Mühendislik-Mimarlık Sempozyumu, Balıkesir, Turkey, 11 September 2002, pp.151-163

Dış silindirik taşlamada işlem parametrelerinin yüzey pürüzlülüğüne etkisi

KIYAK M., ÇAKIR O., ALTAN E.
01 September 2002, pp.203-212

Metal matriksli kompozit malzemelerin talaşlı şekillendirilmesinde kullanılan kesici takımlar

KIYAK M., ÇAKIR O., ALTAN E.
the Fourth GAP Engineering Congress, (4.GAP Mühendislik Kongresi), Şanlıurfa, Turkey, 06 June 2002, vol.1, pp.242-248

Cryogenic machining: A review

ÇAKIR O., KIYAK M., ALTAN E.
the Fourth GAP Engineering Congress, (4.GAP Mühendislik Kongresi), Şanlıurfa, Turkey, 06 June 2002, vol.1, pp.277-284

Metallerin talaşlı şekillendirilmesinde yığma ağız oluşumu ve yüzey pürüzlülüğüne etkisi

ALTAN E., ÇAKIR O., KIYAK M.
01 June 2002, vol.1, pp.349-355

Metal matriksli kompozitlerin işlenebilirliği

ALTAN E., KIYAK M., ÇAKIR O.
01 May 2002, pp.341-348

Kimyasal işleme yöntemi

Çakır O.
II. Makina Malzemesi ve İmalat Teknolojisi Sempozyumu , Manisa, Turkey, 7 - 09 November 2001, pp.813

Metallerin soğuk talaşlı işlenmesi

ÇAKIR O., KILIÇKAP E.
Makina Tasarım Ve İmalat Teknolojileri Kongresi (MATİT 2001), Konya, Turkey, 02 November 2001, pp.279-286

Mikro işleme teknolojisi

ÇAKIR O.
Makina Tasarım Ve İmalat Teknolojileri Kongresi (MATİT 2001), Konya, Turkey, 02 November 2001, pp.287-294

C103 oksijensiz bakırın fotokimyasal işlenmesi

ÇAKIR O.
1. Makina Mühendisliği Kongresi, İstanbul, Turkey, 04 June 1197, pp.464-468

The effects of concentration, temperature and HCl additions on the photochemical machining of brass

ALLEN D. M., ÇAKIR O.
7 th International Machine Design and Production Conference, Ankara, Turkey, 11 September 1996, pp.191-199

Environmental aspects of regeneration waste metal etchants

ÇAKIR O., GÜNDOĞAN M.
1st Trabzon İnternational Energy and Environment Symposium, (TIEES-96), Trabzon, Turkey, 29 July 1996, pp.1143-1148

Total quality management philosophy in the environmental management

GÜNDOĞAN M., ÇAKIR O.
1st Trabzon İnternational Energy and Environment Symposium, (TIEES-96), Trabzon, Turkey, 29 July 1996, pp.1149-1154

Photochemical machining of brass with cupric chloride etchant and a technique for the partial recovery of dissolved zinc

ALLEN D. M., ÇAKIR O., WHITE H. A.
01 November 1995, pp.305-315

The effects of positive and negative rake angles on the tool life and surface roughness in the hot and conventional of high manganese steel

Çakır O., Altan E.
Materials Issues in Machining-II and The Physics of Machining Processes-II, , Michigan, United States Of America, 2 - 06 November 1994, pp.105-111 Creative Commons License

Photochemical machining of copper alloys using cupric chloride etchant

Allen D., Çakır O.
6 th International Machine Design and Production Conference, Ankara, Turkey, 21 September 1994, pp.357-365 Creative Commons License

Sertleştirilmiş yalın karbonlu çeliğin fotokimyasal işlenmesi

Çakır O., Altan E.
5. Ulusal Makina Tasarımı ve İmalat Kongresi, Ankara, Turkey, 16 September 1992, pp.607-615 Creative Commons License

Yüksek manganlı çeliklerin sıcak talaşlı işlenmesinde takım geometrisinin takım ömrüne etkisi

Altan E., Çakır O.
4. Ulusal Makina Tasarımı ve İmalat Kongresi, Ankara, Turkey, 19 September 1990, pp.333-340 Creative Commons License

Talaşlı imalat yöntemlerinin metal matriksli kompozitlere uygulanması

Kıyak M., Çakır O., Altan E.
11. Uluslararası Malzeme Konferansı, İstanbul, Turkey, 5 - 08 June 2002, pp.1-7

Geleneksel olmayan imalat yöntemlerinin metal matriksli kompozitlere uygulanması

Çakır O., Kıyak M., Altan E.
11. Uluslararası Malzeme Konferansı, İstanbul, Turkey, 5 - 08 June 2002, pp.1-6

Comparison of FeCl3 and CuCl2 in the photochemical machining of brass

Allen D. M., Çakır O.
ESDA 2002 (6th Biennial Conference on Engineering Systems Design and Analysis), İstanbul, Turkey, 8 - 11 July 2002, pp.1-7 Creative Commons License

Books & Book Chapters

ALIŞILAGELMEDİK TALAŞLI İMALAT VE ISIL ENERJİLİ KESME İŞLEMLERİ

ÇAKIR O.
in: MODERN İMALATIN PRENSİPLERİ, Mustafa YURDAKUL , Yusuf Tansel İÇ, Editor, NOBEL Akademik Yayıncılık, pp.618-644, 2015

Metrics

Publication

110

Citation (WoS)

881

H-Index (WoS)

9

Citation (Scopus)

1121

H-Index (Scopus)

9

Citation (Scholar)

568

H-Index (Scholar)

5

Project

2

Open Access

36
UN Sustainable Development Goals