Prof. Dr. Hasan SADIKOĞLU

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Higher heating value estimation of wastes and fuels from ultimate and proximate analysis by using artificial neural networks

İnsel M. A., Yucel O., Sadikoglu H.

Waste Management , cilt.185, ss.33-42, 2024 (SCI-Expanded) Sürdürülebilir Kalkınma

Optimizing waste-to-energy conversion: Unveiling the potential of unsupervised clustering through the new HOM classification system

İnsel M. A., Yucel O., Sadıkoğlu H.

Sustainable Energy Technologies and Assessments , cilt.65, 2024 (SCI-Expanded)

Preparation and characterization of poly(lactic acid)-based contact-active antimicrobial surfaces

Aynali F., DOĞANCI E., Balci H., Cetin M., Ozkoc G., SADIKOĞLU H.

Journal of Coatings Technology and Research , cilt.20, sa.4, ss.1459-1475, 2023 (SCI-Expanded)

Effects of Xanthan Gum Addition and Extrusion Parameters on Properties of Starch-Based Fried Corn Extrudates

Gümüşay Ö. A., Sadıkoğlu H., Şeker M.

STARCH/STAERKE , cilt.1, sa.1, ss.1-16, 2023 (SCI-Expanded)

A comparison of machine learning algorithms for estimation of higher heating values of biomass and fossil fuels from ultimate analysis

Yaka H., İnsel M. A., Yucel O., Sadıkoğlu H.

Fuel , cilt.320, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

Computational modeling and experimental verification of cathode catalyst layer on PEM fuel cells

Kil Ş., Özdemir O. K., İnsel M. A., Sadıkoğlu H.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.47, sa.62, ss.26665-26672, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

Effect of grape derivatives and cross-linked maize starch coatings on the storage life of strawberry fruit

Yildirim-Yalcin M., Seker M., Sadikoglu H.

PROGRESS IN ORGANIC COATINGS , cilt.167, 2022 (SCI-Expanded)

Technical and economic analysis of biogas and solar photovoltaic (PV) hybrid renewable energy system for dairy cattle barns

Kırım Y., Sadıkoğlu H., Melikoğlu M.

RENEWABLE ENERGY , cilt.188, ss.873-889, 2022 (SCI-Expanded) Sürdürülebilir Kalkınma

OPTIMIZATION OF MEGAKARYOCYTE TRAPPING FOR PLATELET FORMATION IN MICROCHANNELS

Baydar Atak G., Insel M. A., Oruc M. E., Sadıkoğlu H.

CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY , cilt.28, sa.1, ss.19-28, 2022 (SCI-Expanded)

Optimization of mechanical and antioxidant properties of edible film based on grape juice and cross-linked maize starch and evaluation of its effects on the storage quality of fresh-cut pineapple

Yildirim-Yalcin M., Sadıkoğlu H., Seker M.

JOURNAL OF FOOD MEASUREMENT AND CHARACTERIZATION , cilt.15, ss.4669-4678, 2021 (SCI-Expanded)

Development of a Hybrid Renewable Energy System with Co-Firing Option

Kirim Y., Sadıkoğlu H., Melikoglu M.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , 2021 (SCI-Expanded) Sürdürülebilir Kalkınma

Characterization of edible film based on grape juice and cross-linked maize starch and its effects on the storage quality of chicken breast fillets

Yıldırım-Yalçın M., Sadıkoğlu H., Şeker M.

LWT , cilt.142, 2021 (SCI-Expanded)

Development and characterization of edible films based on modified corn starch and grape juice

Yildirim-Yalcin M., ŞEKER M., SADIKOĞLU H.

FOOD CHEMISTRY , cilt.292, ss.6-13, 2019 (SCI-Expanded)

Comparison of the different artificial neural networks in prediction of biomass gasification products

YÜCEL Ö., AYDIN E., SADIKOĞLU H.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH , cilt.43, sa.11, ss.5992-6003, 2019 (SCI-Expanded)

Response surface methodology for evaluation of the effects of screw speed, feed moisture and xanthan gum level on functional and physical properties of corn half products

GÜMÜŞAY Ö., ŞEKER M., SADIKOĞLU H.

