Published journal articles indexed by SCI, SSCI, and AHCI
Forecasting natural gas demand in Istanbul by artificial neural networks method and planning of city gate stations
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY
, vol.39, no.2, pp.1017-1028, 2023 (SCI-Expanded)
An investigation of the thermal behavior of constructal theory-based pore-scale porous media by using a combination of computational fluid dynamics and machine learning
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
, vol.194, no.September, pp.1-18, 2022 (SCI-Expanded)
Heat transfer and fluid flow characteristics in a plate heat exchanger filled with copper foam
Heat and Mass Transfer/Waerme- und Stoffuebertragung
, vol.56, no.12, pp.3261-3271, 2020 (SCI-Expanded)
Prediction of friction factor of pure water flowing inside vertical smooth and microfin tubes by using artificial neural networks
Heat and Mass Transfer/Waerme- und Stoffuebertragung
, vol.53, no.2, pp.673-685, 2017 (SCI-Expanded)
Effect of Refrigerant Type and Insulation Thickness on Refrigeration Systems of Land and Sea Vehicles
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING
, vol.62, no.4, pp.252-259, 2016 (SCI-Expanded)
INVESTIGATION ON THE RELATION BETWEEN EXERGY LOSS AND NTU
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY
, vol.35, no.2, pp.153-164, 2015 (SCI-Expanded)
A review of nanorefrigerants: Flow characteristics and applications
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID
, vol.44, pp.125-140, 2014 (SCI-Expanded)
Investigation of pool boiling of nanofluids using artificial neural networks and correlation development techniques
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
, vol.39, no.3, pp.424-431, 2012 (SCI-Expanded)
Numerical investigation of heat transfer and pressure drop in enhanced tubes
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
, vol.38, no.10, pp.1384-1391, 2011 (SCI-Expanded)
Condensation pressure drop characteristics of various refrigerants in a horizontal smooth tube
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
, vol.38, no.4, pp.504-512, 2011 (SCI-Expanded)
A performance comparison of vapour-compression refrigeration system using various alternative refrigerants
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
, vol.37, no.9, pp.1340-1349, 2010 (SCI-Expanded)
Effect of void fraction models on the film thickness of R134a during downward condensation in a vertical smooth tube
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
, vol.36, no.2, pp.172-179, 2009 (SCI-Expanded)
Two-phase friction factor in vertical downward flow in high mass flux region of refrigerant HFC-134a during condensation
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER
, vol.35, no.9, pp.1147-1152, 2008 (SCI-Expanded)
Articles Published in Other Journals
PARAMETRIC STUDY OF ENERGY, EXERGY AND THERMOECONOMIC ANALYSES ON VAPOR-COMPRESSION SYSTEM CASCADED WITH LIBR/WATER AND NH3/WATER ABSORBTION CASCADE REFRIGERATION CYCLE
Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik
, vol.18, pp.78-96, 2017 (Peer-Reviewed Journal)
Boru içinde yogusmada isi transferi katsayisinin tespiti
T.M.M.O. Tesisat Muhendisligi Dergisi
, no.113, pp.50-60, 2009 (Peer-Reviewed Journal)
Kapali yuzme havuzlarinda iklimlendirme
T.M.M.O. Tesisat Muhendisligi Dergisi
, vol.104, pp.64-66, 2008 (Peer-Reviewed Journal)
Doner tip isi degistiricileri ve ornek bir uygulama
T.M.M.O. Tesisat Muhendisligi Dergisi
, vol.107, pp.5-12, 2008 (Peer-Reviewed Journal)
Ic yuzeyi mikro kanatli borularda yoguşma
T.M.M.O. Tesisat Muhendisligi Dergisi
, vol.106, pp.38-46, 2008 (Peer-Reviewed Journal)
Bir firin bacasindan isi degiştirici yardimiyla atik isi geri kazanimi
T.M.M.O. Tesisat Muhendisligi Dergisi
, vol.108, no.5, 2008 (Peer-Reviewed Journal)
Bir dokme lpg tesisine ait ornek uygulama
T.M.M.O. Tesisat Muhendisligi Dergisi
, vol.107, pp.32-36, 2008 (Peer-Reviewed Journal)
Bir Endüstriyel Tesis Bacasındaki Atık Gaz Akışının Sayısal İncelenmesi
Tesisat Mühendisliği
, 2006 (Non Peer-Reviewed Journal)
Kapali yuzme havuzlarında buharlasma miktarinin hesaplanmasi
