Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 41

1. 3D Chinese lantern-type stability loss of a cylinder composed of functionally graded materials under axial compression

Yeşil Ü., Aylıkcı F., Yahnioğlu N.
Journal of Engineering Mathematics , cilt.152, sa.1, 2025 (SCI-Expanded) identifier

2. Free vibration of simply supported piezoelectric plates containing a cylindrical cavity

Yesil U. B., Yahnioglu N.
ARCHIVE OF APPLIED MECHANICS , cilt.92, sa.9, ss.2665-2678, 2022 (SCI-Expanded) identifier identifier

3. The Influence of Imperfect Contact Conditions between Layers of a Hollow Sandwich Sphere on its Natural Frequencies

Sevdimaliyev Y. M., Akbarov S., Yahnioğlu N.
MECHANICS OF COMPOSITE MATERIALS , cilt.56, ss.541-554, 2020 (SCI-Expanded) identifier identifier

4. 3D FEM Analysis of Buckling Delamination of a Piezoelectric Sandwich Rectangular Plate with Interface Edge Cracks

Aylıkcı F., Akbarov S., Yahnioğlu N.
MECHANICS OF COMPOSITE MATERIALS , cilt.55, sa.6, ss.797-810, 2020 (SCI-Expanded) Creative Commons License identifier identifier

5. ON THE NATURAL OSCILLATION OF AN INHOMOGENEOUSLY PRE-STRESSED MULTILAYERED HOLLOW SPHERE FILLED WITH A COMPRESSIBLE FLUID

Sevdimaliyev Y. M., Akbarov S., Guliyev H. H., Yahnioglu N.
APPLIED AND COMPUTATIONAL MATHEMATICS , cilt.19, sa.1, ss.132-146, 2020 (SCI-Expanded) identifier

6. Influence of prestress on the natural frequency of a fluid-filled FGM sphere

Akbarov S., Çilli A., Yahnioğlu N.
EMERGING MATERIALS RESEARCH , cilt.8, sa.4, ss.663-667, 2019 (SCI-Expanded) identifier identifier

7. Buckling delamination of a PZT/Metal/PZT sandwich rectangular thick plate containing interface inner band cracks

Aylıkcı F., Akbarov S., Yahnıoglu N.
COMPOSITE STRUCTURES , cilt.202, ss.9-16, 2018 (SCI-Expanded) Creative Commons License identifier identifier

8. The influence of initial stresses on energy release rate and total electro-mechanical potential energy for penny-shaped interface cracks in PZT/Elastic/PZT sandwich circular plate-disc

AKBAROV S., Cafarova F., YAHNİOĞLU N.
SMART STRUCTURES AND SYSTEMS , cilt.22, sa.3, ss.259-276, 2018 (SCI-Expanded) Creative Commons License identifier identifier

9. The Discrete-Analytical Solution Method for Investigation Dynamics of the Sphere with Inhomogeneous Initial Stresses

AKBAROV S., Guliyev H. H., Sevdimaliyev Y. M., YAHNİOĞLU N.
CMC-COMPUTERS MATERIALS & CONTINUA , cilt.55, sa.2, ss.359-380, 2018 (SCI-Expanded) Creative Commons License identifier identifier

10. Three-dimensional analysis of the natural vibration of the three-layered hollow sphere with middle layer made of FGM

AKBAROV S., GULIYEV H. H., YAHNİOĞLU N.
Structural Engineering and Mechanics , cilt.61, sa.5, ss.563-576, 2017 (SCI-Expanded) Creative Commons License identifier identifier

11. Buckling delamination of the PZT/Metal/PZT sandwich circular plate-disc with penny-shaped interface cracks

Cafarova F. I., AKBAROV S., YAHNİOĞLU N.
Smart Structures and Systems , cilt.19, sa.2, ss.163-179, 2017 (SCI-Expanded) identifier identifier

12. On the total electro-mechanical potential energy and energy release rate at the interface crack tips in an initially stressed sandwich plate-strip with piezoelectric face and elastic core layers

AKBAROV S., YAHNİOĞLU N.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , ss.119-130, 2016 (SCI-Expanded) identifier identifier

13. Natural vibration of the three-layered solid sphere with middle layer made of FGM: three-dimensional approach

AKBAROV S., Guliyev H. H., YAHNİOĞLU N.
STRUCTURAL ENGINEERING AND MECHANICS , cilt.57, sa.2, ss.239-263, 2016 (SCI-Expanded) identifier identifier

14. Predicting Epidemic Diseases using Mathematical Modelling of SIR

Ergen K., ÇİLLİ A., YAHNİOĞLU N.
ACTA PHYSICA POLONICA A , cilt.128, 2015 (SCI-Expanded) Creative Commons License Sürdürülebilir Kalkınma identifier identifier

15. A 3D FEM Analysis of Buckling Delamination of a Rectangular Plate with an Inner Rectangular Crack under a Biaxial Compressive Force

AKBAROV S., YAHNİOĞLU N., KARATAŞ E. E.
MECHANICS OF COMPOSITE MATERIALS , cilt.49, sa.6, ss.585-594, 2014 (SCI-Expanded) identifier identifier

16. Buckling Delamination of a Rectangular Viscoelastic Sandwich Plate Containing Interface Inner Cracks

Akbarov S., Yahnioğlu N., Tekin A.
JOURNAL OF ENGINEERING MECHANICS , cilt.140, sa.1, ss.134-148, 2014 (SCI-Expanded) Creative Commons License identifier identifier identifier

17. Buckling delamination of a rectangular sandwich plate containing inner cracks under biaxial loading

Akbarov S., Yahnioğlu N., Tekin A.
MECHANICS OF COMPOSITE MATERIALS , cilt.49, sa.5, ss.537-550, 2013 (SCI-Expanded) Creative Commons License identifier identifier

18. Buckling delamination of a sandwich plate-strip with piezoelectric face and elastic core layers

AKBAROV S., YAHNİOĞLU N.
APPLIED MATHEMATICAL MODELLING , cilt.37, ss.8029-8038, 2013 (SCI-Expanded) identifier identifier

19. A 3D FEM analysis of stress concentrations around two neighboring cylindrical holes in a prestressed rectangular composite plate under bending

AKBAROV S., YAHNİOĞLU N., YEŞİL Ü.
MECHANICS OF COMPOSITE MATERIALS , cilt.48, sa.5, ss.499-510, 2012 (SCI-Expanded) identifier identifier

20. 3D FEM Analysis of the Buckling Delamination of a Rectangular Viscoelastic Composite Plate with an Embedded Rectangular Crack Under Two-Axial Compression

AKBAROV S., YAHNİOĞLU N., KARATAŞ E. E.
CMC-COMPUTERS MATERIALS & CONTINUA , cilt.30, sa.1, ss.1-18, 2012 (SCI-Expanded) identifier identifier

21. Local Buckling Delamination of a Rectangular Sandwich Plate Containing Interface Embedded Rectangular Cracks and Made From Elastic and Viscoelastic Materials

Akbarov S., YAHNİOĞLU N., Tekin A.
CMC-COMPUTERS MATERIALS & CONTINUA , cilt.29, sa.1, ss.41-74, 2012 (SCI-Expanded) identifier identifier

22. 3D Analysis of the Forced Vibration of a Prestressed Rectangular Composite Plate With Two Neighboring Cylindrical Cavities