LWT-FOOD SCIENCE AND TECHNOLOGY , cilt.111, ss.622-631, 2019 (SCI-Expanded)

Experimental study on hydrogen-rich syngas production via gasification of pine cone particles and wood pellets in a fixed bed downdraft gasifier

AYDIN E., YÜCEL Ö., SADIKOĞLU H.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.44, sa.32, ss.17389-17396, 2019 (SCI-Expanded) Sürdürülebilir Kalkınma

Synthesis and characterization of antimicrobial polylactide via ring-opening polymerization and click chemistry methods

Aynali F., DOĞANCI E., Doruk T., SADIKOĞLU H.

POLYMER INTERNATIONAL , cilt.68, sa.3, ss.385-393, 2019 (SCI-Expanded)

Numerical and experimental investigation of hydrogen-rich syngas production via biomass gasification

Aydin E. S., Yucel O., Sadikoglu H.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.43, sa.2, ss.1105-1115, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma

Assessment of CO2 reduction techniques of cement production in Turkey

Rende K., Ercan O., Hilmioglu B., Ergenekon P., SADIKOĞLU H.

INTERNATIONAL JOURNAL OF GLOBAL WARMING , cilt.16, sa.1, ss.18-38, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma

Development of a semi-empirical equilibrium model for downdraft gasification systems

Aydin E. S., Yucel O., Sadikoglu H.

ENERGY , cilt.130, ss.86-98, 2017 (SCI-Expanded)

Modelling and simulation of a moving interface problem: freeze drying of black tea extract

Aydin E. S., Yucel O., Sadikoglu H.

HEAT AND MASS TRANSFER , cilt.53, sa.6, ss.2143-2154, 2017 (SCI-Expanded) Sürdürülebilir Kalkınma

Freeze drying of turkey breast meat: Mathematical modeling and estimation of transport parameters

Cumhur O., Seker M., Sadikoglu H.

DRYING TECHNOLOGY , cilt.34, sa.5, ss.584-594, 2016 (SCI-Expanded)

FREEZE-DRYING KINETICS AND DIFFUSION MODELING OF SAFFRON (CROCUS SATIVUS L.)

ACAR B., Sadikoglu H., DOYMAZ İ.

JOURNAL OF FOOD PROCESSING AND PRESERVATION , cilt.39, sa.2, ss.142-149, 2015 (SCI-Expanded)

The role of flexibility and optimality in the prediction of intracellular fluxes of microbial central carbon metabolism

Tarlak F., Sadikoglu H., Cakir T.

MOLECULAR BIOSYSTEMS , cilt.10, sa.9, ss.2459-2465, 2014 (SCI-Expanded)

Sparsity as Cellular Objective to Infer Directed Metabolic Networks from Steady-State Metabolome Data: A Theoretical Analysis

Oksuz M., Sadikoglu H., Cakir T.

PLOS ONE , cilt.8, sa.12, 2013 (SCI-Expanded)

Role of Flexibility and Minimal Enzyme Production in the Prediction of Intracellular Fluxes of Microorganisms

Tarlak F., Sadikoglu H., Cakir T.

NEW BIOTECHNOLOGY , cilt.29, 2012 (SCI-Expanded)

Network Inference via Computational Analysis of Metabolome Data

Oksuz M., Sadikoglu H., Cakir T.

NEW BIOTECHNOLOGY , cilt.29, 2012 (SCI-Expanded)

Freeze Drying of Saffron (Crocus sativus L.)

ACAR B., Sadikoglu H., ÖZKAYMAK M.

DRYING TECHNOLOGY , cilt.29, sa.14, ss.1622-1627, 2011 (SCI-Expanded)

Solution of counter diffusion problem with position dependent diffusion coefficent by using variational methods

Yuksek K., Koca Y., Sadikoglu H.

JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS , cilt.232, sa.2, ss.285-294, 2009 (SCI-Expanded)

Freeze-drying of pharmaceutical products: Research and development needs

Sadikoglu H., OZDEMIR M., SEKER M.

DRYING TECHNOLOGY , cilt.24, sa.7, ss.849-861, 2006 (SCI-Expanded)

A mathematical model for potassium sorbate diffusion through whey protein films

Sadikoglu H., SEN D., OZDEMIR M.

