Prof.Dr. Ahmet Selim DALKILI&#199;

Yiamsawasd T., DALKILIÇ A. S., Wongwises S.

Isi Bilimi Ve Teknigi Dergisi/ Journal of Thermal Science and Technology , cilt.32, sa.1, ss.67-79, 2012 (SCI-Expanded)

Measurement of the thermal conductivity of titania and alumina nanofluids

Thermochimica Acta , cilt.545, ss.48-56, 2012 (SCI-Expanded)

A correlation development for predicting the pressure drop of various refrigerants during condensation and evaporation in horizontal smooth and micro-fin tubes

Balcilar M., DALKILIÇ A. S., AĞRA Ö., ATAYILMAZ Ş. Ö., WONGWISES S.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.39, sa.7, ss.937-944, 2012 (SCI-Expanded)

Nucleate pool boiling heat transfer correlation for TiO 2-water nanofluids

Suriyawong A., DALKILIÇ A. S., Wongwises S.

Journal of ASTM International , cilt.9, sa.5, 2012 (SCI-Expanded)

Theoretical analysis on the prediction of coefficient of performance (COP) of vapour compression refrigeration systems using various alternative refrigerants

Dalkılıç A. S., Kürekci N. A., Wongwises S.

ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.32, sa.1, ss.67-79, 2012 (SCI-Expanded)

Investigation of pool boiling of nanofluids using artificial neural networks and correlation development techniques

Balcilar M., DALKILIÇ A. S., SURIYAWONG A., YIAMSAWAS T., WONGWISES S.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.39, sa.3, ss.424-431, 2012 (SCI-Expanded)

Effect of void fraction and friction factor models on the prediction of pressure drop of R134a during downward condensation in a vertical tube

HEAT AND MASS TRANSFER , cilt.48, sa.1, ss.123-139, 2012 (SCI-Expanded)

Convective heat transfer of Al2O3-water nanofluids in a microchannel heat sink

Duangthongsuk W., DALKILIÇ A. S., Wongwises S.

Current Nanoscience , cilt.8, sa.3, ss.317-322, 2012 (SCI-Expanded)

Correlations for evaporation heat transfer coefficient and two-phase friction factor for R-134a flowing through horizontal corrugated tubes

Laohalertdecha S., DALKILIÇ A. S., Wongwises S.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.38, sa.10, ss.1406-1413, 2011 (SCI-Expanded)

Numerical investigation of heat transfer and pressure drop in enhanced tubes

AĞRA Ö., Demir H., ATAYILMAZ Ş. Ö., Kantaş F., DALKILIÇ A. S.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.38, sa.10, ss.1384-1391, 2011 (SCI-Expanded)

Investigation of empirical correlations on the determination of condensation heat transfer characteristics during downward annular flow of R134a inside a vertical smooth tube using artificial intelligence algorithms

Balcilar M., DALKILIC A. S., BOLAT B., WONGWISES S.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.25, sa.10, ss.2683-2701, 2011 (SCI-Expanded)

Condensation pressure drop characteristics of various refrigerants in a horizontal smooth tube

Dalkilic A. S.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.38, sa.4, ss.504-512, 2011 (SCI-Expanded)

Numerical investigation on the single phase forced convection heat transfer characteristics of TiO2 nanofluids in a double-tube counter flow heat exchanger

Demir H., Dalkılıç A. S., Kürekci N. A., Duangthongsuk W., Wongwises S.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.38, sa.2, ss.218-228, 2011 (SCI-Expanded)

Experimental analysis for the determination of the convective heat transfer coefficient by measuring pressure drop directly during annular condensation flow of R134a in a vertical smooth tube

DALKILIÇ A. S., Teke I., Wongwises S.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.54, sa.4, ss.1008-1014, 2011 (SCI-Expanded)

Experimental Study on the Modeling of Condensation Heat Transfer Coefficients in High Mass Flux Region of Refrigerant HFC-134a Inside the Vertical Smooth Tube in Annular Flow Regime

HEAT TRANSFER ENGINEERING , cilt.32, sa.1, ss.33-44, 2011 (SCI-Expanded)

Two-Phase Heat Transfer Coefficients of R134a Condensation in Vertical Downward Flow at High Mass Flux

Balcilar M., DALKILIÇ A. S., WONGWISES S.

HEAT TRANSFER - THEORETICAL ANALYSIS, EXPERIMENTAL INVESTIGATIONS AND INDUSTRIAL SYSTEMS , ss.15-32, 2011 (SCI-Expanded)

Artificial neural network techniques for the determination of condensation heat transfer characteristics during downward annular flow of R134a inside a vertical smooth tube

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.38, sa.1, ss.75-84, 2011 (SCI-Expanded)

New experimental approach on the determination of condensation heat transfer coefficient using frictional pressure drop and void fraction models in a vertical tube

ENERGY CONVERSION AND MANAGEMENT , cilt.51, sa.12, ss.2535-2547, 2010 (SCI-Expanded)

A performance comparison of vapour-compression refrigeration system using various alternative refrigerants

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.37, sa.9, ss.1340-1349, 2010 (SCI-Expanded) Sürdürülebilir Kalkınma

An investigation of a model of the flow pattern transition mechanism in relation to the identification of annular flow of R134a in a vertical tube using various void fraction models and flow regime maps

EXPERIMENTAL THERMAL AND FLUID SCIENCE , cilt.34, sa.6, ss.692-705, 2010 (SCI-Expanded)

Validation of void fraction models and correlations using a flow pattern transition mechanism model in relation to the identification of annular vertical downflow in-tube condensation of R134a

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.37, sa.7, ss.827-834, 2010 (SCI-Expanded)