AKBAROV S., YAHNİOĞLU N., YEŞİL Ü.
CMC-COMPUTERS MATERIALS & CONTINUA , cilt.28, sa.2, ss.147-164, 2012 (SCI-Expanded) identifier identifier

23. Buckling delamination of a rectangular plate containing a rectangular crack and made from elastic and viscoelastic composite materials

AKBAROV S., YAHNİOĞLU N., KARATAŞ E. E.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES , cilt.47, ss.3426-3434, 2010 (SCI-Expanded) identifier identifier

24. DELAMINATION BUCKLING OF A RECTANGULAR ORTHOTROPIC COMPOSITE PLATE CONTAINING A BAND CRACK

AKBAROV S., YAHNİOĞLU N.
MECHANICS OF COMPOSITE MATERIALS , cilt.46, sa.5, ss.493-504, 2010 (SCI-Expanded) identifier identifier

25. FORCED VIBRATION OF AN INITIALLY STRESSED THICK RECTANGULAR PLATE MADE OF AN ORTHOTROPIC MATERIAL WITH A CYLINDRICAL HOLE

Akbarov S., Yahnioğlu N., Yeşil Ü.
MECHANICS OF COMPOSITE MATERIALS , cilt.46, ss.287-298, 2010 (SCI-Expanded) identifier identifier

26. 3D FEM Analyses of the Buckling Delamination of a Rectangular Sandwich Plate Containing Interface Rectangular Cracks and Made from Elastic and Viscoelastic Materials

Akbarov S., YAHNİOĞLU N., Tekin A.
CMES-COMPUTER MODELING IN ENGINEERING & SCIENCES , cilt.64, sa.2, ss.147-185, 2010 (SCI-Expanded) identifier identifier

27. Interaction between two neighboring circular holes in a prestretched simply supported orthotropic strip under bending

Akbarov S., Yahnioğlu N., Yeşil Ü.
MECHANICS OF COMPOSITE MATERIALS , cilt.44, ss.581-590, 2008 (SCI-Expanded) identifier identifier

28. On the stress distribution in the pre-stretched simply supported strip containing two neighbouring circular holes under forced vibration

YAHNİOĞLU N.
INTERNATIONAL APPLIED MECHANICS , cilt.43, sa.10, ss.1179-1183, 2007 (SCI-Expanded)

29. On the stress distribution in a prestretched simply supported strip containing two neighboring circular holes under forced vibration

YAHNİOĞLU N.
INTERNATIONAL APPLIED MECHANICS , cilt.43, sa.10, ss.1179-1183, 2007 (SCI-Expanded) identifier identifier

30. On the influence of the initial tension of a strip with a rectangular hole on the stress concentration caused by additional loading

Akbarov S., Yahnioglu N., Yucel A.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN , cilt.39, ss.615-624, 2004 (SCI-Expanded) identifier identifier

31. Influence of initial stresses on stress intensity factors at crack tips in a composite

AKBAROV S., YAHNİOĞLU N., TURAN DİNCEL A.
Mechanics Of Composite Materials , cilt.40, ss.299-308, 2004 (SCI-Expanded) identifier identifier

32. The loss of stability analyses of an elastic and viscoelastic composite circular plate in the framework of three-dimensional linearized theory

KÜTÜĞ Z., YAHNİOĞLU N., AKBAROV S.
European Journal of Mechanics, A/Solids , cilt.22, sa.3, ss.475-488, 2003 (SCI-Expanded) identifier identifier

33. Stability loss analyses of the elastic and viscoelastic composite rotating thick circular plate in the framework of the three-dimensional linearized theory of stability

YAHNİOĞLU N., AKBAROV S.
International Journal of Mechanical Sciences , cilt.44, sa.6, ss.1225-1244, 2002 (SCI-Expanded) identifier identifier

34. On the three-dimensional stability loss problem of the viscoelastic composite plate

Akbarov S., YAHNIOGLU N., KUTUG Z.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE , cilt.39, sa.13, ss.1443-1457, 2001 (SCI-Expanded) identifier identifier

35. A method of investigation of the general theory of stability problems on structural elements fabricated from viscoelastic composite materials

Akbarov S., YAHNIOGLU N.
COMPOSITES PART B-ENGINEERING , cilt.32, sa.5, ss.473-480, 2001 (SCI-Expanded) identifier identifier

36. Bending of a composite material strip with curved structure in the geometrically nonlinear statement

Yahnioglu N., Selim S.
MECHANICS OF COMPOSITE MATERIALS , cilt.36, sa.6, ss.459-464, 2000 (SCI-Expanded) identifier identifier

37. Mechanics of composite materials with curved structures and elements of constructions (review)

Akbarov S., GUZ' A., YAHNIOGLU N.
INTERNATIONAL APPLIED MECHANICS , cilt.34, sa.11, ss.1067-1078, 1998 (SCI-Expanded) identifier identifier

38. Influence of local structural damage in multilayered thick plate material on the stress distribution

Akbarov S., Yahnioglu N.
INTERNATIONAL APPLIED MECHANICS , cilt.34, sa.9, ss.873-877, 1998 (SCI-Expanded) identifier identifier

39. On the fracture of the unidirectional composites in compression

Akbarov S., Sisman T., Yahnioglu N.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE , cilt.35, ss.1115-1136, 1997 (SCI-Expanded) identifier identifier

40. Three-dimensional analysis of stress fields in the plates fabricated from composite materials with small-scale structural curving

Yahnioglu N.
MECHANICS OF COMPOSITE MATERIALS , cilt.33, sa.3, ss.239-245, 1997 (SCI-Expanded) identifier identifier

41. Stress distribution in a strip fabricated from a composite material with small-scale curved structure

Akbarov S., YAHNIOGLU N.
INTERNATIONAL APPLIED MECHANICS , cilt.32, sa.9, ss.684-690, 1996 (SCI-Expanded) identifier identifier
Diğer Dergilerde Yayınlanan Makaleler 13

1. PİEZOELEKTRİK SANDVİÇ DİKDÖRTGEN KALIN PLAĞIN DELAMİNASYON BURKULMA MODUNA ÇEŞİTLİ GEOMETRİK VE MALZEME PARAMETRELERİNİN ETKİSİ

AYLIKCI F., YAHNİOĞLU N.
Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , cilt.8, sa.3, ss.109-120, 2019 (Hakemli Dergi) Creative Commons License

2. PİEZOELEKTRİK PRİZMATİK DOLGU İÇEREN DİKDÖRTGEN KALIN PLAĞIN FEM İLE ELEKTRO-STATİK ANALİZİ

Yeşil Ü., Yahnioğlu N., Uçan Y.
Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , cilt.8, sa.3, ss.69-81, 2019 (Hakemli Dergi) Creative Commons License

3. Own Weight Effect on Static Analysis of Pre-Stretched Plate-Strip Containing Twin Circular Inclusions Under Bending

Yeşil Ü., Yahnioğlu N.
Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.19, sa.3, ss.902-913, 2019 (Hakemli Dergi)

4. The effect of crack size on the buckling delamination mode (surface wrinkles) of apiezoelectric sandwich rectangular thick plate with interface edge cracks

Aylıkcı F., Yahnioğlu N.
AIP CONFERENCE PROCEEDINGS , cilt.2042, ss.1-4, 2018 (Scopus) identifier identifier

5. FEM ANALYSIS OF THE INFLUENCE OF THE PLATE GEOMETRY ON THE BUCKLING DELAMINATION OF A PIEZOELECTRIC SANDWICH RECTANGULAR THICK PLATE