Tesisat Teknigi Dergisi
, vol.111, pp.186-188, 2005 (Peer-Reviewed Journal)
Refereed Congress / Symposium Publications in Proceedings
A REVIEW OF NANOTECHNOLOGICAL ADVANCES ABOUT ANODE MATERIALS TO IMPROVE THE PERFORMANCE OF ELECTRIC VEHICLE LITHIUM-ION BATTERIES
6th International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 20 - 22 October 2021, pp.1458-1466
TECHNICALITY OF THE EXPERIMENTAL SETUP FOR THE INVESTIGATION OF RADIANT HEATING/COOLING SYSTEMS
6th International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 20 - 22 October 2021, pp.1422-1431
INVESTIGATION OF THE EFFECT OF FLOW CHANNEL DESGIN ON PEM FUEL CELL VOLTAGE
6th International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 20 October 2021 - 22 January 2022, pp.1555
ENERGY BALANCE AND EXERGY EFFİCİENCY WİTH THE SAMPLE CFD PROGRAM OF SPORTS TECHNOLOGİES
6th International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 20 - 22 October 2021, pp.1256-1265
EXPERIMENTAL SETUP DESIGN FOR INVESTIGATION OF FLOW BOILING HEAT TRANSFER CHARACTERISTICS OF R-134A IN HELICALLY COILED TUBES WITH SMOOTH AND CORRUGATED SURFACES
6th International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 20 - 22 October 2021, pp.605-610
OPTIMUM INSULATION THICKNESS IN SUBMARINE
6th International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 20 - 22 October 2021, pp.1562
Analysis of thermal comfort in room via computational fluid dynamics
3th International Congress on Engineering and Technology Management, İstanbul, Turkey, 16 - 17 April 2020, pp.69
BRIEF LITERATURE REVIEW ON THE FLOW BOILING HEAT TRANSFER CHARACTERISTICS OF HELICAL COILS
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Turkey, 17 - 19 December 2019
A REVIEW ON NANOFLUIDS VISCOSITY AND DENSITY EFFECTS ON THERMAL APPLICATIONS
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Turkey, 17 - 19 December 2019, pp.2326-2341
AERODYNAMIC ANALYSIS AND AERO PACKAGE OPTIMIZATION IN TRUCKS
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICALENGINEERING ISTANBUL 2019, İstanbul, Turkey, 17 - 19 December 2019
INVESTIGATION OF CONDENSATION CHARACTERISTICS FOR INCLINED PIPES ON RECENT LITERATURE
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICALENGINEERING ISTANBUL 2019, İstanbul, Turkey, 17 - 19 December 2019
BRIEF LITERATURE REVIEW ON THE BOILING HEAT TRANSFER CHARACTERISTICS OF INCLINED TUBES
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Turkey, 17 - 19 December 2019
Production of Carbon Fibers and Paper From Vegetable Fibers for Fuel Cells
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Turkey, 17 - 19 December 2019
SIMULATION OF FLUID STRUCTURE INTERACTION AROUND A BEAM AT VARIOUS SHAPES AND INCLINATION ANGELS
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICALENGINEERING ISTANBUL 2019, İstanbul, Turkey, 17 - 19 December 2019
INVESTIGATION OF THE COAL AND BIOMASS FUELS EFFECTS ON BOILER EFFICIENCY IN COGENERATION POWER PLANTS
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Turkey, 17 - 19 December 2019
BRIEF LITERATURE REVIEW ON THE CONDENSATION HEAT TRANSFER CHARACTERISTICS OF HELICAL COILS
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Turkey, 17 - 19 December 2019
BRIEF LITERATURE REVIEW ON THE SINGLE-PHASE FLOW HEAT TRANSFER CHARACTERISTICS OF HELICAL COILS
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Turkey, 17 - 19 December 2019
Production of carbon fibers and paper from vegetable fibers for using fuel cells
5th Conference On Advances in Mechanical Engineering Icame 2019, İstanbul, Turkey, 19 - 21 December 2019
NUMERICAL INVESTIGATION ON HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS OF HELICALLY COILED HEAT EXCHANGERS
World Energy Strategies Congress and Exhibition (WESCE-2019), İstanbul, Turkey, 26 - 28 August 2019
A research on heat transfer characteristics of hairpin heat exchangers numerically
5. Uluslararasi Muhendislik Mimarlik ve Tasarim Kongresi, 23 - 24 April 2019
An Experimental Investigation on Heat Transfer Characteristics over an Underfloor Heating System
4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, 19-21 DECEMBER 2018, İstanbul, Turkey, 19 - 21 December 2018, vol.1, pp.1831-1843