Comparison of frictional pressure drop models during annular flow condensation of R600a in a horizontal tube at low mass flux and of R134a in a vertical tube at high mass flux

DALKILIÇ A. S., AĞRA Ö., Teke I., Wongwises S.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.53, ss.2052-2064, 2010 (SCI-Expanded)

Experimental investigation of heat transfer coefficient of R134a during condensation in vertical downward flow at high mass flux in a smooth tube

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.36, sa.10, ss.1036-1043, 2009 (SCI-Expanded)

Intensive literature review of condensation inside smooth and enhanced tubes

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.52, ss.3409-3426, 2009 (SCI-Expanded)

Effect of void fraction models on the film thickness of R134a during downward condensation in a vertical smooth tube

DALKILIÇ A. S., YILDIZ S., WONGWİSES S.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.36, sa.2, ss.172-179, 2009 (SCI-Expanded)

Experimental investigation of convective heat transfer coefficient during downward laminar flow condensation of R134a in a vertical smooth tube

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , cilt.52, ss.142-150, 2009 (SCI-Expanded)

Two-phase friction factor in vertical downward flow in high mass flux region of refrigerant HFC-134a during condensation

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.35, sa.9, ss.1147-1152, 2008 (SCI-Expanded)

Effect of void fraction models on the two-phase friction factor of R134a during condensation in vertical downward flow in a smooth tube

Karakoyun Y., AÇIKGÖZ Ö., DALKILIÇ A. S., YUMURTACI Z.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER , cilt.35, sa.8, ss.921-927, 2008 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

A case study on the modeling and simulation of UAVs

KOÇ O. K., SERTKAYA A., GÖNÜL A., TANER T., DALKILIÇ A. S.

Journal of Thermal Engineering , cilt.10, sa.1, ss.164-174, 2024 (ESCI)

Determination of Optimum Insulation Thickness in Submarines

Durmaz S., Çolak A. B., Mercan H., Dalkiliç A. S.

Journal of Thermal Engineering , cilt.6, sa.9, ss.1655-1666, 2023 (ESCI)

COMPREHENSIVE REVIEW ON THE FLOW CHARACTERISTICS OF TWO-PHASE FLOWS IN INCLINED TUBES

Karademir H., Ozcelik G., Açıkgöz Ö., Dalkılıç A. S., İnce İ. T., Meyer J., et al.

JOURNAL OF THERMAL ENGINEERING , cilt.7, sa.3, ss.483-549, 2021 (ESCI)

An experimental investigation on radiant floor heating systems at various operating conditions

Journal of Thermal Engineering , cilt.6, sa.5, ss.751-771, 2020 (ESCI)

Professor somchai wongwises on his 60th birthday

Awad M. M., Mondal P. K., Mahian O., Ahn H. S., DALKILIÇ A. S., Pop I., et al.

Journal of Thermal Engineering , cilt.6, sa.4, ss.438-439, 2020 (ESCI)

DETERMINATION OF SOME DOMESTIC RADIATORS' THERMAL CAPACITY NUMERICALLY

Dalkılıç A. S., Açıkgöz Ö., Ekici E., Wongwıses S.

JOURNAL OF THERMAL ENGINEERING , cilt.5, ss.251-270, 2019 (ESCI)

NUMERICAL ANALYSES ON THE PREDICTION OF NUSSELT NUMBERS FOR UPWARD AND DOWNWARD FLOWS OF WATER IN A SMOOTH PIPE: EFFECTS OF BUOYANCY AND PROPERTY VARIATIONS

DALKILIÇ A. S., Cebi A., Celen A.

JOURNAL OF THERMAL ENGINEERING , cilt.5, sa.3, ss.166-180, 2019 (ESCI)

A FEASIBILITY STUDY OF SOLAR ENERGY-TECHNO ECONOMIC ANALYSIS FROM AKSARAY CITY, TURKEY

Taner T., DALKILIÇ A. S.

JOURNAL OF THERMAL ENGINEERING , cilt.5, sa.1, ss.25-30, 2019 (ESCI)

Experimental Investigation on the Performance of a Parallel Plate-Based Active Magnetic Regenerator

Keawkamrop T., DALKILIÇ A. S., Asirvatham L. G., Amani J., Mahian O., Wongwises S.

INTERNATIONAL JOURNAL OF AIR-CONDITIONING AND REFRIGERATION , cilt.26, sa.2, 2018 (ESCI)

A REVIEW OF FLOW BOILING IN MINI AND MICROCHANNEL FOR ENHANCED GEOMETRIES

Cebi A., CELEN A., Donmez A. H., KARAKOYUN Y., CELEN P., Cellek M. S., et al.

JOURNAL OF THERMAL ENGINEERING , cilt.4, sa.3, ss.2037-2074, 2018 (ESCI)

A NONLINEAR CONSTITUTIVE THEORY FOR HEAT CONDUCTION IN LAGRANGIAN DESCRIPTION BASED ON INTEGRITY

Surana K. S., Joy A. D., Kedari S. R., Nunez D., Reddy J. N., DALKILIÇ A. S.

JOURNAL OF THERMAL ENGINEERING , cilt.3, sa.6, ss.1615-1631, 2017 (ESCI)

Measurement of Similarity in Academic Contexts

Mahian O., Treutwein M., Estelle P., Wongwises S., Wen D., Lorenzini G., et al.

PUBLICATIONS , cilt.5, sa.3, 2017 (ESCI)

PARAMETRIC STUDY OF ENERGY, EXERGY AND THERMOECONOMIC ANALYSES ON VAPOR-COMPRESSION SYSTEM CASCADED WITH LIBR/WATER AND NH3/WATER ABSORBTION CASCADE REFRIGERATION CYCLE

Dalkılıç A. S., Celen A., Çebi A., Taner T., Wongwıses S.

Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik , cilt.18, ss.78-96, 2017 (Hakemli Dergi)

CFD analysis of smoke and temperature control system of an indoor parking lot with jet fans

Senveli A., Dizman T., Celen A., Bilge D., DALKILIÇ A. S., Wongwises S.

Journal of Thermal Engineering , cilt.1, sa.2, ss.116-130, 2015 (ESCI)

A critical review on condensation heat transfer in microchannels and minichannels

Awad M., DALKILIÇ A. S., Wongwises S.

Journal of Nanotechnology in Engineering and Medicine , cilt.5, sa.1, 2014 (Scopus)

A REVIEW ON THE HEAT-TRANSFER PERFORMANCE AND PRESSURE-DROP CHARACTERISTICS OF VARIOUS ENHANCED TUBES

Laohalertdecha S., DALKILIÇ A. S., Wongwises S.

INTERNATIONAL JOURNAL OF AIR-CONDITIONING AND REFRIGERATION , cilt.20, sa.4, 2012 (ESCI)

Nucleate pool boiling heat transfer correlation for TiO2-water nanofluids

Suriyawong A., DALKILIÇ A. S., Wongwises S.

ASTM Special Technical Publication , cilt.1567, ss.171-188, 2012 (Scopus)

Boru içinde yogusmada isi transferi katsayisinin tespiti

T.M.M.O. Tesisat Muhendisligi Dergisi , sa.113, ss.50-60, 2009 (Hakemli Dergi)

Kapali yuzme havuzlarinda iklimlendirme

T.M.M.O. Tesisat Muhendisligi Dergisi , cilt.104, ss.64-66, 2008 (Hakemli Dergi)

Doner tip isi degistiricileri ve ornek bir uygulama

Demir H., Kürekci N. A., Dalkılıç A. S.

T.M.M.O. Tesisat Muhendisligi Dergisi , cilt.107, ss.5-12, 2008 (Hakemli Dergi)

OTOMOBİL RADYATÖRLERİNDE BASINÇ KAYIPLARININ YAPAY SİNİR AĞLARI YARDIMIYLA MODELLENMESİ

Tesisat Mühendisliği , sa.108, ss.65-69, 2008 (Hakemli Dergi)

Bir Fırına Ait Bacadan Isı Değiştirici Yardımıyla Atık Isı Geri Kazanımı

Dalkılıç A. S., Kürekci N. A., Demir H.

Tesisat Mühendisliği , cilt.108, ss.5-11, 2008 (Hakemli Dergi)

Ic yuzeyi mikro kanatli borularda yoguşma

T.M.M.O. Tesisat Muhendisligi Dergisi , cilt.106, ss.38-46, 2008 (Hakemli Dergi)

Bir firin bacasindan isi degiştirici yardimiyla atik isi geri kazanimi

Kürekci N. A., Demir H., Dalkılıç A. S.

T.M.M.O. Tesisat Muhendisligi Dergisi , cilt.108, sa.5, 2008 (Hakemli Dergi)

Döner Tip Isı Değiştiricileri ve Örnek Bir Uygulama. Tesisat Mühendisliği

Tesisat Mühendisliği , cilt.107, ss.5-12, 2008 (Hakemli Dergi)

Bir dokme lpg tesisine ait ornek uygulama

T.M.M.O. Tesisat Muhendisligi Dergisi , cilt.107, ss.32-36, 2008 (Hakemli Dergi)

Bir Endüstriyel Tesis Bacasındaki Atık Gaz Akışının Sayısal İncelenmesi

KOYUN A., Demir H., Dalkılıç S.

Tesisat Mühendisliği , 2006 (Hakemsiz Dergi)

Kapali yuzme havuzlarında buharlasma miktarinin hesaplanmasi

Kılıç S., Taner T., Dalkılıç A. S.

Tesisat Teknigi Dergisi , cilt.111, ss.186-188, 2005 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

A BRIEF LITERATURE REVIEV ON THE CONDENSATION CHARACTERISTICS OF INCLINED DOUBLE PIPE HEAT EXCHANGERS HAVING SMOOTH AND CORUGATED TUBES

Altunal U., Server A., Mercan H., Dalkılıç A. S., Wongvises S.

ICAME 2021, İstanbul, Türkiye, 20 - 22 Ekim 2021, ss.1550

SHORT LITERATURE REVIEW ON THE BOILING HEAT TRANSFER CHARACTERISTICS OF INCLINED DOUBLE PIPE HEAT EXCHANGERS

Server A., Altunal U., Mercan H., Dalkılıç A. S., Wongvises S.

ICAME 2021, İstanbul, Türkiye, 20 - 22 Ekim 2021, ss.1547

SHORT LITERATURE SUMMARY ON THE SINGLE-PHASE FLOW HEAT TRANSFER CHARACTERISTICS OF TRIPLE PIPE HEAT EXCHANGERS

Demirel P., Akgul D., Kesen A., Mercan H., Dalkılıç A. S., Wongvises S.

ICAMe 2021, İstanbul, Türkiye, 20 - 22 Ekim 2021, ss.1546

INVESTIGATION OF STABILITY SYNTHESIZED TITANIUM NANOFLUIDS BY OXIDATION AT HIGH TEMPERATURES

Arslan R., Akyol E., Dalkılıç A. S., Wongwises S.

6th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 20 - 22 Ekim 2021, ss.1548

A REVIEW OF NANOTECHNOLOGICAL ADVANCES ABOUT ANODE MATERIALS TO IMPROVE THE PERFORMANCE OF ELECTRIC VEHICLE LITHIUM-ION BATTERIES

6th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 20 - 22 Ekim 2021, ss.1458-1466 Sürdürülebilir Kalkınma

ENERGY BALANCE AND EXERGY EFFİCİENCY WİTH THE SAMPLE CFD PROGRAM OF SPORTS TECHNOLOGİES

Öztürk M., Taner T., Dalkılıç A. S.