AYLIKCI F., YAHNİOĞLU N., ELİBOL A.
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.9, sa.2, ss.193-202, 2018 (ESCI) identifier

6. Stress Concentration In Two Neighbouring Circular Holes In a Composite Plate

Yeşil Ü., Yahnioğlu N.
Analele Universitatii din Oradea. Fascicola matematica , cilt.8, ss.261-272, 2006 (Hakemli Dergi)

7. Stress Concentration In Two Neighbouring Circular Holes In a Composite Plate

Yahnioglu N.
ANALELE, FASCICOLA MATEMATICA TOM XIII , cilt.8, sa.8, ss.261-272, 2006 (Hakemli Dergi)

8. Dolgu içeren şerit-levhanın eğilmesine geometrik non-lineeritenin etkisi

YAHNİOĞLU N., Agit H.
Sigma, Mühendislik ve Fen Bilimleri Dergisi , sa.2005, ss.67-78, 2005 (Hakemli Dergi)

9. Dikdörtgen delik içeren kompozit şerit-levhanın eğilmesinde yapıda oluşan gerilme yığılmalarına geometrik non-lineeritenin etkisi

YAHNİOĞLU N., Agit H.
Sigma, Mühendislik ve Fen Bilimleri Dergisi , sa.2005, ss.25-35, 2005 (Hakemli Dergi)

10. Influence of initial stresses on stress intensity factors at crack tips in a composite strip

Akbarov S., Yahnioglu N., Turan A.
Mekhanika Kompozitnykh Materialov , cilt.40, sa.4, ss.467-478, 2004 (Scopus) identifier identifier

11. Dikdörtgen Delik Formunda Dolgu Malzemesi İçeren Şerit-Levhada Gerilme Birikimi

Yahnioğlu N.
Y.T.Ü. Dergisi , 2002 (Hakemsiz Dergi)

12. The influence of the local structural damage of the multilayered thick plate material to the stress distribution

Akbarov S., Yahnioglu N.
Wuhan Daxue Xuebao (Xinxi Kexue Ban)/Geomatics and Information Science of Wuhan University , cilt.23, sa.4, ss.64-68, 1998 (Scopus) identifier

13. FEM analysis of the stress and displacement distribution in the cantilever pate fabricated from the composite material with small-scale periodically curved structure

YAHNİOĞLU N.
YTÜ Dergisi , ss.61-73, 1996 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 116

1. THE EFFECTS OF AN IMPERFECT CONTACT CONDITIONS ON THE HIGHER NATURAL FREQUENCIES OF A SANDWICH HOLLOW SPHERE UNDER TORSIONAL VIBRATION MODE

Yahnioğlu N., Sevdimaliyev Y.
7th International Conference on CONTROL AND OPTIMIZATION WITH INDUSTRIAL APPLICATIONS (COIA-2020), Baku, Azerbaycan, 26 - 28 Ağustos 2020, cilt.1, ss.410-412, (Özet Bildiri) Creative Commons License

2. The mode of the buckling delamination of the PZT/Metal/PZT sandwich rectangular plate with interface embedded rectangular cracks

Aylıkcı F., Yahnioğlu N., Akbarov S.
7th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2019), Girona, İspanya, 18 - 20 Eylül 2019, cilt.1, sa.1, ss.13-22, (Tam Metin Bildiri) Creative Commons License

3. PİEZOELEKTRİK SANDVİÇ DİKDÖRTGEN KALIN PLAĞIN DELAMİNASYON BURKULMA MODUNA ÇEŞİTLİ GEOMETRİK VE MALZEME PARAMETRELERİNİN ETKİSİ

AYLIKCI F., YAHNİOĞLU N.
21. ULUSAL MEKANİK KONGRESİ, Niğde, Türkiye, 2 - 06 Eylül 2019, cilt.1, ss.372-381, (Tam Metin Bildiri)

4. Piezoelektrik sandviç dikdörtgen kalın plağın delaminasyon burkulma moduna çeşitli geometrik ve malzeme parametrelerinin etkisi

Aylıkcı F., Yahnioğlu N.
Ulusal Mekanik Kongresi, Niğde, Türkiye, 2 - 06 Eylül 2019, cilt.1, ss.372-381, (Tam Metin Bildiri)

5. Piezoelektrik Prizmatik Dolgu İçeren Dikdörtgen Kalın Plağın FEM ile Analizi

Yeşil Ü., Yahnioğlu N., Uçan Y.
21. Ulusal Mekanik Kongresi,, Niğde, Türkiye, 2 - 06 Eylül 2019, cilt.1, ss.410-420, (Tam Metin Bildiri)

6. Piezoelektrik Prizmatik Dolgu İçeren Dikdörtgen Kalın Plağın FEM ile Analizi

Babuscu Yesil U., Yahnioğlu N., Ucan Y.
Ulusal Mekanik Kongresi, Niğde, Türkiye, 2 - 06 Eylül 2019, cilt.1, ss.410-420, (Tam Metin Bildiri)

7. İçi Boş Sandviç Kürenin Doğal Titreşim Frekanslarına Levhalar Arası Kusurlu Temas Koşullarının Etkisi

Sevdimaliyev Y., Akbarov S., Yahnioglu N.
Ulusal Mekanik Kongresi, Niğde, Türkiye, 2 - 06 Eylül 2019, cilt.1, ss.342-352, (Tam Metin Bildiri)

8. İçi Boş Sandviç Kürenin Doğal Titreşim Frekanslarına Levhalar Arası Kusurlu Temas Koşullarının Etkisi

Sevdimaliyev Y., Akbarov S., Yahnioğlu N.
Ulusal Mekanik Kongresi, Niğde, Türkiye, 2 - 06 Eylül 2019, cilt.1, ss.342-352, (Tam Metin Bildiri)

9. THE EFFECTS OF INHOMOGENEOUS INITIAL STRESSES ON THE OSCILLATION OF A MULTILAYERED HOLLOW SPHERE FILLED WITH A COMPRESSIBLE FLUID

Akbarov S., Yahnioğlu N., Guliyev H. H., Sedimaliyev Y.
International Conference on Applied Anaylsis and Mathematical Modeling, İstanbul, Türkiye, 10 - 13 Mart 2019, cilt.1, sa.1, ss.44, (Özet Bildiri) Sürdürülebilir Kalkınma

10. INFLUENCE OF THE INHOMOGENEOUS INITIAL STRESS ON THE NATURAL FREQUENCIES OF A FLUID-FILLED HOLLOW SPHERE MADE OF FGM

AKBAROV S., ÇİLLİ A., YAHNİOĞLU N.
5th International Conference on Computational and Experimental Science and Engineering (ICCESEN 2018), Antalya, Türkiye, 12 Ekim 2018, cilt.1, sa.1, ss.217, (Özet Bildiri)

11. THE EFFECT OF CRACK SIZE ON THE BUCKLING DELAMINATION MODE (SURFACE WRINKLES) OF A PIEZOELECTRIC SANDWICH RECTANGULAR THICK PLATE WITH INTERFACE EDGE CRACKS

AYLIKCI F., YAHNİOĞLU N.
TURKISH PHYSICAL SOCIETY 34TH INTERNATIONAL PHYSICS CONGRESS, Muğla, Türkiye, 05 Eylül 2018, cilt.1, sa.1, ss.61, (Özet Bildiri) Creative Commons License identifier identifier