NATURAL GAS DISTRIBUTION NETWORK IN SUPPLY SECURITY SUPPORT: DEMAND FORECAST STUDY FOR ISTANBUL
4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, İstanbul, Turkey, 19 - 21 December 2018, vol.1, pp.37
Cooling Technology and Thermodynamic Applications for Food Preservation
4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, İstanbul, Turkey, 19 - 21 December 2018, vol.1, pp.1133-1136
DETERMINATION OF THE VISCOSITY CHARACTERISTICS OF WATER BASEDSİO2-GRAPHITE HYBRID NANOFLUIDS
4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, 19-21 DECEMBER 2018, İstanbul, Turkey, 19 - 21 December 2018, vol.1, pp.1844-1855
Numerical Investigation on the External Flow of Tube Bank
4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, İstanbul, Turkey, 19 - 21 December 2018, vol.1, pp.129-135
3-Dimensional Numerical Simulation of Helical Coil Heat Exchangers
4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, İstanbul, Turkey, 19 - 21 December 2018, vol.1, pp.1097
Numerical Optimization of Pin Fin Heat Sink for Electronic Cooling
4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, İstanbul, Turkey, 19 - 21 December 2018, vol.1, pp.129-135
Experiments on Determination of Heat Transfer Coefficients for a Radiant Heated Enclosure
INTERNATIONAL ENGINEERING AND TECHNOLOGY SYMPOSIUM, Batman, Turkey, 3 - 05 May 2018, vol.1, no.1, pp.1240-1245
A review of energy management in industry
3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2017, İstanbul, Turkey, 19 - 21 December 2017, pp.262-269
An Investigation to Determine Heat Transfer Characteristics of R134a Used In Smooth and Microfin Pipes
3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2017, İstanbul, Turkey, 19 - 21 December 2017, pp.1-15
Determination of Design Parameters Effects on the Cost of a Double-Pipe Heat Exchanger
3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2017, İstanbul, Turkey, 19 - 21 December 2017, pp.1-15
AN EXAMINATION OF FLOW BOILING OF R134A THROUGH A MULTI-MICROCHANNEL HEAT SINK
3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2017, İstanbul, Turkey, 19 - 21 December 2017, pp.1-15
An Investigation to Acquire Radiative Heat Transfer Coefficients in a Radiant Ceiling Cooling Application
3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2017, İstanbul, Turkey, 19 - 21 December 2017, pp.1-15
CFD analyses on the cooling of electronic chipsets using various types of heat sinks
1th INTERNATIONAL CONFERENCE ON ADVANCES IN ENGINEERING SCIENCES: THAILAND 2017, Chon-Buri, Thailand, 3 - 05 July 2017, pp.1-15
Experımental apparatus for the determinatıon of heat transfer coefficıents for radiant heating/cooling systems
1th INTERNATIONAL CONFERENCE ON ADVANCES IN ENGINEERING SCIENCES: THAILAND 2017, Phuket, Thailand, 3 - 05 July 2017
Experimental Analyses on the Single Stage Vapor Compression Cycle
1th INTERNATIONAL CONFERENCE ON ADVANCES IN ENGINEERING SCIENCES: THAILAND 2017, Chon-Buri, Thailand, 3 - 05 July 2017, pp.1-15
A Feasibility Study of Solar Energy-Economic Analysis from Aksaray, Turkey
INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING: ISTANBUL 2017, İstanbul, Turkey, 25 - 28 April 2017, pp.537-540
SINGLE-PHASE TURBULENT FLOW OF R-134A IN A MULTIPORTMICROCHANNEL HEAT SINK
1th INTERNATIONAL CONFERENCE ON ENERGY ANDTHERMAL ENGINEERING, İstanbul, Turkey, 25 - 28 April 2017, pp.1-15
Determination of the Viscosity of refrigeration Compressor Oils Withcarbon Nanotubes
1th INTERNATIONAL CONFERENCE ON ADVANCES INSCIENCE AND ARTS, İstanbul, Turkey, 29 - 31 March 2017, pp.1-15
CFD ANALYSIS ON THE INNER FLUID’S OPTIMUM VELOCITY IN A PIPE IN PIPE HEAT EXCHANGER
ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017 – ICPAS 2017, İstanbul, Turkey, 4 - 06 January 2017, pp.1-15
Validation of domestic radiators’ thermal capacity with a numerical software
INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING: ISTANBUL 2017, İstanbul, Turkey, 4 - 06 January 2017, pp.1-15
Numerical Solution of Heat Exchanger Used in Petroleum Industry