DRYING TECHNOLOGY , cilt.24, sa.1, ss.21-29, 2006 (SCI-Expanded)

Optimal control of the secondary drying stage of freeze drying of solutions in vials using variational calculus

Sadikoglu H.

DRYING TECHNOLOGY , cilt.23, ss.33-57, 2005 (SCI-Expanded)

Properties of cross-linked starch produced in a single screw extruder with and without a mixing element

SEKER M., Sadikoglu H., HANNA M.

JOURNAL OF FOOD PROCESS ENGINEERING , cilt.27, sa.1, ss.47-63, 2004 (SCI-Expanded)

Phosphorus binding to starch during extrusion in both single- and twin-screw extruders with and without a mixing element

SEKER M., Sadikoglu H., OZDEMIR M., HANNA M.

JOURNAL OF FOOD ENGINEERING , cilt.59, sa.4, ss.355-360, 2003 (SCI-Expanded)

Cross-linking of starch with reactive extrusion and expansion of extrudates

SEKER M., Sadikoglu H., OZDEMIR M., HANNA M.

INTERNATIONAL JOURNAL OF FOOD PROPERTIES , cilt.6, sa.3, ss.473-480, 2003 (SCI-Expanded)

Optimal control of the primary drying stage of freeze drying of solutions in vials using variational calculus

Sadikoglu H., Ozdemir M., Seker M.

DRYING TECHNOLOGY , cilt.21, sa.7, ss.1307-1331, 2003 (SCI-Expanded)

Use of UNIFAC in the prediction of water activity values of aqueous polyol solutions

OZDEMIR M., Sadikoglu H.

JOURNAL OF FOOD PROCESSING AND PRESERVATION , cilt.23, sa.2, ss.109-120, 1999 (SCI-Expanded)

Surface treatment of food packaging polymers by plasmas

OZDEMIR M., YURTERI C., Sadikoglu H.

FOOD TECHNOLOGY , cilt.53, sa.4, ss.54-58, 1999 (SCI-Expanded)

Physical polymer surface modification methods and applications in food packaging polymers

OZDEMIR M., YURTERI C., Sadikoglu H.

CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION , cilt.39, sa.5, ss.457-477, 1999 (SCI-Expanded)

Estimation of the effect of product shrinkage on the drying times, heat input and condenser load of the primary and secondary drying stages of the lyophilization process in vials

Sadikoglu H., LIAPIS A., CROSSER O., BRUTTINI R.

DRYING TECHNOLOGY , cilt.17, sa.10, ss.2013-2035, 1999 (SCI-Expanded)

Frontal chromatography of proteins: The effect on column performance of the restricted diffusion of molecules in porous chromatographic adsorbents

LIAPIS A., Sadikoglu H., CROSSER O.

JOURNAL OF CHROMATOGRAPHY A , cilt.828, ss.345-356, 1998 (SCI-Expanded)

Characterization of rheological properties of systems containing sugar substitutes and carrageenan

OZDEMIR M., Sadikoglu H.

INTERNATIONAL JOURNAL OF FOOD SCIENCE AND TECHNOLOGY , cilt.33, sa.5, ss.439-444, 1998 (SCI-Expanded)

A new and emerging technology: Laser-induced surface modification of polymers

OZDEMIR M., Sadikoglu H.

TRENDS IN FOOD SCIENCE & TECHNOLOGY , cilt.9, sa.4, ss.159-167, 1998 (SCI-Expanded)

Optimal control of the primary and secondary drying stages of bulk solution freeze drying in trays

Sadikoglu H., Liapis A., Crosser O.

DRYING TECHNOLOGY , cilt.16, ss.399-431, 1998 (SCI-Expanded)

Dynamic pressure rise in the drying chamber as a remote sensing method for monitoring the temperature of the product during the primary drying stage of freeze drying

LIAPIS A., Sadikoglu H.

DRYING TECHNOLOGY , cilt.16, sa.6, ss.1153-1171, 1998 (SCI-Expanded)

Mathematical modelling of the primary and secondary drying stages of bulk solution freeze-drying in trays: Parameter estimation and model discrimination by comparison of theoretical results with experimental data

Sadikoglu H., LIAPIS A.