12. THE EFFECT OF BOUNDARY CONDITIONS ON THE CRITICAL PARAMETERS IN THE BUCKLING DELAMINATION OF PZT/Metal/PZT SANDWICH RECTANGULAR THICK PLATE

AYLIKCI F., YAHNİOĞLU N., ELİBOL A.
7th International Eurasian Conference On Mathematical Sciences And Applications (IECMSA-2018), Kiev, Ukrayna, 28 Ağustos 2018, cilt.1, ss.1, (Özet Bildiri) Creative Commons License

13. EFFECTS OF THE MATERIAL CONSTANTS ON THE TORSIONAL VIBRATION OF A HOLLOW SPHERE WITH THE INHOMOGENEOUS INITIAL STRESSES

AKBAROV S., YAHNİOĞLU N., Guliyev H. H.
7TH INTERNATIONAL EURASIAN CONFERENCE ON MATHEMATICAL SCIENCES AND APPLICATIONS KYIV - UKRAINE, Kiev, Ukrayna, 28 Ağustos 2018, cilt.1, ss.1, (Özet Bildiri) Creative Commons License

14. 3D FEM analysis of a buckling delamination of a piezoelectric sandwich rectangular plate with interface edge cracks

AYLIKCI F., AKBAROV S., YAHNİOĞLU N.
4th International Conference on Mechanics of Composites, Madrid, İspanya, 09 Temmuz 2018, ss.50, (Özet Bildiri) Creative Commons License

15. FREE VIBRATION OF A FLUID-FILLED HOLLOW SPHERE WITH INHOMOGENEOUS INITIAL STRESS

AKBAROV S., YAHNİOĞLU N., Guliyev H. H.
International Conference on Innovations in Natural Science and Engineering (ICINSE 2018), Famagusta, Kıbrıs (Kktc), 03 Ocak 2018, cilt.1, sa.1, ss.3-4, (Özet Bildiri) Creative Commons License

16. Buckling delamination of a PZT/Metal/PZT sandwich rectangular thick plate with closed- circuit conditions

AYLIKCI F., YAHNİOĞLU N., AKBAROV S.
1st International Conference on Innovations in Natural Science and Engineering, Famagusta, Kıbrıs (Kktc), 03 Ocak 2018, ss.25, (Özet Bildiri) Creative Commons License

17. On one integral criterion of reliability of geoinformation

Guliyev H. H., AKBAROV S., YAHNİOĞLU N., Sevdimaliyev Y. M.
17th International Conference on Geoinformatics: Theoretical and Applied Aspects, Kyiv, Ukrayna, 14 - 17 Mayıs 2018, sa.1, (Tam Metin Bildiri) Creative Commons License identifier

18. Natural Vibration of a Multilayered Hollow Sphere Filled with a Compressible Fluid

AKBAROV S., YAHNİOĞLU N., Guliyev H. H.
34th International Physics Congress of the Turkish-Physical-Society (TPS), Konacik, Türkiye, 5 - 09 Eylül 2018, cilt.2042, (Tam Metin Bildiri) identifier identifier

19. ON THE DISCRETE-ANALYTICAL SOLUTION METHOD FOR INVESTIGATION DYNAMICAL PROBLEMS OF THE SPHERE WITH INHOMOGENEOUS INITIAL STRESSES

AKBAROV S., Guliyev H. H., YAHNİOĞLU N.
13th International Conference on Vibration Problems, Guwahati, Hindistan, 29 Kasım 2017, ss.1-15, (Tam Metin Bildiri) Creative Commons License

20. HOMOJEN OLMAYAN ÖNGERİLME İÇEREN İÇİ BOŞ KÜRENİN TORSİYONEL TİTREŞİMİ

AKBAROV S., YAHNİOĞLU N., Guliyev H. H.
XX. Ulusal Mekanik Kongresi, Bursa, Türkiye, 05 Eylül 2017, ss.1-6, (Tam Metin Bildiri)

21. PİEZOELEKTRİK SANDVİÇ DİKDÖRTGEN KALIN PLAĞIN DELAMİNASYON BURKULMASININ FEM İLE İNCELENMESİ

AYLIKCI F., YAHNİOĞLU N., ELİBOL A.
XX. Ulusal Mekanik Kongresi, Türkiye, 5 - 09 Eylül 2017, (Özet Bildiri)

22. İKİZ DAİRESEL DOLGU İÇEREN ÖNGERİLMELİ ŞERİT-PLAĞIN EĞİLMESİNE KENDİ AĞIRLIĞININ ETKİSİ

Yeşil Ü., Yahnıoglu N.
XX. Ulusal Mekanik Kongresi, Bursa, Türkiye, 5 - 09 Eylül 2017, ss.1-10, (Tam Metin Bildiri)

23. Buckling Delamination of a PZT/Metal/PZT sandwich rectangular thick plate containing interface inner band cracks

AYLIKCI F., AKBAROV S., YAHNİOĞLU N.
20th International Conference on Composite Structures (ICCS20), Paris, Fransa, 4 - 07 Eylül 2017, (Özet Bildiri)

24. 3D FEM Analysis of Buckling of a Piezoelectric Rectangular Thick Plate

YAHNİOĞLU N., AYLIKCI F.
6th International Eurasian Conference on Mathematical Sciences and Applications IECMSA-2017, Budapeşte, Macaristan, 15 Ağustos 2017, ss.155, (Özet Bildiri)

25. An Investigation on the Free Vibration of a Sphere with Inhomogeneous Initial Stresses

AKBAROV S., YAHNİOĞLU N., Guliyev H. H.
6th International Eurasian Conference on Mathematical Sciences and Applications (IECMSA-2017), Budapeşte, Macaristan, 15 Ağustos 2017, ss.175, (Özet Bildiri)

26. 3D FEM Analysis of Buckling Delamination of a Piezoelectric Rectangular Thick Plate

YAHNİOĞLU N., AYLIKCI F.
6th International Eurasian Conference on Mathematical Sciences and Applications (IECMSA 2017), Budapest, Macaristan, 15 - 18 Ağustos 2017, (Özet Bildiri)

27. Buckling delamination of the circular sandwich plate with piezoelectric face and elastic core layers under rotationally symmetric external pressure

AKBAROV S., Cafarova F. I., YAHNİOĞLU N.
Turkish Physical Society 32nd International Physics Congress, TPS 2016, Konacik-Bodrum, Türkiye, 6 - 09 Eylül 2016, cilt.1815, (Tam Metin Bildiri) identifier identifier

28. 3D analysis of the natural oscillation of the threelayered solid and hollow sphere with middle layer made of FGM

Guliyev H. H., YAHNİOĞLU N.
European Advanced Materials Congress 2016, 01 Ağustos 2016, (Tam Metin Bildiri)

29. FONKSİYONEL DERECELENDİRİLMİŞ MALZEMEDEN YAPILMIŞ İÇİ BOŞ ÜÇKATLI KÜRENİN TORSİYONEL SERBEST TİTREŞİMİNİN DİSKRİT-ANALİTİK YÖNTEMLE İNCELENMESİ

Quliyev H., Akbarov S., Yahnioğlu N.
XIX. ULUSAL MEKANİK KONGRESİ , Trabzon, Türkiye, 24 - 28 Ağustos 2015, cilt.1, sa.1, ss.826-837, (Tam Metin Bildiri) Creative Commons License

30. FONKSİYONEL DERECELENDİRİLMİŞ MALZEMEDEN YAPILMIŞ İÇİ BOŞ ÜÇKATLI KÜRENİN TORSİYONEL SERBEST TİTREŞİMİNİN DİSKRİT ANALİTİK YÖNTEMLE İNCELENMESİ