6th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 20 - 22 Ekim 2021, ss.1256-1265

INVESTIGATION OF THE EFFECT OF FLOW CHANNEL DESGIN ON PEM FUEL CELL VOLTAGE

Eroğlu L., Taner T., Dalkılıç A. S.

6th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 20 Ekim 2021 - 22 Ocak 2022, ss.1555

TECHNICALITY OF THE EXPERIMENTAL SETUP FOR THE INVESTIGATION OF RADIANT HEATING/COOLING SYSTEMS

Camcı M., Karakoyun Y., Açıkgöz Ö., Dalkılıç A. S.

6th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 20 - 22 Ekim 2021, ss.1422-1431

EXPERIMENTAL SETUP DESIGN FOR INVESTIGATION OF FLOW BOILING HEAT TRANSFER CHARACTERISTICS OF R-134A IN HELICALLY COILED TUBES WITH SMOOTH AND CORRUGATED SURFACES

Kırkar Ş. M., Dalkılıç A. S.

6th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 20 - 22 Ekim 2021, ss.605-610

OPTIMUM INSULATION THICKNESS IN SUBMARINE

Dalkılıç A. S., Durmaz S., Çolak A. B., Wongwises S.

6th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 20 - 22 Ekim 2021, ss.1562

Analysis of thermal comfort in room via computational fluid dynamics

Özsağiroğlu S., Camcı M., Dalkılıç A. S.

3th International Congress on Engineering and Technology Management, İstanbul, Türkiye, 16 - 17 Nisan 2020, ss.69

A short review of internal mixed convective heat transfer at building applications

Camcı M., Açıkgöz Ö., Dalkılıç A. S.

5th international conference on advances in mechanical engineering Istanbul 2019, İstanbul, Türkiye, 17 - 19 Aralık 2019, ss.1386-1393

INVESTIGATION OF CONDENSATION CHARACTERISTICS FOR INCLINED PIPES ON RECENT LITERATURE

Özçelik G., İnce İ. T., Bedir H. İ., Dalkılıç A. S., Wongwises S.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICALENGINEERING ISTANBUL 2019, İstanbul, Türkiye, 17 - 19 Aralık 2019

BRIEF LITERATURE REVIEW ON THE BOILING HEAT TRANSFER CHARACTERISTICS OF INCLINED TUBES

Karademir H., AÇIKGÖZ Ö., CELEN A., DALKILIÇ A. S., Wongwises S.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Türkiye, 17 - 19 Aralık 2019

SIMULATION OF FLUID STRUCTURE INTERACTION AROUND A BEAM AT VARIOUS SHAPES AND INCLINATION ANGELS

TABATABAEI MALAZI M., AFSHARI F., DALKILIÇ A. S.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICALENGINEERING ISTANBUL 2019, İstanbul, Türkiye, 17 - 19 Aralık 2019

INVESTIGATION OF THE COAL AND BIOMASS FUELS EFFECTS ON BOILER EFFICIENCY IN COGENERATION POWER PLANTS

Berber Ş., TANER T., DALKILIÇ A. S.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Türkiye, 17 - 19 Aralık 2019 Sürdürülebilir Kalkınma

AERODYNAMIC ANALYSIS AND AERO PACKAGE OPTIMIZATION IN TRUCKS

DALKILIÇ A. S., GÖNÜL A., Kırklaroğlu M., Deniz Y., Koç O. K.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICALENGINEERING ISTANBUL 2019, İstanbul, Türkiye, 17 - 19 Aralık 2019

BRIEF LITERATURE REVIEW ON THE SINGLE-PHASE FLOW HEAT TRANSFER CHARACTERISTICS OF HELICAL COILS

Akgül D., KIRKAR Ş. M., ÖNAL B. S., CELEN A., AÇIKGÖZ Ö., DALKILIÇ A. S., et al.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Türkiye, 17 - 19 Aralık 2019

BRIEF LITERATURE REVIEW ON THE FLOW BOILING HEAT TRANSFER CHARACTERISTICS OF HELICAL COILS

KIRKAR Ş. M., Akgül D., ÖNAL B. S., DALKILIÇ A. S., Wongwises S.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Türkiye, 17 - 19 Aralık 2019

Production of Carbon Fibers and Paper From Vegetable Fibers for Fuel Cells

Düzgün Z., TANER T., DALKILIÇ A. S.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Türkiye, 17 - 19 Aralık 2019

BRIEF LITERATURE REVIEW ON THE CONDENSATION HEAT TRANSFER CHARACTERISTICS OF HELICAL COILS

ÖNAL B. S., KIRKAR Ş. M., Akgül D., CELEN A., AÇIKGÖZ Ö., DALKILIÇ A. S., et al.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Türkiye, 17 - 19 Aralık 2019

A REVIEW ON NANOFLUIDS VISCOSITY AND DENSITY EFFECTS ON THERMAL APPLICATIONS

Arslan R., Akyol E., Dalkılıç A. S., Wongwises S.

5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2019, İstanbul, Türkiye, 17 - 19 Aralık 2019, ss.2326-2341

Production of carbon fibers and paper from vegetable fibers for using fuel cells

Düzgün Z., TANER T., DALKILIÇ A. S.

5th Conference On Advances in Mechanical Engineering Icame 2019, İstanbul, Türkiye, 19 - 21 Aralık 2019

NUMERICAL INVESTIGATION ON HEAT TRANSFER AND PRESSURE DROP CHARACTERISTICS OF HELICALLY COILED HEAT EXCHANGERS

Kırkar Ş. M., İren K., Gönül A., Celen A., Dalkılıç A. S.