DRYING TECHNOLOGY , cilt.15, ss.791-810, 1997 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Assessment and determination of 2030 onshore wind and solar PV energy targets of Turkiye considering several investment and cost scenarios

İnsel M. A., Sadıkoğlu H., Melikoğlu M.

RESULTS IN ENGINEERING , cilt.16, 2022 (ESCI)

Dondurarak Kurutma Teknolojisi ve Evreleri

SADIKOĞLU H., OZDEMIR M.

GIDA , cilt.28, sa.6, ss.643-649, 2003 (Hakemli Dergi)

Dondurarak Kurutma Teknolojisi

SADIKOĞLU H., OZDEMIR M.

TERMOKLİMA , cilt.103, ss.53-61, 2001 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Classification of Wastes by Utilizing Image Processing and Convolutional Neural Networks

İnsel M. A., Baş N., Yücel Ö., Sadıkoğlu H.

7th Eurasia Waste Management Symposium, İstanbul, Türkiye, 21 - 23 Ekim 2024, ss.1-8 Sürdürülebilir Kalkınma

Reaction Mechanism Modelling for Cement Calciner

Cebeci H., Sadıkoğlu H., Yücel Ö.

7th International Conference on Engineering Sciences (ICES 2024), Ankara, Türkiye, 9 - 11 Şubat 2024, ss.1-7

Wind Power Forecasting by using Advanced Artificial Neural Networks

İnsel M. A., Yücel Ö., Sadıkoğlu H.

7th International Conference on Engineering Sciences, Ankara, Türkiye, 9 - 10 Şubat 2024 Sürdürülebilir Kalkınma

Estimation of Biocrude Oil Yield by Machine Learning

Güngör Ş., İnsel M. A., Sadıkoğlu H.

7th International Conference on Engineering Sciences, Ankara, Türkiye, 9 - 10 Şubat 2024 Sürdürülebilir Kalkınma

AERODYNAMIC DESIGN AND COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSIS OF A SUPERSONIC ROCKET AND ROCKET ENGINE COMBUSTION CHAMBER

Kıvrak E. Ç., Yücel Ö., Sadıkoğlu H.

ANKARA INTERNATIONAL CONGRESS ON SCIENTIFIC RESEARCH-IX, Ankara, Türkiye, 27 - 29 Aralık 2023, ss.22-29

Determination of pH Value Using Conventional pH Strips by Image Processing

Eid F., İnsel M. A., Sadıkoğlu H.

6th International Eurasian Conference on Biological and Chemical Sciences , Ankara, Türkiye, 11 - 13 Ekim 2023, ss.325

Three-Dimensional Printing-Based Fabrication and Enhancement of Nerve Tissue Connectors Augmented with Nanoparticles

Kaçar N., BERBER H., YILMAZER H., SADIKOĞLU H.

Applications of Chemistry in Nanosciences and Biomaterials Engineering, BUCAREST, Romanya, 28 - 30 Haziran 2023

Quality Control in Chocolate Coating Processes by Image Processing: Determination of Almond Mass and Homogeneity of Almond Spread

Özçelik S., Insel M. A., Atıcı Ö. A., Celebi E., Baydar Atak G., Sadikoglu H.

12th International Symposium on Intelligent Manufacturing and Service Systems, Sakarya, Türkiye, 26 - 28 Mayıs 2023, ss.69-80 Sürdürülebilir Kalkınma

Production and Development of Nervous Tissue Connectors Functioned with Nanoparticle, Pharmaceutical and Animal Derived Extracellular Matrix by 3D Printing

Kaçar N., BERBER H., YILMAZER H., SADIKOĞLU H.

The 16th International Scientific Research Congress, 23 - 24 Mart 2023

Assessment of Lydersen Method in Estimation of Critical Properties of Various Alcohols

Alhaloush R., İnsel M. A., Sadıkoğlu H.

5th International Eurasian Conference on Biological and Chemical Sciences, Ankara, Türkiye, 23 - 25 Kasım 2022, ss.458 Sürdürülebilir Kalkınma

Fabrication Methods of 2D Nanomaterials for Photocatalytic and Electrocatalytic Hydrogen Evolution: A Review

Çakar M., İnsel M. A., Sadıkoğlu H.