SURKHAY A., YAHNİOĞLU N.
XIX. ULUSAL MEKANİK KONGRESİ, Türkiye, 24 - 28 Ağustos 2015, (Tam Metin Bildiri)

31. Predicting Epidemic Diseases Using Mathematical Modelling of SIR

ERGEN K., ÇİLLİ A., YAHNİOĞLU N.
Internatinal Conference on Computational and Experimental Science and Engineering (ICCESEN), 25 - 29 Ekim 2014, ss.572, (Tam Metin Bildiri)

32. The total electro-mechanical potential energy at the interface crack tips in a sandwich plate-strip with piezoelectric face and elastic core layers

YAHNİOĞLU N.
Institude of Polymer Mechanics University of Latvia, 01 Haziran 2014, cilt.1, ss.192, (Tam Metin Bildiri)

33. PİEZOELEKTRİK MALZEMEDEN YAPILMIŞ SANDVİÇ PLAK ŞERİTİN DELAMİNASYON BURKULMASI

SURKHAY A., YAHNİOĞLU N.
XVIII. ULUSAL MEKANİK KONGRESİ, Türkiye, 26 - 30 Ağustos 2013, ss.31-42, (Tam Metin Bildiri)

34. Dış Katmanları Piezolektrik Orta Katmanı Elastik Olan Çekme Öngerilmeli Sandviç Şerit Plaktaki İç Çatlakların Ucunda Oluşan Enerji Salınım Oranı Ve Elektro Mekanik Potansiyel Enerji

AKBAROV S. D., YAHNİOĞLU N.
10th INTERNATIONAL FRACTURE CONFERENCE, 24 - 26 Nisan 2014, (Tam Metin Bildiri)

35. Piezoelektrik Malzemeden Yapılmış Plak Kirişin Eğilmesi Durumunda Yapıda Oluşan Gerilme Yayılımına Elektriksel Ve Mekaniksel Alanın Karşılıklı Etkisinin FEM İle İncelenmesi

YAHNİOĞLU N., DANABAŞ N. E.
18. Ulusal Mekanik Kongresi, Türkiye, 26 - 30 Ağustos 2013, (Tam Metin Bildiri)

36. Piezoelektrik Malzemeden Yapılmıs Sandviç Plak-Şeritin Delaminasyon Burkulması

YAHNİOĞLU N.
01 Ağustos 2013, cilt.1, (Tam Metin Bildiri)

37. Buckling delamination of rectangular sandwich plates containing inner cracks under bi axial loading

Surkhay A., Yahnioğlu N., Tekin A.
XVII. International Conference on Mechanics of Composite Materials, Riga, Letonya, 28 Mayıs - 01 Haziran 2012, (Özet Bildiri)

38. 3D Analyses of buckling delamination of a rectangular plate with an inner rectangular crack under biaxial compressive force

SURKHAY A., YAHNİOĞLU N., KARATAŞ E. E.
XVII. International Conference on Mechanics of Composite Materials, 28 Mayıs - 01 Haziran 2012, (Özet Bildiri)

39. 3D FEM analysis of stress concentrations around two neigboring cylindrical holes within a prestressed rectangular composite plate under bending

SURKHAY A., YAHNİOĞLU N., YEŞİL Ü.
XVII. International Conference on Mechanics of Composite Materials, 28 Mayıs - 01 Haziran 2012, (Özet Bildiri)

40. 3D Analysis of the Forced Vibration of a Pre-stressed Rectangular Composite Plate With Two Neighbouring Cylindrical Cavities

Akbarov S. D., Yahnioğlu N., Yeşil Ü.
International Conference on Computational and Experimental Engineering and Science (ICCES’ 12), Aharna, Yunanistan, 30 Nisan - 04 Mayıs 2012, ss.29, (Özet Bildiri)

41. Buckling delamination of a plate-strip with elastic core and piezoelectric face layers

YAHNİOĞLU N., Akbarov S. D.
International Conference on Computational&Experimental Engineering and Sciences (ICCES'12), 30 April-4 May 2012 Crete, Greece, 01 Mayıs 2012, (Tam Metin Bildiri)

42. 3D FEM analysis of the buckling delamination of a rectangular viscoelastic composite plate with an embedded rectangular crack under two axial compression

SURKHAY A., YAHNİOĞLU N., KARATAŞ E. E.
International Conference on Computational&Experimental Engineering and Sciences (ICCES'12), 30 Nisan - 04 Mayıs 2012, (Tam Metin Bildiri)

43. 3D Analysis of the forced vibration of a prestressed rectangular composite plate with two neighboring cylindrical cavities

SURKHAY A., YAHNİOĞLU N., YEŞİL Ü.
International Conference on Computational&Experimental Engineering and Sciences (ICCES'12), 30 Nisan - 04 Mayıs 2012, (Tam Metin Bildiri)

44. Buckling Delamination of a Sandwich Plate-Strip with Elastic Core and Piezoelectric face Layers

AKBAROV S., Yahnioglu N.
01 Nisan 2012, ss.46, (Tam Metin Bildiri)

45. Buckling delamination of rectangular viscoelastic sandwich plates containing inner cracks

Akbarov S., Yahnioğlu N., Tekin A.
9th International Fracture Conference, 19-21 October 2011 Yildiz Technical Uni, Istanbul, Turkey, İstanbul, Türkiye, 19 - 21 Ekim 2011, ss.45-55, (Tam Metin Bildiri)

46. Buckling delamination of a plate strip made from piezoelectric material

SURKHAY A., YAHNİOĞLU N.
9th International Fracture Conference, 19 - 21 Ekim 2011, (Tam Metin Bildiri)

47. İç Çatlaklar içeren İçeren Sandviç Plağın Delaminasyon Burkulma Probleminin FEM ile İncelenmesi

Tekin A., Yahnioğlu N.
XVII. Ulusal Mekanik Kongresi, Elazığ, Türkiye, 5 - 09 Eylül 2011, ss.659-668, (Tam Metin Bildiri)

48. İç Çalak İçeren Viskoelastik Dikdörtgen Plağın Delaminasyon Burkulması

KARATAŞ E. E., YAHNİOĞLU N.
XVII. Ulusal Mekanik Kongresi, Türkiye, 5 - 09 Eylül 2011, (Tam Metin Bildiri)

49. İki Silindirik Boşluk İçeren Öngerilmeli Kompozit Plağın Eğilmesi Durumunda Boşluklar Civarında Oluşan Gerilme Yığılmasının FEM ile İncelenmesi

YEŞİL Ü., YAHNİOĞLU N.
XVII. Ulusal Mekanik Kongresi, Türkiye, 5 - 09 Eylül 2011, (Tam Metin Bildiri)

50. Natural vibration of an initial stressed rectangular composite thick plate with two neighboring oval cylindrical holes

YAHNİOĞLU N., Babuscu Yesil U.
10th International Conference on Vibration Problems, 05-08 September 2011, Prague, Czech Republic, 01 Eylül 2011, (Tam Metin Bildiri)

51. Natural Vibration of an Initial Stressed Rectangular Composite Thick Plate with Two Neighboring Oval Cylindrical Holes

AKBAROV S., YAHNİOĞLU N., YEŞİL Ü.
10th Biennial International Conference on Vibration Problems (ICOVP), Prague, Çek Cumhuriyeti, 5 - 08 Eylül 2011, ss.162-167, (Tam Metin Bildiri) identifier