World Energy Strategies Congress and Exhibition (WESCE-2019), İstanbul, Türkiye, 26 - 28 Ağustos 2019

A research on heat transfer characteristics of hairpin heat exchangers numerically

Dallı O., DALKILIÇ A. S., GÖNÜL A., İren K., TANER T.

5. Uluslararasi Muhendislik Mimarlik ve Tasarim Kongresi, 23 - 24 Nisan 2019

NATURAL GAS DISTRIBUTION NETWORK IN SUPPLY SECURITY SUPPORT: DEMAND FORECAST STUDY FOR ISTANBUL

Balıkçı V., Dalkılıç A. S.

4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, İstanbul, Türkiye, 19 - 21 Aralık 2018, cilt.1, ss.37

Numerical Optimization of Pin Fin Heat Sink for Electronic Cooling

Türk O. A., Yavaş M., Celen A., Dukhan N., Dalkılıç A. S.

4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, İstanbul, Türkiye, 19 - 21 Aralık 2018, cilt.1, ss.129-135

Numerical Investigation on the External Flow of Tube Bank

Dalkılıç A. S., Çebi A., Batur A., Wongwises S.

4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, İstanbul, Türkiye, 19 - 21 Aralık 2018, cilt.1, ss.129-135

3-Dimensional Numerical Simulation of Helical Coil Heat Exchangers

Gönül A., Mercan H., Dalkılıç A. S.

4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, İstanbul, Türkiye, 19 - 21 Aralık 2018, cilt.1, ss.1097

Cooling Technology and Thermodynamic Applications for Food Preservation

Taner Ö., Taner T., Dalkılıç A. S.

4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, İstanbul, Türkiye, 19 - 21 Aralık 2018, cilt.1, ss.1133-1136

DETERMINATION OF THE VISCOSITY CHARACTERISTICS OF WATER BASEDSİO2-GRAPHITE HYBRID NANOFLUIDS

Dalkılıç A. S., Açıkgöz Ö., Küçükyıldırım B. O., Akdoğan Eker A.

4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, 19-21 DECEMBER 2018, İstanbul, Türkiye, 19 - 21 Aralık 2018, cilt.1, ss.1844-1855

An Experimental Investigation on Heat Transfer Characteristics over an Underfloor Heating System

Açıkgöz Ö., Karakoyun Y., Dalkılıç A. S.

4TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2018, 19-21 DECEMBER 2018, İstanbul, Türkiye, 19 - 21 Aralık 2018, cilt.1, ss.1831-1843

Experiments on Determination of Heat Transfer Coefficients for a Radiant Heated Enclosure

Karakoyun Y., Dalkılıç A. S., Yumurtacı Z., Açıkgöz Ö., Demirtaş S.

INTERNATIONAL ENGINEERING AND TECHNOLOGY SYMPOSIUM, Batman, Türkiye, 3 - 05 Mayıs 2018, cilt.1, sa.1, ss.1240-1245

A review of energy management in industry

Öztuna Taner Ö., Taner T., Dalkılıç A. S.

3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2017, İstanbul, Türkiye, 19 - 21 Aralık 2017, ss.262-269

An Investigation to Determine Heat Transfer Characteristics of R134a Used In Smooth and Microfin Pipes

Celen A., Dalkılıç A. S., Açıkgöz Ö.

3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2017, İstanbul, Türkiye, 19 - 21 Aralık 2017, ss.1-15

AN EXAMINATION OF FLOW BOILING OF R134A THROUGH A MULTI-MICROCHANNEL HEAT SINK

Dalkılıç A. S., Açıkgöz Ö., Wongwıses S.

3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2017, İstanbul, Türkiye, 19 - 21 Aralık 2017, ss.1-15

An Investigation to Acquire Radiative Heat Transfer Coefficients in a Radiant Ceiling Cooling Application

Açıkgöz Ö., Celen A., Dalkılıç A. S.

3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2017, İstanbul, Türkiye, 19 - 21 Aralık 2017, ss.1-15

Determination of Design Parameters Effects on the Cost of a Double-Pipe Heat Exchanger

Dalkılıç A. S., Mercan H., Özçelik G.

3rd INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL 2017, İstanbul, Türkiye, 19 - 21 Aralık 2017, ss.1-15

CFD analyses on the cooling of electronic chipsets using various types of heat sinks

Dalkılıç A. S., Ekici E., Kılıç B., Nuhoğlu U., Kaya M. A., Wongwıses S.

1th INTERNATIONAL CONFERENCE ON ADVANCES IN ENGINEERING SCIENCES: THAILAND 2017, Chon-Buri, Tayland, 3 - 05 Temmuz 2017, ss.1-15

Experımental apparatus for the determinatıon of heat transfer coefficıents for radiant heating/cooling systems

Karakoyun Y., Dalkılıç A. S., Yumurtacı Z., Çakır A., Ayten F., Toka M.

1th INTERNATIONAL CONFERENCE ON ADVANCES IN ENGINEERING SCIENCES: THAILAND 2017, Phuket, Tayland, 3 - 05 Temmuz 2017

Experimental Analyses on the Single Stage Vapor Compression Cycle

Dalkılıç A. S., Wongwıses S., Ekici E., Kılıç B.

1th INTERNATIONAL CONFERENCE ON ADVANCES IN ENGINEERING SCIENCES: THAILAND 2017, Chon-Buri, Tayland, 3 - 05 Temmuz 2017, ss.1-15

A Feasibility Study of Solar Energy-Economic Analysis from Aksaray, Turkey

TANER T., DALKILIÇ A. S.

INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING: ISTANBUL 2017, İstanbul, Türkiye, 25 - 28 Nisan 2017, ss.537-540

SINGLE-PHASE TURBULENT FLOW OF R-134A IN A MULTIPORTMICROCHANNEL HEAT SINK

Dalkılıç A. S., Yılmaz S., Sakamatapan K., Wongwıses S.

1th INTERNATIONAL CONFERENCE ON ENERGY ANDTHERMAL ENGINEERING, İstanbul, Türkiye, 25 - 28 Nisan 2017, ss.1-15

Determination of the Viscosity of refrigeration Compressor Oils Withcarbon Nanotubes

Dalkılıç A. S., Öztürk H. T., Eker Akdoğan A., Küçükyıldırım B. O., Jumpholkul C., Wongwıses S.

1th INTERNATIONAL CONFERENCE ON ADVANCES INSCIENCE AND ARTS, İstanbul, Türkiye, 29 - 31 Mart 2017, ss.1-15

CFD ANALYSIS ON THE INNER FLUID’S OPTIMUM VELOCITY IN A PIPE IN PIPE HEAT EXCHANGER

Dalkılıç A. S., Demir H., Kılıç B., Wongwıses S.

ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017 – ICPAS 2017, İstanbul, Türkiye, 4 - 06 Ocak 2017, ss.1-15

Numerical Solution of Heat Exchanger Used in Petroleum Industry

Bander Kanaan M., Cellek M. S., Dalkılıç A. S., Heperkan H. A.

1th INTERNATIONAL CONFERENCE ON PROGRESS IN APPLIED SCIENCE, İstanbul, Türkiye, 4 - 06 Ocak 2017, ss.1-15 Sürdürülebilir Kalkınma

Validation of domestic radiators’ thermal capacity with a numerical software

Dalkılıç A. S., Açıkgöz Ö., Ekici E., Wongwıses S.

INTERNATIONAL CONFERENCE ON ENERGY AND THERMAL ENGINEERING: ISTANBUL 2017, İstanbul, Türkiye, 4 - 06 Ocak 2017, ss.1-15

An experimental investigation on the use of natural gas diesel fuel mixture on performance and emissions of a CI engine

Karagöz Y., Sandalcı T., Işın Ö., Dalkılıç A. S.

International Conference on Mechanical and Production Engineering, Bangkok, Tayland, 13 - 14 Temmuz 2016, ss.1-15

Pin on disk test for aluminum graphene metal matrix composites

İstif İ., Tunçel M., Dalkılıç A. S.

International Conference on Mechanical and Aeronautical Engineering, Bangkok, Tayland, 13 - 14 Temmuz 2016, ss.58-61

Investigation and generalization of convective heat transfer in different room geometries

Açıkgöz Ö., Dalkılıç A. S., Wongwıses S.

Conference on Mechanical and Production Engineering, Chon-Buri, Tayland, 13 - 14 Temmuz 2016, ss.1-15

Thermoeconomic analysis aimed parametric study on the vapor compression system cascaded with NH3 water absorption cascade refrigeration cycle

Dalkılıç A. S., Celen A., Çebi A., Sandalcı T., Berk M., Semih O.

International Conference on Mechanical and Production Engineering, Chon-Buri, Tayland, 13 - 14 Temmuz 2016, ss.1-15

The heat transfer analysis of plate fin heat exchanger used for energy recovery application a case study

Celen A., Aslan E., Celen P., Çebi A., Dalkılıç A. S.

Conference of the International Journal of Arts & Sciences, Barcelona, İspanya, 23 - 26 Mayıs 2016, cilt.9, ss.1-15

Determination of R134a s convective heat transfer coefficient in horizontal evaporators having smooth and corrugated tubes

Dalkılıç A. S., Açıkgöz Ö., Tapan Ş., Wongwıses S.

International Conference on Mechanical and Production Engineering, Chon-Buri, Tayland, 13 - 14 Mayıs 2016

Calculation procedure of double pipe heat exchanger design having nanofluid flow

Dalkılıç A. S.

International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 10 - 13 Mayıs 2016, ss.963-965

Experimental apparatus design for study of pool boiling heat transfer characteristics of Al2O3 water nanofluids on a horizontal cylindrical heating surface

Dalkılıç A. S., Açıkgöz Ö.

International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 10 - 13 Mayıs 2016, ss.1-15

New approach on the determination of the total heat transfer coefficient in radiant wall heating systems

International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 10 - 13 Mayıs 2016, ss.1-15

A numerical investigation on the convective heat transfer coefficient in radiant ceiling cooling systems

Dalkılıç A. S., Açıkgöz Ö.

International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 10 - 13 Mayıs 2016, ss.1-15

Experımental apparatus desıgn for study of heat transfer and flow characteristics of water flowing through internally grooved tubes

International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 10 - 13 Mayıs 2016, ss.1-15

COMPUTATIONAL INVESTIGATION OVER CONVECTIVE HEAT TRANSFER IN RADIANT HEATED LIVING PLACES

INTERNATIONAL CONFERENCE ON ENERGY SYSTEMS ISTANBUL 2015, İstanbul, Türkiye, 23 - 25 Aralık 2015, ss.1055-1058

Fundamental Basis and Implementation of Shell and Tube Heat Exchanger Project Design: Condenser Study

Tunçer E., Sandalcı T., Karagöz Y., Dalkılıç A. S.