1st International Two-Dimensional Nanomaterials Conference, İstanbul, Türkiye, 25 - 27 Mayıs 2022, ss.38 Sürdürülebilir Kalkınma

Synthesis Gas Production from Waste Tires

YILDIRIM E., YÜCEL Ö., SADIKOĞLU H.

7th International Engineering And Technology Management Congress, İstanbul, Türkiye, 17 - 19 Nisan 2022

Investigation of the impact of different drying methods on the physical properties and quality of Salep

Bilgiç B., Baydar Atak G., Sadıkoğlu H.

4TH INTERNATIONAL EURASIAN CONFERENCE ON BIOLOGICAL AND CHEMICAL SCIENCES, Ankara, Türkiye, 24 - 26 Kasım 2021, ss.1156

Development of tissue scaffolds through 3D bioprinting for burn wound healing

Tokat P., METE GÜNAYDIN H., YILMAZER Y., GÜNDÜZ O., YILMAZER H., SADIKOĞLU H.

5th International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry, Antalya, Türkiye, 20 - 23 Temmuz 2021

Polycarbonate / Graphene Oxide Composite Membrane Production

MUSLU M., ORUÇ M. E., ÜSTÜNDAĞ C. B., SADIKOĞLU H.

20th International International Metallurgy & Materials Congress, İstanbul, Türkiye, 16 - 18 Haziran 2021

Effects of different drying methods on the quality of dried Serapias vomeracea. International Eurasian Conference on Biotechnology and Biochemistry (BioTechBioChem 2020)

BİLGİÇ B., ATAK G., SADIKOĞLU H.

International Eurasian Conference on Biotechnology and Biochemistry (BioTechBioChem 2020), Ankara, Türkiye, 16 - 18 Aralık 2020

Fabrication of a microchip with sub-10 microns for platelet formation from megakaryocyte

Baydar Atak G., Omeroglu S., Sadıkoğlu H., Oruç M. E.

2nd International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2020), Gaziantep, Türkiye, 7 - 09 Ekim 2020, ss.416

"Employing of Hydrophobic Membrane for Collecting of Gases in the Planar Electrolyzer,"

Meşe N., Sadıkoğlu H., Oruç M. E.

2nd International Congress of Academic Research, Bolu, February 2020., Bolu, Türkiye, 4 - 06 Şubat 2020, ss.2-10

THEORETICAL INVESTIGATION OF FREEZE-DRYING

Bilgiç B., Baydar Atak G., Sadıkoğlu H.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING , İstanbul, Türkiye, 17 - 19 Aralık 2019, ss.1362-1363

Cost Analysis of Renewable Energy Technologies

İnsel M. A., Sadıkoğlu H., Melikoğlu M.

International Conference on Advences in Mechanical Engineering, İstanbul, Türkiye, 17 - 19 Aralık 2019, ss.1426 Sürdürülebilir Kalkınma

A GENERAL OVERVIEW: PRODUCTION OF PLATELETS IN A MICROCHANNEL

Baydar Atak G., Oruç M. E., Sadıkoğlu H.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING , İstanbul, Türkiye, 17 - 19 Aralık 2019, ss.1204 Sürdürülebilir Kalkınma

Theoretical Investigation of Significant Parameters Affecting the Platelet Formation in Microchips

Baydar Atak G., İnsel M. A., Oruç M. E., Sadıkoğlu H.

ICESME, Girne, Kıbrıs (Kktc), 8 - 10 Kasım 2019, ss.23

Antimikrobiyal Polilaktik Asit Filmlerin Hazırlanması Ve Termal/Mekanik Özelliklerinin İncelenmesi

Aynalı F., Sadıkoğlu H.

31.Ulusal Kimya Kongresi, İstanbul, Türkiye, 10 Eylül - 13 Ekim 2019, ss.10-16

Modification and Modelling of GasDiffusion Layer on PEM Fuel Cells

Kil Ş., ÖZDEMİR O. K., SADIKOĞLU H.

4th International Hydrogen Technologies Congress, Edirne, Türkiye, 20 - 23 Haziran 2019

Optimization of Gas Diffusion Layer on PEM Fuel Cells

Kil Ş., ÖZDEMİR O. K., SADIKOĞLU H.