52. Buckling delamination of the rectangular orthotropic thick plate with an edge rectangular crack

Akbarov S., YAHNİOĞLU N., KARATAŞ E. E.
ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010, İstanbul, Türkiye, 12 - 14 Temmuz 2010, cilt.2, ss.193-200, (Tam Metin Bildiri) identifier

53. Buckling delamination of a rectangular sandwich thick plate with band cracks

Akbarov S., YAHNİOĞLU N., Tekin A.
ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010, İstanbul, Türkiye, 12 - 14 Temmuz 2010, cilt.2, ss.243-251, (Tam Metin Bildiri) identifier

54. Concentration of stress around the cylindrical hole in an initial stressed rectangular orthotropic thick plate

YAHNİOĞLU N., Yesil U. B.
ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, ESDA2010, İstanbul, Türkiye, 12 - 14 Temmuz 2010, cilt.4, ss.123-129, (Tam Metin Bildiri) identifier identifier

55. An analysis of buckling delamination of composite rectangular thick plates with an inner rectangular Crack

YAHNİOĞLU N., Karatas E. E.
The Tenth International Conference on Computational Structures Technology (CST2010) 14-17 September 2010 Valencia, Spain, 01 Eylül 2010, (Tam Metin Bildiri)

56. Buckling Delamination Of The Rectangular Orthotropic Thick Plate With An Edge Rectangular Crack

SURKHAY A., YAHNİOĞLU N., KARATAŞ E. E.
Asme2010 International Mechanical Engineering Congress And Exposition, 12 - 14 Temmuz 2010, (Tam Metin Bildiri) identifier

57. Buckling Delamination Of A Rectangular Sandwich Thick Plate With Band Cracks

SURKHAY A., YAHNİOĞLU N., KARATAŞ E. E.
ASME2010 International Mechanical Engineering Congress and Exposition, 12 - 14 Temmuz 2010, (Tam Metin Bildiri) identifier

58. Concentration Of Stress Around The Cylindrical Hole In An Initial Stressed Rectangular Orthotropic Thick Plate (ESDA2010-24698)

YAHNİOĞLU N., Babuscu Yesil U.
ASME2010 International Mechanical Engineering Congress and Exposition, July 12-14, 2010, Istanbul, Turkey, 01 Temmuz 2010, (Tam Metin Bildiri)

59. Buckling Delamination Of The Rectangular Orthotropic Thick Plate With An Edge Rectangular Crack (ESDA2010-24705)

YAHNİOĞLU N., Karatas E. E.
Asme2010 International Mechanical Engineering Congress And Exposition, July 12-14, 2010, Istanbul, Turkey, 01 Temmuz 2010, (Tam Metin Bildiri)

60. Concentration of Stress Around The Cylindrical Hole In an Initial Stressed Rectangular Orthotropic Thick Plate

Yahnioglu N.
ASME 2010 International Mechanical Engineering Congress and Exposition, 01 Temmuz 2010, (Tam Metin Bildiri)

61. Forced Vibration Of An Initial Stressed Rectangular Thick Plate Made From Orthotropic Material With A Cylindrical Hole

Akbarov S. D., Yahnioğlu N., Yeşil Ü.
Sixteenth International Conference on Mechanics of Composite Materials (MCM 2010), Riga, Letonya, 24 - 28 Mayıs 2010, ss.26, (Özet Bildiri)

62. Forced Vibration Of An Initial Stressed Rectangular Thick Plate Made From Orthotropic Material With A Cylindrical Hole

SURKHAY A., YAHNİOĞLU N., YEŞİL Ü.
Sixteenth International Conference on Mechanics of Composite Materials (MCM 2010), 24 - 28 Mayıs 2010, (Özet Bildiri)

63. Forced Vibration Of An Initial Stressed Rectangular Thick Plate Made From Orthotropic Material With A Cylindrical Hole

YAHNİOĞLU N., Babuscu Yesil U.
Sixteenth International Conference on Mechanics of Composite Materials (MCM 2010), May 24-28, 2010, Riga-Letonya, 01 Mayıs 2010, (Tam Metin Bildiri)

64. BUCKLING DELAMINATION OF THE RECTANGULAR ORTHOTROPIC THICK PLATE WITH AN EDGE RECTANGULAR CRACK

Akbarov S., Yahnioglu N., Karatas E. E.
10th ASME Biennial Conference on Engineering Systems Design and Analysis, İstanbul, Türkiye, 12 - 24 Temmuz 2010, ss.193-200, (Tam Metin Bildiri) identifier identifier

65. BUCKLING DELAMINATION OF A RECTANGULAR SANDWICH THICK PLATE WITH BAND CRACKS

Akbarov S., Yahnioglu N., Tekin A.
10th ASME Biennial Conference on Engineering Systems Design and Analysis, İstanbul, Türkiye, 12 - 24 Temmuz 2010, ss.243-251, (Tam Metin Bildiri) identifier identifier

66. An Analysis of Buckling Delamination of Composite Rectangular Thick Plates with an Inner Rectangular Crack

AKBAROV S., YAHNİOĞLU N., KARATAŞ E. E.
10th International Conference on Computational Structures Technology, Valencia, İspanya, 14 - 17 Eylül 2010, cilt.93, (Tam Metin Bildiri) identifier identifier

67. An analysis of buckling delamination of composite rectangular thick plates with an inner rectangular crack

AKBAROV S., YAHNİOĞLU N., KARATAŞ E. E.
10th International Conference on Computational Structures Technology, CST 2010, Valencia, İspanya, 14 - 17 Eylül 2010, cilt.93, (Tam Metin Bildiri) identifier

68. Forced vibration of an initial stressed rectangular composite thick plate with a cylindrical hole

YAHNİOĞLU N., Yesil U. B.
2009 ASME International Mechanical Engineering Congress and Exposition, IMECE2009, Lake Buena Vista, FL, Amerika Birleşik Devletleri, 13 - 19 Kasım 2009, cilt.15, ss.337-343, (Tam Metin Bildiri) identifier

69. FORCED VIBRATION OF AN INITIAL STRESSED RECTANGULAR COMPOSITE THICK PLATE WITH A CYLINDRICAL HOLE

YAHNİOĞLU N., Yesil U. B.
ASME International Mechanical Engineering Congress and Exposition, Florida, Amerika Birleşik Devletleri, 13 - 19 Kasım 2009, ss.337-343, (Tam Metin Bildiri) identifier

70. Buckling Delamination of the Viscoelastik Rectangular Thick Plate with a Edge Rectangular Crack

YAHNİOĞLU N., Karatas E. E.
ASME 2009 International Mechanical Engineering Congress and Exposition (IMECE09), November 13-19, 2009, Lake Buena Vista, Florida, USA, 01 Kasım 2009, (Tam Metin Bildiri)

71. Forced Vibration of an Initial Stressed Rectangular Composite Thick Plate With a Cylindrical Hole

YAHNİOĞLU N., Babuscu Yesil U.
01 Kasım 2009, (Tam Metin Bildiri)

72. Silindirik Boşluk İçeren Anizotrop Kalın Plağın Doğal Titreşimine Öngerilmenin Etkisi

Yahnioğlu N., Yeşil Ü.
XVI. Ulusal Mekanik Kongresi, Kayseri, Türkiye, 22 - 26 Haziran 2009, ss.1071-1080, (Tam Metin Bildiri)