INTERNATIONAL CONFERENCE ON ENERGY SYSTEMS ISTANBUL 2015, İstanbul, Türkiye, 23 - 25 Aralık 2015, ss.1059-1066

EXPERIMENTALLY DETERMINATION OF INJECTION CHARACTERISTIC OF A MECHANICAL FUEL SYSTEM EQUIPPED DIESEL ENGINE CONVERTED TO COMMON RAIL FUEL SYSTEM

INTERNATIONAL CONFERENCE ON ENERGY SYSTEMS ISTANBUL, İstanbul, Türkiye, 23 - 25 Aralık 2015, ss.1-15

EFFECT OF FUEL TEMPERATURE ON PERFORMANCE AND EMISSIONS OF ACOMPRESSION IGNITIONENGINE

Karagöz Y., Guler İ., Duymaz G., Yüksek L., Sandalcı T., Dalkılıç A. S.

INTERNATIONAL CONFERENCE ON ENERGY SYSTEMS ISTANBUL, İstanbul, Türkiye, 23 - 25 Aralık 2015, ss.1-15

Experimental Apparatus For The Determination of VelocityDistribution of Hot Round Jet in Cross Flow

Sevindir M. K., Dalkılıç A. S., Heperkan H. A.

INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Türkiye, 13 - 15 Mayıs 2015, ss.136-140

Fundamental basis and implementation of shell and tube heat exchanger project design Evaporator Study

Dalkılıç A. S., Tapan Ş., Wongwises S.

International Conference on Mechanical and Production Engineering (2015), July 11-12, Thailand., Chon-Buri, Tayland, 11 - 12 Temmuz 2015, ss.283-291

EXPERIMENTAL APPARATUS FOR THE DETERMINATION OF VELOCITY DISTRIBUTION OF HOT ROUNDA JET IN CROSS FLOW

Sevindir M. K., Dalkılıç A. S., Heperkan H. A.

INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, İstanbul, Türkiye, 13 - 15 Mayıs 2015, ss.1-15

Numerical investigation of the single phase forced convection heat transfer characteristics of Nanofluid flowing in circular and noncircular tubes

Kayaci N., Dalkılıç A. S., Malazı M. T., Wongwıses S.

ASME 2015 International Mechanical Engineering Congress and Exposition, IMECE 2015, Texas, Amerika Birleşik Devletleri, 13 - 19 Kasım 2015

The investigation of convective heat transfer in different room geometries by means of numerical solution techniques

AÇIKGÖZ Ö., DALKILIÇ A. S., Kıncay O., Wongwises S.

Energy Technologies Conference (ENTECH14), 22 - 24 Aralık 2014

A critical review on condensation heat transfer in microchannels and minichannels

Awad M., DALKILIÇ A. S., Wongwises S.

Proceedings of the 15th International Heat Transfer Conference (2014), 10 - 15 Ağustos 2014

Effect of the heat recovery system to the performance of air handling unit of workplace

DALKILIÇ A. S., CELEN A., Şenlen A., ÇEBİ A., Wongwises S.

ASME 2014 Fluids Engineering Summer Meeting (FEDSM2014), 3 - 07 Ağustos 2014

Thermodynamic analysis of solar heat pump assisted heating systems

Siyahhan Türkgenç Z., Çebi A., Celen A., Dalkılıç A. S., Wongwises S.

ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting, FEDSM 2014, Collocated with the ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels, Illinois, Amerika Birleşik Devletleri, 3 - 07 Ağustos 2014

Determination of pressure drop of pure water flowing upward direction in a double tube heat exchanger having smooth and microfin tubes

Çebi A., Celen A., Dalkılıç A. S., Sevindir M. K., Wongwıses S.

Effect of the heat recovery system to the performance of air handling unit of a workplace

Senlen O. A., Celen A., Çebi A., Dalkılıç A. S., Wongwıses S.

Refrigerated railroad car design for shipping frozen meat using alternative refrigerants

Alkan B., Celen A., Çebi A., Dalkılıç A. S., Wongwıses S.

Application of artificial neural networks to predict heat transfer from buried pipe for ground source heat pump applications

DEMİR H., Atayilmaz Ö. Ş., AĞRA Ö., DALKILIÇ A. S.

ASME 2013 Heat Transfer Summer Conference, HT 2013 Collocated with the ASME 2013 7th International Conference on Energy Sustainability and the ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology, Minneapolis, MN, Amerika Birleşik Devletleri, 14 - 19 Temmuz 2013, cilt.4

A critical review on the determination of pressure drop during condensation in smooth and enhanced tubes

DALKILIÇ A. S., Celen A., AWAD M. M., WONGWISES S.

A critical review on the determination of convective heat transfer coefficient during condensation in smooth and enhanced tubes

DALKILIÇ A. S., Celen A., Awad M. M., WONGWISES S.

FUndamental basis and application of cold-room project design: A case study of frigoship

ÖZTÜRK M., GOKTEPE E., Celen A., Çebi A., DALKILIÇ A. S., WONGWISES S.

Fundamental basis and application of cold-room project design: A case study of fisherman

ÖZTÜRK M., Göktepe E., DALKILIÇ A. S., CELEN A., Wongwises S.

ASME 2013 Summer Heat Transfer Conference, 14 - 19 Temmuz 2013

A critical review on the determination of convective pressure drop during condensation in smooth and enhanced tubes

DALKILIÇ A. S., CELEN A., Awad M., Wongwises S.

ASME 2013 Summer Heat Transfer Conference, 14 - 19 Temmuz 2013

EFFECT OF THE HEAT RECOVERY SYSTEM TO THE PERFORMANCE OF AIR HANDLING UNIT OF A SHOPPING CENTRE

Kelasovali F., Celen A., Kayaci N., DALKILIÇ A. S., Wongwises S.

ASME International Mechanical Engineering Congress and Exposition, Texas, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, ss.685-691

PREDICTION OF PRESSURE DROP OF VARIOUS REFRIGERANTS DURING CONDENSATION IN HORIZONTAL SMOOTH AND MICRO-FIN TUBES BY MEANS OF ARTIFICIAL NEURAL NETWORKS

Balcılar M., Dalkılıç A. S., Atayılmaz Ş. Ö., Demir H., Wongwıses S.