International Eurasian Conference onScience, Engineering and Technology, 22 - 23 Kasım 2018

Optimization of Gas Diffusion Layer for Pem Fuel Cells

Kil Ş., ÖZDEMİR O. K., SADIKOĞLU H.

International Eurasian Conference on Science, Engineering and Technology (EurasianSciEngTech2018), Ankara, Türkiye, 22 Kasım 2018, ss.20-25

Mathematical Modelling of Spray Freeze Drying Method Used for Inhaled Drug Production

Uğurlu D., Aydın E., SADIKOĞLU H.

International Eurasian Conference on Science, Engineering and Technology (EurasianSciEngTech2018), Ankara, Türkiye, 22 Kasım 2018, ss.1-8

FLOW DYNAMICS IN A MICROCHANNEL FOR PLATELET FORMATION FROM MEGAKARYOCYTE

Baydar Atak G., Oruc M. E., Sadikoglu H.

International Conference on Technology, Engineering and Science (IConTES), Antalya, Türkiye, 26 Ekim 2018, ss.79

ANALYTICAL SOLUTION TO COUNTERCURRENT DIFFUSION PROBLEM WITH DYNAMIC BOUNDARY CONDITIONS

SADIKOĞLU H., AYDIN E. S., YÜCEL Ö.

ICFAS2017 "International Congress on Fundamental and Applied Sciences", Saraybosna, Bosna-Hersek, 21 Ağustos 2017, ss.12-19

NUMERICAL SOLUTION OF THE FREEZE DRYING OF BLACK TEA EXTRACT WITH ORTHOGONAL COLLOCATION METHOD

AYDIN E. S., YÜCEL Ö., SADIKOĞLU H.

ICFAS2017 "International Congress on Fundamental and Applied Sciences", Saraybosna, Bosna-Hersek, 21 Ağustos 2017, ss.20-26

A modeling approach to determine the relationship between gasification parameters and hydrogen production

AYDIN E. S., YÜCEL Ö., SADIKOĞLU H.

3rd International Conference on Engineering and Natural Sciences, Budapeşde, Macaristan, 03 Mayıs 2017, ss.255-262 Sürdürülebilir Kalkınma

Proximate analysis of torrefied and pyrolyzed wood pellets using ft-nir spectroscopy

AYDIN E. S., YÜCEL Ö., SADIKOĞLU H.

3rd International Conference on Engineering and Natural Sciences, Budapeşde, Macaristan, 03 Mayıs 2017, ss.755-760

Numerical Investigation of Fixed Bed Downdraft Woody Biomass Gasification

AYDIN E. S., YÜCEL Ö., SADIKOĞLU H.

8th International Exergy and Environment Symposium (IEEES-8), Antalya, Türkiye, 01 Mayıs 2016, ss.867-871

Freeze Drying of Instant Tea and Determination of Effective Parameters

AYDIN E. S., YÜCEL Ö., SADIKOĞLU H.

1st International Porous and Powder Materials Symposium and Exhibition, İzmir, Türkiye, 03 Eylül 2013, ss.115-121

Effect of Operational Parameters on Spray Freeze Drying

AYDIN E. S., YÜCEL Ö., SADIKOĞLU H.

44thWorld Chemistry Congress, İstanbul, Türkiye, 11 Ağustos 2013, ss.12-16

Optimization Based Inference of Metabolic Networks from Metabolome Data

Oksuz M., Sadikoglu H., Cakir T.

11th International Conference on Computational Methods in Systems Biology (CMSB), Klosterneuburg, Avusturya, 22 - 24 Eylül 2013, cilt.8130, ss.266-267

Role of Flexibility and Minimal Enzyme Production in the Prediction of Intracellular Fluxes of Microorganisms

TARLAK F., SADIKOĞLU H., ÇAKIR T.

15th European Conference on Biotechnology (ECB-15), İstanbul, Türkiye, 23 - 26 Eylül 2012

Network Inference via Computational Analysis of Metabolome Data

ÖKSÜZ M., ÇAKIR T., SADIKOĞLU H.

15th European Conference on Biotechnology (ECB-15), İstanbul, Türkiye, 23 - 26 Eylül 2012

Predicting Intracellular Flux Distributions of Microorganisms

TARLAK F., SADIKOĞLU H., CAKIR T.