73. Silindirik Boşluk İçeren Anizotrop Kalın Plağın Doğal Titreşimine Öngerilmenin Etkisi

YAHNİOĞLU N., YEŞİL Ü.
XVI. Ulusal Mekanik Kongresi, Türkiye, 22 - 26 Haziran 2009, (Tam Metin Bildiri)

74. Kenar Çatlağı İçeren Anizotrop Dikdörtgen Kalın Plağın Delaminasyonu

YAHNİOĞLU N., Karatas E. E.
XVI. Ulusal Mekanik Kongresi, 22-26 Haziran 2009, Erciyes Üniversitesi, Kayseri, 01 Haziran 2009, (Tam Metin Bildiri)

75. Silindirik Boşluk İçeren Anizotrop Kalın Plağın Doğal Titreşimine Öngerilmenin Etkisi

YAHNİOĞLU N., Babuscu Yesil U.
XVI. Ulusal Mekanik Kongresi, 22-26 Haziran 2009, Erciyes Üniversitesi, Kayseri, 01 Haziran 2009, (Tam Metin Bildiri)

76. Öngerilmeli Şerit-Plağın Eğilmesi Durumunda İçerdiği Dairesel Dolgular Arasındaki Karşılıklı Etki

YAHNİOĞLU N., Babuscu Yesil U.
XV. Ulusal Mekanik Kongresi, 03-07 Eylül 2007, Süleyman Demirel Üniversitesi, Isparta, 01 Eylül 2008, (Tam Metin Bildiri)

77. Inretaction Between Two Neighbouring Circular Holes In a Pre-Stretched Simply Supported Orthotropic Strip In Bending

Akbarov S. D., Yahnioğlu N., Yeşil Ü.
Fifteenth International Conference Mechanics of Composite Materials, Riga, Letonya, 26 - 30 Mayıs 2008, ss.14, (Özet Bildiri)

78. Delamination buckling of a rectangular composite orthotropic plate containing a band crack

SURKHAY A., YAHNİOĞLU N.
Fifteenth International Conference on Mechanics of Composite Materials (MCM2008), 26 - 30 Mayıs 2008, (Özet Bildiri)

79. Interraction between two neigbouring circular holes in a prestreched simply supported orthotropic strip under bending

SURKHAY A., YAHNİOĞLU N., YEŞİL Ü.
Fifteenth International Conference on Mechanics of Composite Materials (MCM2008), 26 - 30 Mayıs 2008, (Özet Bildiri)

80. The delamination buckling of the elastic and viscoelastic rectangular composite plate containing a band-crack

YAHNİOĞLU N., Rzayev O.
8th International Fracture Conference, 07-09 November 2007 Yildiz Technical University-Istanbul, 01 Kasım 2007, (Tam Metin Bildiri)

81. Öngerilmeli Şerit Plağın Eğilmesi Durumunda İçerdiği Dairesel Dolgular Arasındaki Karşılıklı Etki

YAHNİOĞLU N., YEŞİL Ü.
XV. Ulusal Mekanik Kongresi, Türkiye, 3 - 07 Eylül 2007, (Tam Metin Bildiri)

82. Interaction Between Two Neighbouring Circular Holes In Pre-Stretched Simply- Supported Composite Strip Under Bending

Yahnioğlu N., Yeşil Ü., Akat E.
International Joint Conference on Knowledge Management for Composite Materials, Dortmund, Almanya, 3 - 06 Temmuz 2007, (Tam Metin Bildiri)

83. Interaction Between Two Neighboring Circular Holes In Pre-Stretched Simply-Supported Composite Strip Under Bending

YAHNİOĞLU N., Babuscu Yesil U., Akat E.
International Joint Conference on Knowledge Management for Composite Materials, 03-06 July 2007, Dortmund, Germany, 01 Temmuz 2007, (Tam Metin Bildiri)

84. Forced vibration of the pre-stretched simply supported strip containing two neighbouring circular holes

YAHNİOĞLU N., AKBAROV S.
7th International Conference on Vibration Problems (ICOVP 2005), İstanbul, Türkiye, 5 - 09 Eylül 2005, cilt.111, ss.511-513, (Tam Metin Bildiri) identifier

85. Forced vibration of the pre stretched simply supported strip containing two neighbouring circular holes

SURKHAY A., YAHNİOĞLU N.
The Seventh International Conference on Vibration Problems (ICOVP-2005, 5 - 09 Eylül 2005, (Tam Metin Bildiri)

86. Stress Concentration in Two Neighbouring Circular Holes In a Composite Plate

Yahnioğlu N., Yeşil Ü.
Several aspects of biology, chemistry, computer science, mathematics and physics an International Conference, Oradea, Romanya, 11 - 13 Kasım 2005, ss.29-30, (Özet Bildiri)

87. Dairesel İki Delik İçeren Ortotrop Şerit-Levhanın Kenarlarından Çekilmesi Durumunda Delikler Civarında Oluşan Gerilme Birikimi

Yahnioğlu N., Yeşil Ü.
XIV. Ulusal Mekanik Kongresi, Hatay, Türkiye, 12 - 16 Eylül 2005, ss.829-838, (Tam Metin Bildiri)

88. Dairesel İki Delik İçeren Ortotrop Şerit-Levhanin Kenarlarindan Çekilmesi Durumunda Delikler Civarında Oluşan Gerilme Birikimi

YAHNİOĞLU N., Babuscu Yesil U.
XIV Ulusal Mekanik Kongresi, Antakya, 12-16 Eylül 2005, 01 Eylül 2005, (Tam Metin Bildiri)

89. Influence of Initial Stresses on Stress Intensity Factors at Crack Tips in a Composite Strip

AKBAROV S., YAHNİOĞLU N., TURAN DİNCEL A.
Thirteenth International Conference, Mechanics of Composite Materials, Letonya, 16 - 20 Mayıs 2004, (Özet Bildiri) identifier identifier

90. Influence of initial stresses on the stress intencity factor at crack tips in a composite strip

YAHNİOĞLU N., Turan A.
Thirteenth International Conference on Mechanics of Composite Materials (MCM2004), Letonya-Riga, May 16-20, 2004, 01 Mayıs 2004, (Tam Metin Bildiri)

91. On the Determination of the SIF at the Macro-Crack Tips in the Pre-stretched Anisotrop Strip

YAHNİOĞLU N., TURAN DİNCEL A.
6th International Fracture Conference, Konya, Türkiye, 10 Eylül 2003, ss.20-24, (Tam Metin Bildiri)

92. On the influence of the initial tension of the strip with rectangular hole to the stress concentration caused by additional loading

Surkhay A., Yahnioğlu N., Mermer Yücel A.
Proceedings of The 6th International Fracture Conference, Konya, Türkiye, 10 - 12 Eylül 2003, ss.3-10, (Tam Metin Bildiri)

93. Dikdörtgen dolgu malzemesi içeren öngerilmeli şeritte ilave yükten dolayı oluşan gerilme yığılmasına öngerilmenin etkisi

Yahnioğlu N., Mermer Yücel A.
XIII. Ulusal Mekanik Konferansı, Gaziantep, Türkiye, 8 - 12 Eylül 2003, ss.787-795, (Tam Metin Bildiri)

94. Çatlak İçeren Öngerilmeli Şeritte Gerilme Birikimi Şiddeti Faktörüne Öngerilmenin Etkisi