1th INTERNATIONAL CONFERENCE ON PROGRESS IN APPLIED SCIENCE, İstanbul, Turkey, 4 - 06 January 2017, pp.1-15
An experimental investigation on the use of natural gas diesel fuel mixture on performance and emissions of a CI engine
International Conference on Mechanical and Production Engineering, Bangkok, Thailand, 13 - 14 July 2016, pp.1-15
A numerical investigation on the convective heat transfer coefficient in radiant ceiling cooling systems
International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 10 - 13 May 2016, pp.1-15
Experimental apparatus design for study of pool boiling heat transfer characteristics of Al2O3 water nanofluids on a horizontal cylindrical heating surface
International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 10 - 13 May 2016, pp.1-15
Calculation procedure of double pipe heat exchanger design having nanofluid flow
International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 10 - 13 May 2016, pp.963-965
New approach on the determination of the total heat transfer coefficient in radiant wall heating systems
International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 10 - 13 May 2016, pp.1-15
Experımental apparatus desıgn for study of heat transfer and flow characteristics of water flowing through internally grooved tubes
International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 10 - 13 May 2016, pp.1-15
COMPUTATIONAL INVESTIGATION OVER CONVECTIVE HEAT TRANSFER IN RADIANT HEATED LIVING PLACES
INTERNATIONAL CONFERENCE ON ENERGY SYSTEMS ISTANBUL 2015, İstanbul, Turkey, 23 - 25 December 2015, pp.1055-1058
Fundamental Basis and Implementation of Shell and Tube Heat Exchanger Project Design: Condenser Study
INTERNATIONAL CONFERENCE ON ENERGY SYSTEMS ISTANBUL 2015, İstanbul, Turkey, 23 - 25 December 2015, pp.1059-1066
EFFECT OF FUEL TEMPERATURE ON PERFORMANCE AND EMISSIONS OF ACOMPRESSION IGNITIONENGINE
INTERNATIONAL CONFERENCE ON ENERGY SYSTEMS ISTANBUL, İstanbul, Turkey, 23 - 25 December 2015, pp.1-15
EXPERIMENTALLY DETERMINATION OF INJECTION CHARACTERISTIC OF A MECHANICAL FUEL SYSTEM EQUIPPED DIESEL ENGINE CONVERTED TO COMMON RAIL FUEL SYSTEM
INTERNATIONAL CONFERENCE ON ENERGY SYSTEMS ISTANBUL, İstanbul, Turkey, 23 - 25 December 2015, pp.1-15
Experimental Apparatus For The Determination of VelocityDistribution of Hot Round Jet in Cross Flow
INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Turkey, 13 - 15 May 2015, pp.136-140
EXPERIMENTAL APPARATUS FOR THE DETERMINATION OF VELOCITY DISTRIBUTION OF HOT ROUNDA JET IN CROSS FLOW
INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Turkey, 13 - 15 May 2015, pp.1-15
The investigation of convective heat transfer in different room geometries by means of numerical solution techniques
Energy Technologies Conference (ENTECH14), 22 - 24 December 2014
A critical review on condensation heat transfer in microchannels and minichannels
Proceedings of the 15th International Heat Transfer Conference (2014), 10 - 15 August 2014
A critical review on the determination of convective heat transfer coefficient during condensation in smooth and enhanced tubes
ASME 2013 Heat Transfer Summer Conference, HT 2013 Collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology, Minneapolis, MN, United States Of America, 14 - 19 July 2013, vol.2
FUndamental basis and application of cold-room project design: A case study of frigoship
ASME 2013 Heat Transfer Summer Conference, HT 2013 Collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology, Minneapolis, MN, United States Of America, 14 - 19 July 2013, vol.1
A critical review on the determination of pressure drop during condensation in smooth and enhanced tubes
ASME 2013 Heat Transfer Summer Conference, HT 2013 Collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology, Minneapolis, MN, United States Of America, 14 - 19 July 2013, vol.2
Application of artificial neural networks to predict heat transfer from buried pipe for ground source heat pump applications
ASME 2013 Heat Transfer Summer Conference, HT 2013 Collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology, Minneapolis, MN, United States Of America, 14 - 19 July 2013, vol.4