2hnd Conference on Constraint-based Reconstruction and Analysis (COBRA 2012), Helsingor, Danimarka, 07 Eylül 2012, ss.99-102

Investigation of Alternative Network Inference Methods for Reverse Engineering of Metabolome Data

OKSUZ M., SADIKOĞLU H., CAKIR T.

2hnd Conference on Constraint-based Reconstruction and Analysis (COBRA 2012), Helsingor, Danimarka, 07 Eylül 2012, ss.75-81

Metabolik Akı Analizi Tekniklerini Kullanarak Hücrenin Biyolojik Amacının İncelenmesi

TARLAK F., SADIKOĞLU H., CAKIR T.

10. Ulusal Kimya Mühendisliği Kongresi (UKMK-10), İstanbul, Türkiye, 03 Eylül 2012, ss.48-45

Metabolom Verilerinin Hesaplamalı Analizi ile Metebolik Ağyapı Çıkarımı

OKSUZ M., SADIKOĞLU H., CAKIR T.

10. Ulusal Kimya Mühendisliği Kongresi (UKMK-10), İstanbul, Türkiye, 03 Eylül 2012, ss.18-25

Optimal Control of the Primary and Secondary Drying Stages of the Freeze Drying of Pharmaceuticals in vials

Bruttını R., Lıapıs A., Sadıkoğlu H.

12th International Drying Symposium (IDS’ 00), Nijmegen, Hollanda, 21 - 28 Ağustos 2000, ss.946-954

Dynamic Manometric Temperature Measurement

SADIKOĞLU H., LIAPIS A.

Freeze-Drying of Pharmaceuticals and Biologicals Conference, Brownsville, Vermont, Amerika Birleşik Devletleri, 23 Eylül 1998, ss.288

A Novel Remote Sensing Method for Monitoring the Temperature of the Product During the Primary Drying Stage of Freeze Drying

SADIKOĞLU H., LIAPIS A.

Eleventh International Drying Symposium (IDS’ 98), Selanik, Yunanistan, 23 Ağustos 1998, ss.258

Dynamic Behavior and Process Control of the Primary and Secondary Drying Stages of Freeze Drying of Pharmaceuticals in Vials

SHEEHAN P., SADIKOĞLU H., LIAPIS A.

11th International Drying Symposium (IDS’ 98), Selanik, Yunanistan, 19 Ağustos 1998, ss.1727-1740

A STUDY ON THE DRYING OF SULTANA GRAPES BY DIFFERENT TECHNIQUES AND EFFECTIVE PARAMETERS

PALA M., SAYGI Y., SADIKOGLU H.

7TH INTERNATIONAL FLAVOR CONF : FOOD FLAVORS, INGREDIENTS AND COMPOSITION, PYTHAGORION, Yunanistan, 24 - 26 Haziran 1992, cilt.32, ss.437-444

Kitap & Kitap Bölümleri

Quality Control in Chocolate Coating Processes by Image Processing: Determination of Almond Mass and Homogeneity of Almond Spread

Özçelik S., İnsel M. A., Atici Ö. A., Celebi E., Baydar-Atak G., Sadıkoğlu H.

Advances in Intelligent Manufacturing and Service System Informatics, Zekâi Şen,Özer Uygun,Caner Erden, Editör, Springer Nature, Singapore, ss.69-80, 2023 Sürdürülebilir Kalkınma

Diğer Yayınlar

Yıldız Teknik Üniversitesi, Matematik Bölümü Davetli Konuşmacı olarak "Physical Systems to Mathematics"

SADIKOĞLU H.

Sunum, ss.1-8, 2018

21. Yüzyılda Gıda Teknolojileri Paneli Dondurarak Kurutmanın İşleminin Gıda Sanayi İçin Önemi

SADIKOĞLU H.

Sunum, ss.25, 2002

Metrikler

Yayın

103

Atıf (WoS)

1216

H-İndeks (WoS)

Atıf (Scopus)

1214

H-İndeks (Scopus)

Atıf (Scholar)

2003

H-İndeks (Scholar)

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Kitap & Kitap Bölümleri

Diğer Yayınlar

Metrikler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

Fikri Mülkiyet

Tez Danışmanlığı

Açık Erişim