YAHNİOĞLU N., TURAN DİNCEL A.
XII. Ulusal Mekanik Kongresi, Türkiye, 8 - 12 Eylül 2003, (Tam Metin Bildiri)

95. Çatlak içeren öngerilmeli şeritte gerilme birikimi şiddeti faktörüne öngerilmenin etkisi

YAHNİOĞLU N., Turan A.
13. Ulusal Mekanik Konferansı 8-12 Eylül 2003 Gaziantep Üniversitesi-Gaziantep, 2003, 01 Eylül 2003, (Tam Metin Bildiri)

96. Dikdörtgen Dolgu Malzemesi İçeren Öngerilmeli Şeritte İlave Yükten Dolayı Oluşan Gerilme Yığılmasına Öngerilmenin Etkisi

Yahnioğlu N.
8-12 Eylül, 01 Eylül 2003, ss.787-795, (Tam Metin Bildiri)

97. On the influence of the initial tension of the strip with rectangular hole to the stress concentration

AKBAROV S., Yahnioglu N., Mermer Yucel A.
01 Eylül 2003, ss.3-10, (Tam Metin Bildiri)

98. Eğrisel yapıya sahip çokkatlı kompozit malzemeden hazırlanmış dairesel plağın zorlama titreşimindeki gerilme yayılımı

YAHNİOĞLU N.
XII. Ulusal Mekanik Kongresi, Türkiye, 10 - 14 Eylül 2001, (Tam Metin Bildiri)

99. Kare delik içeren çok katlı kompozit malzemeden oluşan şerit plaktaki gerilme dağılımı

Yahnioğlu N., Mermer A.
XII. Ulusal Mekanik Kongresi, Konya, Türkiye, 10 - 14 Eylül 2001, ss.853-859, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

100. Kare Delik İçeren Çokkatlı Kompozit Malzemeden Oluşan Şerit-Plaktaki Gerilme Dağılımı

Yahnioğlu N.
01 Eylül 2001, ss.853-859, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

101. On the unnecessity to the singular finite elements in the delamination problems

Akbarov S., Yahnioğlu N., Rzayev O.
6th International Fracture Conference, 10-12 September 2003 Selcuk University-Konya, İstanbul, Türkiye, 10 - 12 Eylül 2003, ss.1-10, (Tam Metin Bildiri)

102. Stability of viscoelastic circular plate

YAHNİOĞLU N.
ICCE/7, Seventh Annual International Conference on Composites Engineering, 2 - 08 Temmuz 2000, ss.949-950, (Özet Bildiri)

103. On the delamination of the unidirectional viscoelastic composite materials

Rzayev O., YAHNİOĞLU N.
4. Ulusal Kırılma Mekaniği Konferansı, 18-20 Ekim 1999 Y.T.Ü, İstanbul, 01 Ekim 1999, (Tam Metin Bildiri)

104. The method for investigation of the general theory of stability problems of structural elements fabricated from the viscoelastic composite materials

SURKHAY A., YAHNİOĞLU N.
Sixth Annual International Conference On Composites Engineering (ICCE/6), 27 Haziran - 03 Temmuz 1999, (Tam Metin Bildiri)

105. Geometrical Non-Linear Bending Problems of The Strip Fabricated From The Multilayered Composite Material With Periodically Curved Structures

Yahnioğlu N., Selim S.
2nd Pacific-Asia Conference On Mechanical Engineering, September 9-11, 1998 Manila Philippines, Manila, Filipinler, 9 - 11 Eylül 1998, ss.1, (Tam Metin Bildiri)

106. The stability loss of the strip fabricated from the composite material with pariodically curved structure

Yahnioğlu N., Selim S.
Ninth International Symposium on Continuun Models and Discrete Systems (CMDS9 ), İstanbul, Türkiye, 29 Haziran - 03 Temmuz 1998, ss.832-835, (Tam Metin Bildiri)

107. On the finite element analysis of the influence of the local structural damage of the multilayered thich plate material to the stress distribution

SURKHAY A., YAHNİOĞLU N.
Damage and Fracture Mechanics, 8 - 10 Haziran 1998, (Tam Metin Bildiri)

108. The Stability Loss of the Strip Fabricated From the Multilayered Composite Material with Periodically Curved Structure

Yahnioğlu N.
The Ninth International Symposium on Continuum Models and Discrete Systems, 01 Haziran 1998, (Tam Metin Bildiri)

109. On the finite element analysis of the influence of the local structural damage of the multilayered thick plate material to the stress distribution

Akbarov S., Yahnioglu N.
5th International Conference on Computer Aided Assessment and Control of Localized Damage and Fracture Mechanics, Bologna, İtalya, 01 Ocak 1998, ss.187-196, (Tam Metin Bildiri) identifier identifier

110. Homojen Olmayan Anizotrop Malzemeden Yapılmış Şerit İçin Bir Geometrik Non-Lineer Problemin İncelenmesi

Yahnioğlu N., Selim S.
X. Ulusal Mekanik Kongresi, İstanbul, Türkiye, 15 - 19 Eylül 1997, ss.443-452, (Tam Metin Bildiri)

111. Bor ve cam takviyeli kompozit malzemeden hazırlanmış şeritin zorlanmış titreşimlerine şerit malzemesi yapısındaki hasar parametrelerinin etkisi

YAHNİOĞLU N., Kutug Z.
Savunma Sanayiindeki Teknolojik Gelişmeler Sempozyumu, 5-6 Haziran 1997, Ankara, 01 Haziran 1997, (Tam Metin Bildiri)

112. Çok katlı malzemeden hazırlanmış kalın plak için malzeme hasar parametrelerinin gerilme dağılımına olan etkisinin FEM ile araştırılması

SURKHAY A., YAHNİOĞLU N.
II. Ulusal Hesaplamalı Mekanik Kongresi, Türkiye, 4 - 06 Eylül 1996, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

113. Sürekli homojen olmayan anizotrop cisimlerin elastisite teorisinin üç boyutlu sınırdeğer problemlerinin sayısal çözülmesinde sınır tabakası tipinde yaklaşım

Sisman T., YAHNİOĞLU N.
01 Eylül 1996, (Tam Metin Bildiri)

114. On the fracture of the unidirectional composites in compression

SURKHAY A., ŞİŞMAN T. T., YAHNİOĞLU N.
Third International Conference On Composites Engineering, ICCE/3, 21 - 26 Temmuz 1996, (Tam Metin Bildiri)

115. Bir ucu rijid tutturulmuş eğrisel yapıya sahip kompozit malzemeden hazırlanmış şeritin eğilmesinin FEM ile araştırılması

YAHNİOĞLU N.
01 Kasım 1995, (Tam Metin Bildiri)

116. Eğrisel yapıya sahip kompozit malzemeden hazırlanmış şeritin gerilme durumunun FEM ile araştırılması

SURKHAY A., YAHNİOĞLU N.
IX. Ulusal Mekanik Kongresi, Türkiye, 4 - 08 Eylül 1995, (Tam Metin Bildiri)
Metrikler

Yayın

176

Yayın (WoS)

54

Yayın (Scopus)

58

Atıf (WoS)

310

H-İndeks (WoS)

10

Atıf (Scopus)

417

H-İndeks (Scopus)

12

Atıf (Scholar)

30

H-İndeks (Scholar)

3

Atıf (Diğer Toplam)

3

Toplam Atıf Sayısı

313

Proje

10

Tez Danışmanlığı

9

Açık Erişim

14
BM Sürdürülebilir Kalkınma Amaçları