ASME International Mechanical Engineering Congress and Exposition, Texas, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, ss.303-312

Effect of the heat recovery system to the performance of air handling unit of a shopping centre of a shopping centre

KELASOVALI F., Celen A., Kayaci N., DALKILIÇ A. S., WONGWISES S.

ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012, Houston, TX, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, cilt.6, ss.685-691

A critical review on the numerical methods of two-phase flows

BALCILAR M., CELEN A., KAYACI N., DALKILIÇ A. S., Wongwises S.

ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012, Houston, TX, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, cilt.7, ss.289-302

A critical review on the numerical methods of two-phase flows

Balcilar M., DALKILIÇ A. S., Çelen A., Kayaci N., WONGWISES S.

ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012, Houston, TX, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, cilt.7, ss.289-302

Determination of two-phase flow void fraction of r600a in a horizontal smooth tube

AĞRA Ö., DEMİR H., ATAYILMAZ Ş. Ö., YURTSEVEN A., DALKILIÇ A. S., WONGWISES S.

ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012, Houston, TX, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, cilt.7, ss.2547-2561

The design of a yacht-Type chiller

KAYKI M., Celen A., Kayaci N., DALKILIÇ A. S., WONGWISES S.

ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012, Houston, TX, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, cilt.7, ss.1533-1541

Numerical investigation of the single phase forced convection heat transfer characteristics of nanofluid flowing in smooth and micro-fin tubes

Kayaci N., Celen A., DALKILIÇ A. S., TABATABAEI M., Yildiz O., WONGWISES S.

ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012, Houston, TX, Amerika Birleşik Devletleri, 9 - 15 Kasım 2012, cilt.7, ss.63-75

A critical review on the numerical methods of two phase flows

BALCILAR M., DALKILIÇ A. S., CELEN A., KAYACI N., Wongwises S.

ASME 2012, 12 - 17 Kasım 2012

Numerical investigation of heat trasfer enhancement using water based nanofluids flowing in enhanced tubes

KAYACI N., CELEN A., Tabatabaei M., YILDIZ O., DALKILIÇ A. S., Wongwises S.

ASME 2012 International Mechanical Engineering Congress Exposition, 9 - 15 Kasım 2012

A yacht-type chiller design

Kaykı M., KAYACI N., CELEN A., DALKILIÇ A. S., Wongwises S.

ASME 2012 International Mechanical Engineering Congress Exposition, 9 - 15 Kasım 2012

Critical review on the determination of physical properties of nanofluids for the convective heat transfer in tubes

DALKILIÇ A. S., KAYACI N., CELEN A., Daungthongsuk W., Wongwises S.

The 3rd TSME International Conference on Mechanical Engineering (2012), 24 - 26 Ekim 2012

Optimization of the relationship between the two-phase friction factor and reynolds equivalent number model by means of genetic algorithm

BOLAT B., Balcilar M., DALKILIÇ A. S., WONGWISES S.

ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011, Honolulu, HI, Amerika Birleşik Devletleri, 13 - 17 Mart 2011

Comparison of various alternative refrigerants for vapour compression refrigeration systems

DALKILIÇ A. S., WONGWISES S.

ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011, Honolulu, HI, Amerika Birleşik Devletleri, 13 - 17 Mart 2011

Prediction of two-phase friction factor of refrigerants inside a horizontal tube using CFD analysis for the homogeneous condensation flow

DALKILIÇ A. S., KÜREKCİ N. A., Wongwises S.

ASME-JSME-KSME Joint Fluids Engineering Conference, ASME-JSME-KSME (2011), 24 - 29 Temmuz 2011

Comparison of two-phase friction factors using Reynolds equivalent number model during annular laminar flow of R134a in a vertical tube at high mass flux

Balcilar M., Dalkılıç A. S., Wongwıses S.

ASME-JSME-KSME Joint Fluids Engineering Conference, ASME-JSME-KSME (2011), 24 - 29 Temmuz 2011

Optimization of the relationship between the two-phase friction factor and Reynolds equivalent number model by the means of Genetic Algorithm

Bolat B., Balcılar M., Dalkılıç A. S., Wongwises S.

ASME/JSME 2011 8th Thermal Engineering Joint Conference, Hawaii, Amerika Birleşik Devletleri, 13 - 17 Nisan 2011, ss.1-15

A numerical investigation of nanofluids forced convection flow in a horizontal smooth tube

Demir H., Dalkılıç A. S., Kürekci N. A., Keleşoǧlu B., Wongwıses S.

2010 14th International Heat Transfer Conference, IHTC 14, Washington, Amerika Birleşik Devletleri, 8 - 13 Ağustos 2010, cilt.6, ss.575-584

Determination of condensation heat transfer characteristics of R134a by means of artificial intellgence method

ASME 2010 International Mechanical Engineering Congress and Exposition, IMECE 2010, Vancouver, Kanada, 12 - 18 Kasım 2010, cilt.7, ss.151-160

Experimental study on the flow regime identification in the case of co-current condensation of R134a in a vertical smooth tube

Dalkılıç A. S., Wongwıses S.

2010 14th International Heat Transfer Conference, IHTC 14, Washington, Amerika Birleşik Devletleri, 8 - 13 Ağustos 2010, cilt.2, ss.1-10

Determination of condensation heat transfer characteristics of R134a by means of artificial intelligence method

Balcılar M., Dalkılıç A. S., Wongwises S.

International Mechanical Engineering Congress and Exposition, ASME (2010), New-York, Amerika Birleşik Devletleri, 12 - 18 Kasım 2010

Comparison of condensation frictional pressure drop models and correlations during annular flow of R134a inside a vertical tube